Detailed sailboat specifications and datasheets since 2015
MetricSI (m)
Imperial & Metricboth
ImperialIMP (ft)

Oyster 475 Standard

Sailboat specifications

The Oyster 475 is a 47’6” (14.48m) cruising sailboat designed by Holman & Pye (United Kingdom). She was built between 2012 and 2018 by Oyster (United Kingdom).

The Oyster 475 is as well listed, on Boat-Specs.com, in Shoal draft version (see all the versions compared).

Oyster 475's main features

Model
Oyster 475
Version
Standard
Hull type
Monohull
Category
Offshore cruising sailboat
Sailboat builder
Sailboat designer
Country
United Kingdom
Construction
Hull and deck: GRP (glass reinforced polyester)
First built hull
2012
Last built hull
2018
Appendages
Keel : L-shaped keel (with bulb)
Helm
Single helm wheel
Rudder
Single rudder on skeg
Unsinkable
No
Trailerable
No
EC design category
 iThe CE design category indicates the ability to cope with certain weather conditions (the sailboat is designed for these conditions)

A: Wind < force 9, Waves < 10m
B: Wind < force 8, Waves < 8m
C: Wind < force 6, Waves < 4m
D: Wind < force 4, Waves < 0,5m
A
Standard public price ex. VAT (indicative only)
About 
975 000
 (2016)

Oyster 475's main dimensions

Overall length
48’ 7”14.81 m
Hull length
47’ 6”14.48 m
Waterline length
40’ 7”12.36 m
Beam (width)
14’ 6”4.41 m
Draft
7’ 1”2.16 m
Mast height from DWL
62’ 5”19.03 m
Light displacement (MLC)
35274 lb16000 kg

Oyster 475's rig and sails

Upwind sail area
1293 ft²120.1 m²
Rigging type
Sloop Marconi masthead
Mast configuration
Keel stepped mast
Rotating spars
No
Number of levels of spreaders
3
Spreaders angle
Swept-back
Spars construction
Aluminum spars

Oyster 475's performances

Upwind sail area to displacement
 iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.

The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size.

Upwind: under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 25 it indicates a fast sailboat.
204 ft²/T18.91 m²/T
Displacement-length ratio (DLR)
 iThe Displacement Length Ratio (DLR) is a figure that points out the boat's weight compared to its waterline length. The DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet).
The DLR can be used to compare the relative mass of different sailboats no matter what their length:

a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat.
240
Righting moment @ 30°
 iThe righting moment is a moment (torque) that tends to restore a boat to its previous position after heeling. Its value corresponds to the torque needed to heel the boat for this angle.
Higher the righting moment is for an angle, greater is the stability.
73777 lb.ft10200 kg.m
Maximum righting moment
 iThe righting moment is a moment (torque) that tends to restore a boat to its previous position after heeling. Its value corresponds to the torque needed to heel the boat for this angle.
Higher the righting moment is for an angle, greater is the stability.
95476 lb.ft13200 kg.m @ 50.00 °
Critical hull speed
 iAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed".
The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34.
8.53 knots

Oyster 475's auxiliary engine

Engine(s)
1 inboard engine
Engine(s) power
75 HP
Fuel type
Diesel
Fuel tank capacity
198.1 gal750 liters

Oyster 475's accommodations and layout

Cockpit
Center cockpit
Cabin(s) (min./max.)
2 / 3
Berth(s) (min./max.)
4 / 8
Head(s)
2
Freshwater tank capacity
171.7 gal650 liters
Have you spotted incorrect data?  You can report it in the forum or contact the webmaster

Similar sailboats that may interest you:


Sailboats
First built hull
Hull length
Bavaria Cruiser 45 Standard (Bavaria Yachts)
2010
44’ 7”13.6 m
Bavaria Cruiser 46 Standard (Bavaria Yachts)
2014
44’ 7”13.6 m
Maramu (Amel)
1978
45’ 4”13.8 m
Oyster 475 Shoal draft (Oyster)
2012
47’ 6”14.48 m
Hallberg-Rassy 48 MkI (Hallberg-Rassy)
2004
49’ 2”14.99 m
Hallberg-Rassy 48 MkII Standard (Hallberg-Rassy)
2014
49’ 2”14.99 m
Super Maramu (Amel)
1988
52’ 6”16 m
Oyster 545 Standard (Oyster)
2013
52’ 11”16.12 m
Oyster 54 Standard (Oyster)
2013
52’ 11”16.12 m
Super Maramu 2000 (Amel)
2000
52’ 6”16 m
Amel 50 (Amel)
2017
50’ 11”15.51 m
Marlow Hunter 50 CC Deep draft (Marlow Hunter)
2009
47’ 10”14.58 m
Pilot Saloon 48 Standard (Wauquiez)
2016
48’ 6”14.77 m
Contest 50CS Standard (Conyplex)
2006
49’ 2”14.99 m
Hylas 48 (Hylas Yachts)
2018
48’14.63 m
Boat-Specs.com uses cookies to improve user experience. By using our website you consent to all cookies in accordance with our Cookie Policy.

Read more