Detailed sailboat specifications and datasheets since 2015
MetricSI (m)
Imperial & Metricboth
ImperialIMP (ft)

First 375 (Shoal draft) vs First 375 (Deep draft)

Main featuresFirst 375 Shoal draftFirst 375 Deep draft
Model
First 375
First 375
Version
Shoal draft
Deep draft
Hull type
Monohull
Monohull
Category
Cruising sailboat
Cruiser-racer sailboat
Sailboat builder
Bénéteau
Bénéteau
Sailboat designer
Sailboat range
Country
France
France
Construction
GRP (glass reinforced polyester):
- Hull: Single skin fiberglass polyester
- Deck: Sandwich balsa fiberglass polyester
GRP (glass reinforced polyester):
- Hull: Single skin fiberglass polyester
- Deck: Sandwich balsa fiberglass polyester
Number of hulls built
270
270
First built hull
1985
1985
Last built hull
1989
1989
Appendages
Keel : fin without bulb
Keel : fin without bulb
Helm
Single helm wheel
Single helm wheel
Rudder
Single spade rudder
Single spade rudder
Unsinkable
No
No
Trailerable
No
No
Former French navigation category
1
1
 
Main dimensionsFirst 375 Shoal draftFirst 375 Deep draft
Overall length
38’ 1”11.6 m
38’ 1”11.6 m
Hull length
37’11.27 m
37’11.27 m
Waterline length
33’ 1”10.1 m
33’ 1”10.1 m
Beam (width)
12’ 6”3.8 m
12’ 6”3.8 m
Draft
4’ 10”1.47 m
6’ 6”1.98 m
Light displacement (MLC)
15873 lb7200 kg
15432 lb7000 kg
Ballast weight
5732 lb2600 kg
5291 lb2400 kg
 
Rig and sailsFirst 375 Shoal draftFirst 375 Deep draft
Upwind sail area
817 ft²75.88 m²
817 ft²75.88 m²
Mainsail area
322 ft²29.91 m²
322 ft²29.91 m²
Genoa area
495 ft²45.97 m²
495 ft²45.97 m²
Rigging type
Sloop Marconi masthead
Sloop Marconi masthead
Mast configuration
Keel stepped mast
Keel stepped mast
Rotating spars
No
No
Number of levels of spreaders
2
2
Spreaders angle
0 °
0 °
Spars construction
Aluminum spars
Aluminum spars
Standing rigging
1x19 strand wire
1x19 strand wire
 
PerformancesFirst 375 Shoal draftFirst 375 Deep draft
Upwind sail area to displacement
 iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.

The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size.

Upwind: under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 25 it indicates a fast sailboat.
219 ft²/T20.35 m²/T
223 ft²/T20.74 m²/T
Displacement-length ratio (DLR)
 iThe Displacement Length Ratio (DLR) is a figure that points out the boat's weight compared to its waterline length. The DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet).
The DLR can be used to compare the relative mass of different sailboats no matter what their length:

a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat.
198
192
Ballast ratio
 iThe Ballast ratio is an indicator of stability; it is obtained by dividing the boat's displacement by the mass of the ballast. Since the stability depends also of the hull shapes and the position of the center of gravity, only the boats with similar ballast arrangements and hull shapes should be compared.

The higher the ballast ratio is, the greater is the stability.
36 %
34 %
Critical hull speed
 iAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed".
The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34.
7.71 knots
7.71 knots
 
Auxiliary engineFirst 375 Shoal draftFirst 375 Deep draft
Engine(s)
1 inboard engine
1 inboard engine
Engine(s) power (min./max.)
28 HP / 43 HP
28 HP / 43 HP
Fuel type
Diesel
Diesel
Fuel tank capacity
25.1 gal95 liters
25.1 gal95 liters
 
Accommodations and layoutFirst 375 Shoal draftFirst 375 Deep draft
Cockpit
Closed aft cockpit
Closed aft cockpit
Cabin(s) (min./max.)
2 / 3
2 / 3
Berth(s) (min./max.)
4 / 8
4 / 8
Head(s)
1
1
Freshwater tank capacity
105.7 gal400 liters
105.7 gal400 liters
 
Boat-Specs.com uses cookies to improve user experience. By using our website you consent to all cookies in accordance with our Cookie Policy.

Read more