Detailed sailboat specifications and datasheets since 2015
MetricSI (m)
Imperial & Metricboth
ImperialIMP (ft)

Hobie Cat FX One (Classic) vs Hobie Cat FX One (Extreme)

Main featuresHobie Cat FX One ClassicHobie Cat FX One Extreme
Model
Hobie Cat FX One
Hobie Cat FX One
Version
Classic
Extreme
Hull type
Catamaran
Catamaran
Category
Single handed sport/beach catamaran
Single handed sport/beach catamaran
Sailboat builder
Hobie Cat
Hobie Cat
Sailboat designer
Country
United States
United States
Construction
GRP (glass reinforced polyester):
Sandwich foam fiberglass polyester
GRP (glass reinforced polyester):
Sandwich foam fiberglass polyester
First built hull
2002
2002
Last built hull
Discontinued
Discontinued
Appendages
Centerboard : twin daggerboards
Centerboard : twin daggerboards
Helm
Single tiller
Single tiller
Rudder
Twin transom hung rudders
Twin transom hung rudders
Unsinkable
No
No
Trailerable
Yes
Yes
EC design category
 iThe CE design category indicates the ability to cope with certain weather conditions (the sailboat is designed for these conditions)

A: Wind < force 9, Waves < 10m
B: Wind < force 8, Waves < 8m
C: Wind < force 6, Waves < 4m
D: Wind < force 4, Waves < 0,5m
C
C
 
Main dimensionsHobie Cat FX One ClassicHobie Cat FX One Extreme
Hull length
17’ 2”5.25 m
17’ 2”5.25 m
Waterline length
17’ 2”5.25 m
17’ 2”5.25 m
Beam (width)
8’ 5”2.55 m
8’ 5”2.55 m
Draft
3’ 8”1.14 m
3’ 8”1.14 m
Draft when appendages up
0’ 6”0.15 m
0’ 6”0.15 m
Light displacement (MLC)
309 lb140 kg
309 lb140 kg
 
Rig and sailsHobie Cat FX One ClassicHobie Cat FX One Extreme
Upwind sail area
172 ft²16 m²
217 ft²20.15 m²
Downwind sail area
360 ft²33.42 m²
360 ft²33.42 m²
Mainsail area
172 ft²16 m²
172 ft²16 m²
Jib area
45 ft²4.15 m²
Asymmetric spinnaker area
188 ft²17.42 m²
188 ft²17.42 m²
P
 iMainsail hoist measurement (from tack to head)
26’ 7”8.1 m
26’ 7”8.1 m
Rigging type
Cat boat Marconi
Sloop Marconi fractional
Mast configuration
Fore beam stepped mast
Fore beam stepped mast
Rotating spars
Yes
Yes
Spreaders angle
No spreader
No spreader
Spars construction
Aluminum spars
Aluminum spars
Standing rigging
1x19 strand wire
1x19 strand wire
 
PerformancesHobie Cat FX One ClassicHobie Cat FX One Extreme
Crew
1 / 2
1 / 2
Trapezes
1 set(s)
1 set(s)
Upwind sail area to displacement
 iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.

The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size.

Upwind: under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 25 it indicates a fast sailboat.
639 ft²/T59.34 m²/T
804 ft²/T74.73 m²/T
Downwind sail area to displacement
 iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.

The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size.
1334 ft²/T123.95 m²/T
1334 ft²/T123.95 m²/T
Displacement-length ratio (DLR)
 iThe Displacement Length Ratio (DLR) is a figure that points out the boat's weight compared to its waterline length. The DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet).
The DLR can be used to compare the relative mass of different sailboats no matter what their length:

a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat.
27
27
 
Auxiliary engineHobie Cat FX One ClassicHobie Cat FX One Extreme
Engine(s)
No engine
No engine
 
Accommodations and layoutHobie Cat FX One ClassicHobie Cat FX One Extreme
Cockpit
No cockpit
No cockpit
 
Boat-Specs.com uses cookies to improve user experience. By using our website you consent to all cookies in accordance with our Cookie Policy.

Read more