Boat-Specs.com

Sailboat specifications and datasheets

Xp 44 standard

The Xp 44, here in "standard" version, is a 43’7” monohull sailboat designed by X-Yachts Design Group. She was built by X-Yachts (Denmark) and made of sandwich Core-Cell / fiberglass / epoxy (composite infusion). The production started in 2011 .

The Xp 44 belongs to the Xp range. The Xp 44 is as well listed, on Boat-Specs.com, in version Deep draft.

X-Yachts Xp 44 X-Yachts Xp 44 sailplanX-Yachts Xp 44 layoutX-Yachts Xp 44 sailingX-Yachts Xp 44 sailingX-Yachts Xp 44 sailingX-Yachts Xp 44 sailingX-Yachts Xp 44 cockpitX-Yachts Xp 44 accommodationsX-Yachts Xp 44 accommodationsX-Yachts Xp 44 accommodationsX-Yachts Xp 44 accommodations
Xp 44's   Main Features
Model Xp 44
Version Standard
Type of hull Monohull
Category Offshore racer-cruiser sailboat
Shipyard
Designer X-Yachts Design Group
Range Xp
Construction Hull and deck:
sandwich Core-Cell / fiberglass / epoxy (composite infusion) with carbon fiber reinforcements in deck and keel trunk structure
First built hull 2011
Last built hull Still in production
Appendages Keel :
Fin with bulb
Helm 2 wheels
Rudder 1 spade rudder
Cockpit Open aft cockpit
Unsinkable No
Trailerable No
EC certification A
Standard public price ex. VAT (indicative only) About
315 000
(2017)
Xp 44's   Main dimensions
Hull length 43’ 7”
Waterline length 39’
Beam (width) 13’ 5”
Draft 7’ 6”
Light displacement 19070 lbs
Ballast weight 8488 lbs
Ballast type Cast iron fin with lead bulb
Xp 44's   Rig and sails
Upwind sail area 1150 sq.ft
Downwind sail area 2471 sq.ft
Mainsail area 642 sq.ft
Genoa area 508 sq.ft
Symetric spinnaker area 1830 sq.ft
Rigging type Sloop Marconi 9/10
Rotating spars No
Mast position Keel stepped mast
Spars Mast and boom in Aluminum (carbon boom as an option)
Standing rigging Single-strand (ROD)
Number of levels of spreaders 2
Spreaders angle Swept-back
Xp 44's   Performances
Upwind sail area to displacementiThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.
The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size. Upwind : under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 23 it indicates a fast sailboat.
25.35
Downwind sail area to displacementiThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.
The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size. Upwind : under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 23 it indicates a fast sailboat.
54.49
Displacement-Length ratio (DLR)iThe Displacement Length ratio is a figure that points out the boat's weight compared to its waterline length. DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet).
The DLR can be used to compare the relative mass of different sailboats no matter what their length: a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat.
146
Ballast ratioiThe Ballast ratio is an indicator of the stability; it is obtained by dividing the boat's displacement by the weight of the ballast. Since the stability depends also of the hull shape and the position of the center of gravity, only boats with similar ballast arrangements and hull shape should be considered.
Higher the ballast ratio is, greater is the stability.
45 %
Hull speediAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed".
The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34.
8.37 knots
Xp 44's   Auxiliary engine
Engine(s) 1
Engine type Inboard engine
Engine 40 HP
Fuel type Diesel
Fuel tank capacity 52.8 gal
Xp 44's   Accommodation
Cabin(s) 3
Berth(s) (min/max) 4 / 8
Head(s) 2
Fresh water tank capacity 92.5 gal
Maximum headroom 6’ 5”

Similar sailboats that might interest you :

Compare4 max.SailboatHull lengthFirst built hull
Salona 44 Standard44’ 4”2009
IMX 4545’ 1”2002
NYYC 4242’ 7”2006
Club Swan 4242’ 7”2006
Dehler 46 Standard45’ 10”2014
Italia 13.9845’ 11”2012
Grand Soleil 47 Cruising46’ 7”2012
Xp 50 Standard49’ 2”2012
Swan 4545’ 5”2001
X-4140’ 6”2006
X43 Standard41’2016
Grand Soleil 46 - B&C Standard46’ 2”2008
Xp 38 Standard38’2011
X-40 Standard40’2004
J/122e Standard40’2006
^