Boat-Specs.com

Sailboat specifications and datasheets

A35 R

The A35 R is a 34’8” monohull sailboat designed by Michel Joubert and Bernard Nivelt. She was built by BG Race (France) and made of sandwich fiberglass / polyester. The production started in 2014 .
BG Race A35 R BG Race A35 R sailplanBG Race A35 R layoutBG Race A35 R sailingBG Race A35 R accommodationsBG Race A35 R accommodations
A35 R's   Main Features
Model A35 R
Type of hull Monohull
Category Racer-cruiser sailboat
Shipyard
Designer Michel Joubert
Bernard Nivelt
Construction Hull:
sandwich fiberglass / polyester
Deck:
sandwich PVC / fiberglass / vinylester (composite infusion) post cured
First built hull 2014
Last built hull Still in production
Appendages Keel :
Fin without bulb
Helm 1 tiller (helm wheel in option)
Rudder 1 spade rudder (Double as option)
Cockpit Open aft cockpit
Unsinkable No
Trailerable No
EC certification A
Standard public price ex. VAT (indicative only) About
138 000
(2017)
A35 R's   Main dimensions
Length overall 36’ 4”
Hull length 34’ 8”
Waterline length 30’ 2”
Beam (width) 11’ 7”
Draft 7’ 2”
Light displacement 9811 lbs
Ballast weight 4630 lbs
Ballast type Lead
A35 R's   Rig and sails
Upwind sail area 727 sq.ft
Downwind sail area 1432 sq.ft
Mainsail area 409 sq.ft
Genoa area 318 sq.ft
Symetric spinnaker area 883 sq.ft
Asymetric spinnaker area 1023 sq.ft
Rigging type Sloop Marconi 9/10
Rotating spars No
Mast position Keel stepped mast
Spars Mast and boom in Carbon fiber
Number of levels of spreaders 2
Spreaders angle Swept-back
IiFore triangle height (from mast foot to fore stay attachment) 44’ 6”
JiFore triangle base (from mast foot to bottom of forestay) 13’ 6”
PiMainsail hoist measurement (from tack to head) 45’
EiMainsail foot measurement (from tack to clew) 15’ 8”
A35 R's   Performances
Upwind sail area to displacementiThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.
The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size. Upwind : under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 23 it indicates a fast sailboat.
24.95
Downwind sail area to displacementiThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.
The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size. Upwind : under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 23 it indicates a fast sailboat.
49.16
Displacement-Length ratio (DLR)iThe Displacement Length ratio is a figure that points out the boat's weight compared to its waterline length. DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet).
The DLR can be used to compare the relative mass of different sailboats no matter what their length: a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat.
161
Ballast ratioiThe Ballast ratio is an indicator of the stability; it is obtained by dividing the boat's displacement by the weight of the ballast. Since the stability depends also of the hull shape and the position of the center of gravity, only boats with similar ballast arrangements and hull shape should be considered.
Higher the ballast ratio is, greater is the stability.
47 %
Hull speediAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed".
The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34.
7.37 knots
A35 R's   Auxiliary engine
Engine(s) 1
Engine type Inboard engine
Engine 21 HP
Fuel type Diesel
Fuel tank capacity 7.9 gal
A35 R's   Accommodation
Cabin(s) (min/max) 2 / 3
Berth(s) (min/max) 4 / 7
Head(s) 1
Fresh water tank capacity 26.4 gal
Chart table 2’ 7” x 2’ 1”
Maximum headroom 6’ 1”
Galley headroom 6’
Head headroom 6’ 1”
A35 R's   Saloon
Maximum headroom 6’ 1”
Saloon table length 3’ 4”
Saloon table width (min/max) 1’ / 3’
Berth length 6’ 4”
Berth width (head/elbows/knees/feet) 1’ 11”
A35 R's   Fore cabin
Berth length 6’ 6”
Berth width (head/elbows/knees/feet) 5’ 7”
4’ 7”
3’ 5”
2’
A35 R's   Aft cabin
Maximum headroom 6’ 1”
Berth length 6’ 7”
Berth width (head/elbows/knees/feet) 4’ 8”
4’ 6”
4’ 1”
3’ 11”

Similar sailboats that might interest you :

Compare4 max.SailboatHull lengthFirst built hull
Elan S4 Standard34’ 10”2016
JPK 10.8035’ 5”2014
Sun Fast 3600 Standard35’ 5”2013
A3534’ 8”2006
JPK 1010 Fin keel32’ 10”2010
J/11136’ 5”2012
JPK 11035’ 10”2006
Xp 3332’ 10”2012
Sun Fast 320032’ 1”2007
Dehler 35SQ Standard34’ 6”2012
Elan S3 Deep draft30’ 4”2016
Elan E4 Standard34’ 10”2016
Elan 350 Standard34’ 10”2011
Xp 38 Standard38’2011
Italia 10.9836’2011
^