Detailed sailboat specifications and datasheets since 2015
MetricSI (m)
Imperial & Metricboth
ImperialIMP (ft)

Elan E4 Shoal draft

Sailboat specifications

The Elan E4 is a 34’10” (10.6m) cruiser-racer sailboat designed by Humphreys Yacht Design (United Kingdom). She is built since 2016 by Elan Yachts (Slovenia). The Shoal draft version features a shorter keel to grant access to shallow areas. She has been awarded "2017 - SAIL magazine - Best Cruising Monohull Under 40ft".

The Elan E4 is as well listed, on Boat-Specs.com, in Standard and Deep draft version (see all the versions compared).

Elan E4's main features

Model
Elan E4
Version
Shoal draft
Hull type
Monohull
Category
Cruiser-racer sailboat
Sailboat builder
Sailboat designer
Sailboat range
Country
Slovenia
Construction
Hull and deck: GRP (glass reinforced polyester)
First built hull
2016
Last built hull
Still in production
Award(s)
  • 2017: SAIL magazine - Best Cruising Monohull Under 40ft
    Appendages
    Keel : T-shaped keel (with bulb)
    Helm
    Twin helm wheels
    Rudder
    Twin spade rudders
    Unsinkable
    No
    Trailerable
    No
    EC design category
     iThe CE design category indicates the ability to cope with certain weather conditions (the sailboat is designed for these conditions)

    A: Wind < force 9, Waves < 10m
    B: Wind < force 8, Waves < 8m
    C: Wind < force 6, Waves < 4m
    D: Wind < force 4, Waves < 0,5m
    A
    Standard public price ex. VAT (indicative only)
    About 
    150 000
     (2020)

    Elan E4's main dimensions

    Overall length
    34’ 10”10.6 m
    Hull length
    34’ 10”10.6 m
    Waterline length
    33’ 1”10.1 m
    Beam (width)
    11’ 6”3.5 m
    Draft
    5’ 7”1.7 m
    Mast height from DWL
    57’ 10”17.61 m
    Light displacement (MLC)
    12181 lb5525 kg
    Ballast weight
    3439 lb1560 kg

    Elan E4's rig and sails

    Upwind sail area
    706 ft²65.59 m²
    Downwind sail area
    1571 ft²145.91 m²
    Mainsail area
    387 ft²35.91 m²
    Jib area
    319 ft²29.68 m²
    Asymmetric spinnaker area
    1184 ft²110 m²
    I
     iFore triangle height (from mast foot to fore stay top attachment)
    45’ 2”13.77 m
    J
     iFore triangle base (from mast foot to bottom of forestay)
    13’ 2”4.03 m
    P
     iMainsail hoist measurement (from tack to head)
    44’ 4”13.49 m
    E
     iMainsail foot measurement (from tack to clew)
    15’ 2”4.63 m
    Rigging type
    Sloop Marconi 9/10
    Mast configuration
    Keel stepped mast
    Rotating spars
    No
    Number of levels of spreaders
    2
    Spreaders angle
    Swept-back
    Spars construction
    Aluminum spars (carbon fiber spars as an option)
    Standing rigging
    1x19 strand wire

    Elan E4's performances

    Upwind sail area to displacement
     iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.

    The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size.

    Upwind: under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 25 it indicates a fast sailboat.
    226 ft²/T20.99 m²/T
    Downwind sail area to displacement
     iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.

    The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size.
    503 ft²/T46.69 m²/T
    Displacement-length ratio (DLR)
     iThe Displacement Length Ratio (DLR) is a figure that points out the boat's weight compared to its waterline length. The DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet).
    The DLR can be used to compare the relative mass of different sailboats no matter what their length:

    a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat.
    152
    Ballast ratio
     iThe Ballast ratio is an indicator of stability; it is obtained by dividing the boat's displacement by the mass of the ballast. Since the stability depends also of the hull shapes and the position of the center of gravity, only the boats with similar ballast arrangements and hull shapes should be compared.

    The higher the ballast ratio is, the greater is the stability.
    28 %
    Critical hull speed
     iAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed".
    The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34.
    7.71 knots

    Elan E4's auxiliary engine

    Engine(s)
    1 inboard engine
    Engine(s) power
    30 HP
    Fuel type
    Diesel
    Fuel tank capacity
    19.8 gal75 liters

    Elan E4's accommodations and layout

    Cockpit
    Open aft cockpit
    Cabin(s) (min./max.)
    2 / 3
    Berth(s) (min./max.)
    4 / 8
    Head(s)
    1
    Freshwater tank capacity
    48.9 gal185 liters
    Have you spotted incorrect data?  You can report it in the forum or contact the webmaster

    Similar sailboats that may interest you:


    Sailboats
    First built hull
    Hull length
    J/121 (J/Boats)
    2017
    40’12.2 m
    Elan E3 Shoal draft (Elan Yachts)
    2016
    30’ 4”9.25 m
    Elan E5 Shoal draft (Elan Yachts)
    2015
    39’ 2”11.96 m
    Elan S4 Shoal draft (Elan Yachts)
    2016
    34’ 10”10.6 m
    Elan E4 Standard (Elan Yachts)
    2016
    34’ 10”10.6 m
    Arcona 340 Shoal draft (Arcona Yachts)
    2009
    34’ 1”10.4 m
    Arcona 380 Shoal draft (Arcona Yachts)
    2014
    37’11.28 m
    Elan 310 Standard (Elan Yachts)
    2009
    30’ 4”9.25 m
    Salona 35 Shoal draft (AD Boats)
    2013
    34’ 1”10.4 m
    Elan 350 Standard (Elan Yachts)
    2011
    34’ 10”10.6 m
    First 34.7 Shoal draft (Bénéteau)
    2005
    32’ 10”9.99 m
    J/109 Shoal draft (J/Boats)
    2001
    35’ 4”10.75 m
    Dufour 36 Performance (Dufour)
    2012
    36’ 1”10.99 m
    Italia 10.98 (Italia Yachts)
    2011
    36’10.98 m
    First 31.7 Shoal draft (Bénéteau)
    1997
    31’ 2”9.5 m
    Boat-Specs.com uses cookies to improve user experience. By using our website you consent to all cookies in accordance with our Cookie Policy.

    Read more