The Marlow Hunter 47
is a 48’5” (14.76m) cruising catamaran designed by Hunter Design
(United States). She is built since 2016 by Marlow Hunter
(United States). The Furling mainsail
version is proposed with an in-mast furling system to ease the sailing.
The Marlow Hunter 47
is as well listed, on Boat-Specs.com, in Shoal draft
and Deep draft
version (see all the versions compared
Marlow Hunter 47's main features
Marlow Hunter 47
Offshore deck saloon cruising catamaran
Hull and deck: GRP (glass reinforced polyester)
First built hull
Last built hull
Still in production
Keel : wing keel
Single helm wheel
Single spade rudder
EC design category iThe CE design category indicates the ability to cope with certain weather conditions (the sailboat is designed for these conditions)
A: Wind < force 9, Waves < 10m
B: Wind < force 8, Waves < 8m
C: Wind < force 6, Waves < 4m
D: Wind < force 4, Waves < 0,5m
Standard public price ex. VAT (indicative only)
Marlow Hunter 47's main dimensions
50’ 6”15.39 m
48’ 5”14.76 m
44’ 8”13.61 m
5’ 6”1.68 m
Mast height from DWL
62’ 10”19.15 m
Light displacement (MLC)
35999 lb16329 kg
12500 lb5670 kg
Marlow Hunter 47's rig and sails
Upwind sail area
1065 ft²98.94 m²
Sloop Marconi (in-mast furling mainsail) fractional
Deck stepped mast
Number of levels of spreaders
1x19 strand wire
Marlow Hunter 47's performances
Upwind sail area to displacement iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.
The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size.
Upwind: under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 25 it indicates a fast sailboat.
165 ft²/T15.37 m²/T
Displacement-length ratio (DLR) iThe Displacement Length Ratio (DLR) is a figure that points out the boat's weight compared to its waterline length. The DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet).
The DLR can be used to compare the relative mass of different sailboats no matter what their length:
a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat.
Ballast ratio iThe Ballast ratio is an indicator of stability; it is obtained by dividing the boat's displacement by the mass of the ballast. Since the stability depends also of the hull shapes and the position of the center of gravity, only the boats with similar ballast arrangements and hull shapes should be compared.
The higher the ballast ratio is, the greater is the stability.
Critical hull speed iAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed".
The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34.
Marlow Hunter 47's auxiliary engine
1 inboard engine
Fuel tank capacity
150 gal568 liters
Marlow Hunter 47's accommodations and layout
Open aft cockpit
6 / 8
Freshwater tank capacity
193.9 gal734 liters
Holding tank capacity
52 gal197 liters
11.1 gal42 liters
6’ 10”2.06 m
Have you spotted incorrect data? You can report it in the forum
or contact the webmaster