The Catalina 22 MkII
is a 21’6” (6.55m) cruising sailboat designed by Frank Butler
(United States). She is built since 1995 by Catalina Yachts
(United States). The Wing keel
version is offered with a short keel fitted with large winglets. This configuration provides an interesting draft / low center of gravity / upwind performance trade-off.
The Catalina 22 MkII
is as well listed, on Boat-Specs.com, in Fin keel
and Swing keel
version (see all the versions compared
Catalina 22 MkII's main features
Catalina 22 MkII
Coastal cruising sailboat
Hull and deck: GRP (glass reinforced polyester)
First built hull
Last built hull
Still in production
Keel : wing keel
Single transom hung rudder
Standard public price ex. VAT (indicative only)
Catalina 22 MkII's main dimensions
23’ 10”7.26 m
21’ 6”6.55 m
19’ 4”5.89 m
8’ 4”2.54 m
2’ 6”0.76 m
Mast height from DWL
29’ 1”8.86 m
Light displacement (MLC)
2546 lb1155 kg
708 lb321 kg
Catalina 22 MkII's rig and sails
Upwind sail area
206 ft²19.14 m²
101 ft²9.38 m²
105 ft²9.76 m²
I iFore triangle height (from mast foot to fore stay top attachment)
25’ 10”7.87 m
J iFore triangle base (from mast foot to bottom of forestay)
P iMainsail hoist measurement (from tack to head)
E iMainsail foot measurement (from tack to clew)
9’ 8”2.95 m
Sloop Marconi masthead
Deck stepped mast
Number of levels of spreaders
1x19 strand wire continuous
Catalina 22 MkII's performances
D-PN rating iDPN is a variation of Portsmouth Yardstick used in the United States.
Upwind sail area to displacement iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.
The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size.
Upwind: under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 25 it indicates a fast sailboat.
187 ft²/T17.39 m²/T
Displacement-length ratio (DLR) iThe Displacement Length Ratio (DLR) is a figure that points out the boat's weight compared to its waterline length. The DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet).
The DLR can be used to compare the relative mass of different sailboats no matter what their length:
a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat.
Ballast ratio iThe Ballast ratio is an indicator of stability; it is obtained by dividing the boat's displacement by the mass of the ballast. Since the stability depends also of the hull shapes and the position of the center of gravity, only the boats with similar ballast arrangements and hull shapes should be compared.
The higher the ballast ratio is, the greater is the stability.
Critical hull speed iAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed".
The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34.
Catalina 22 MkII's auxiliary engine
1 outboard engine
Engine(s) power (min./max.)
5 HP / 7 HP
Fuel tank capacity
6.1 gal23 liters
Catalina 22 MkII's accommodations and layout
Closed aft cockpit
2 / 5
Freshwater tank capacity
4.5 gal17 liters
11.9 gal45 liters
4’ 4”1.32 m
Have you spotted incorrect data? You can report it in the forum
or contact the webmaster