The **J/111** is a 36’5” (11.1m) racer-cruiser sailboat designed by *Alan Johnstone* (United States). She was built since 2012 (and now discontinued) by *J/Boats* (United States).

- Model
- J/111
- Hull type
- Monohull
- Category
- Racer-cruiser sailboat
- Sailboat builder
- Sailboat designer
- Country
- United States
- Construction
- GRP (glass reinforced polyester):

Sandwich balsa fiberglass vinylester (vacuum infusion) - First built hull
- 2012
- Last built hull
- Discontinued
- Appendages
- Keel : fin with bulb
- Helm
- Single helm wheel
- Rudder
- Single spade rudder
- Unsinkable
- No
- Trailerable
- No
- EC design category
*iThe CE design category indicates the ability to cope with certain weather conditions (the sailboat is designed for these conditions)*

A: Wind < force 9, Waves < 10m

B: Wind < force 8, Waves < 8m

C: Wind < force 6, Waves < 4m

D: Wind < force 4, Waves < 0,5m - A
- Standard public price ex. VAT (indicative only)
- About165 000 €(2020)

- Hull length
- 36’ 5”11.1 m
- Waterline length
- 32’ 8”9.97 m
- Beam (width)
- 10’ 10”3.29 m
- Draft
- 7’ 2”2.19 m
- Mast height from D
_{WL} - 55’ 2”16.84 m
- Light displacement (M
_{LC}) - 9295 lb4216 kg
- Ballast weight
- 3514 lb1594 kg
- Ballast type
- Cast iron fin with lead bulb

- Upwind sail area
- 753 ft²70 m²
- Downwind sail area
- 1798 ft²167 m²
- Mainsail area
- 398 ft²37 m²
- Genoa area
- 355 ft²33 m²
- Asymmetric spinnaker area
- 1399 ft²130 m²
- I
*iFore triangle height (from mast foot to fore stay top attachment)* - 48’ 5”14.74 m
- J
*iFore triangle base (from mast foot to bottom of forestay)* - 13’ 10”4.22 m
- P
*iMainsail hoist measurement (from tack to head)* - 45’ 2”13.77 m
- E
*iMainsail foot measurement (from tack to clew)* - 14’ 6”4.42 m
- Rigging type
- Sloop Marconi fractional
- Mast configuration
- Keel stepped mast
- Rotating spars
- No
- Number of levels of spreaders
- 2
- Spreaders angle
- Swept-back
- Spars construction
- Carbon fiber mast and aluminum boom
- Standing rigging
- Single-strand (ROD)

- Upwind sail area to displacement
*iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.*

The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size.

Upwind: under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 25 it indicates a fast sailboat. - 289 ft²/T26.82 m²/T
- Downwind sail area to displacement
*iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.*

The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size. - 689 ft²/T63.99 m²/T
- Displacement-length ratio (DLR)
*iThe Displacement Length Ratio (DLR) is a figure that points out the boat's weight compared to its waterline length. The DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet).*

The DLR can be used to compare the relative mass of different sailboats no matter what their length:

a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat. - 120
- Ballast ratio
*iThe Ballast ratio is an indicator of stability; it is obtained by dividing the boat's displacement by the mass of the ballast. Since the stability depends also of the hull shapes and the position of the center of gravity, only the boats with similar ballast arrangements and hull shapes should be compared.*

The higher the ballast ratio is, the greater is the stability. - 38 %
- Critical hull speed
*iAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed".*

The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34. - 7.66 knots

- Engine(s)
- 1 inboard engine
- Engine(s) power
- 21 HP
- Fuel type
- Diesel
- Fuel tank capacity
- 18.5 gal70 liters

- Cockpit
- Open aft cockpit
- Cabin(s)
- 1
- Berth(s) (min./max.)
- 6 / 8
- Head(s)
- 1
- Freshwater tank capacity
- 26.4 gal100 liters
- Holding tank capacity
- 11.9 gal45 liters
- Maximum headroom
- 5’ 11”1.8 m

Sailboats

First built hull

Hull length

2003

33’ 2”10.11 m

2015

36’ 1”10.99 m

2006

35’ 10”10.9 m

2017

32’9.75 m

2016

35’ 10”10.9 m

2017

40’12.2 m

2019

33’ 11”10.34 m

2019

32’ 7”9.94 m

2018

38’ 7”11.78 m

2010

32’ 10”10 m

1984

35’ 8”10.87 m

2006

34’ 8”10.59 m

2014

34’ 8”10.59 m

2014

35’ 5”10.8 m

2003

39’ 2”11.95 m