Detailed sailboat specifications and datasheets since 2015
MetricSI (m)
Imperial & Metricboth
ImperialIMP (ft)

Oyster 825 Standard

Sailboat specifications

The Oyster 825 is a 79’2” (24.14m) cruising sailboat designed by Humphreys Yacht Design (United Kingdom). She was built between 2014 and 2017 by Oyster (United Kingdom).

The Oyster 825 is as well listed, on Boat-Specs.com, in Shoal draft version (see all the versions compared).

Oyster 825's main features

Model
Oyster 825
Version
Standard
Hull type
Monohull
Category
Offshore cruising sailboat
Sailboat builder
Sailboat designer
Country
United Kingdom
Construction
Hull and deck: GRP (glass reinforced polyester)
First built hull
2014
Last built hull
2017
Appendages
Keel : L-shaped keel (with bulb)
Helm
Twin helm wheels
Rudder
Twin spade rudders
Unsinkable
No
Trailerable
No
EC design category
 iThe CE design category indicates the ability to cope with certain weather conditions (the sailboat is designed for these conditions)

A: Wind < force 9, Waves < 10m
B: Wind < force 8, Waves < 8m
C: Wind < force 6, Waves < 4m
D: Wind < force 4, Waves < 0,5m
A
Standard public price ex. VAT (indicative only)
About 
6 700 000
 (2016)

Oyster 825's main dimensions

Overall length
82’ 6”25.15 m
Hull length
79’ 2”24.14 m
Waterline length
72’ 1”21.97 m
Beam (width)
20’ 8”6.31 m
Draft
11’ 2”3.42 m
Mast height from DWL
112’ 1”34.16 m
Light displacement (MLC)
123459 lb56000 kg

Oyster 825's rig and sails

Upwind sail area
3439 ft²319.5 m²
Rigging type
Sloop Marconi 19/20
Mast configuration
Keel stepped mast
Rotating spars
No
Number of levels of spreaders
3
Spreaders angle
Swept-back
Spars construction
Aluminum spars

Oyster 825's performances

Upwind sail area to displacement
 iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.

The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size.

Upwind: under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 25 it indicates a fast sailboat.
235 ft²/T21.83 m²/T
Displacement-length ratio (DLR)
 iThe Displacement Length Ratio (DLR) is a figure that points out the boat's weight compared to its waterline length. The DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet).
The DLR can be used to compare the relative mass of different sailboats no matter what their length:

a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat.
150
Critical hull speed
 iAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed".
The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34.
11.38 knots

Oyster 825's auxiliary engine

Engine(s)
1 inboard engine
Engine(s) power
305 HP
Fuel type
Diesel
Fuel tank capacity
792.5 gal3000 liters

Oyster 825's accommodations and layout

Cockpit
Center cockpit
Cabin(s) (min./max.)
4 / 5
Berth(s) (min./max.)
8 / 10
Head(s) (min./max.)
4 / 5
Freshwater tank capacity
528.3 gal2000 liters
Have you spotted incorrect data?  You can report it in the forum or contact the webmaster

Similar sailboats that may interest you:


Sailboats
First built hull
Hull length
Super Maramu (Amel)
1988
52’ 6”16 m
Amel 64 (Amel)
2010
63’ 1”19.22 m
Jeanneau 64 Standard (Jeanneau)
2014
64’ 1”19.55 m
Oyster 825 Shoal draft (Oyster)
2014
79’ 2”24.14 m
X-73 (X-Yachts)
2001
72’21.95 m
Hanse 675 Standard (Hanse)
2015
67’ 4”20.5 m
Oyster 625 Standard (Oyster)
2011
62’ 5”19.03 m
Oyster 675 Standard (Oyster)
2014
65’ 4”19.89 m
Oyster 745 Standard (Oyster)
2014
71’ 8”21.86 m
Oyster 885 (Oyster)
2013
85’ 6”26.06 m
Amel 50 (Amel)
2017
50’ 11”15.51 m
Contest 67CS Standard (Conyplex)
2016
69’ 10”21.26 m
Contest 72CS Standard (Conyplex)
2012
71’ 6”21.8 m
Hylas 70 Deep draft (Hylas Yachts)
2007
68’ 11”21.01 m
Oyster 885 Series II (Oyster)
2018
85’ 6”26.06 m
Boat-Specs.com uses cookies to improve user experience. By using our website you consent to all cookies in accordance with our Cookie Policy.

Read more