Boat-Specs.com

Sailboat specifications and datasheets

J/122e standard

The J/122e, here in "standard" version, is a 40’ monohull sailboat designed by Rod Johnstone. She was built by J/Boats (United States) and made of sandwich fiberglass / polyester (composite infusion). The production started in 2006 .

The J/122e is as well listed, on Boat-Specs.com, in version Shoal draft.

J/Boats J/122e J/Boats J/122e layoutJ/Boats J/122e layoutJ/Boats J/122e layoutJ/Boats J/122e sailingJ/Boats J/122e sailingJ/Boats J/122e sailingJ/Boats J/122e sailingJ/Boats J/122e cockpitJ/Boats J/122e accommodationsJ/Boats J/122e accommodations
J/122e's   Main Features
Model J/122e
Version Standard
Type of hull Monohull
Category Offshore racer-cruiser sailboat
Shipyard
Designer Rod Johnstone
Construction Hull and deck:
sandwich fiberglass / polyester (composite infusion)
First built hull 2006
Last built hull Still in production
Appendages Keel :
Fin with bulb
Helm 1 wheel
Rudder 1 spade rudder
Cockpit Open aft cockpit
Unsinkable No
Trailerable No
EC certification A
Standard public price ex. VAT (indicative only) About
272 000
(2017)
J/122e's   Main dimensions
Hull length 40’
Waterline length 34’ 7”
Beam (width) 11’ 11”
Draft 7’ 2”
Light displacement 14903 lbs
Ballast weight 5842 lbs
Ballast type Cast iron fin with lead bulb
J/122e's   Rig and sails
Upwind sail area 969 sq.ft
Downwind sail area 2153 sq.ft
Mainsail area 538 sq.ft
Genoa area 431 sq.ft
Solent area 301 sq.ft
Stormjib area 65 sq.ft
Symetric spinnaker area 1615 sq.ft
Rigging type Sloop Marconi fractional
Rotating spars No
Mast position Keel stepped mast
Spars Mast in Carbon fiber and boom in Aluminum
Standing rigging Single-strand (ROD)
Number of levels of spreaders 2
Spreaders angle Swept-back
IiFore triangle height (from mast foot to fore stay attachment) 54’ 5”
JiFore triangle base (from mast foot to bottom of forestay) 15’ 2”
PiMainsail hoist measurement (from tack to head) 51’ 4”
EiMainsail foot measurement (from tack to clew) 17’ 7”
J/122e's   Performances
Upwind sail area to displacementiThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.
The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size. Upwind : under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 23 it indicates a fast sailboat.
25.17
Downwind sail area to displacementiThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.
The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size. Upwind : under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 23 it indicates a fast sailboat.
55.94
Displacement-Length ratio (DLR)iThe Displacement Length ratio is a figure that points out the boat's weight compared to its waterline length. DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet).
The DLR can be used to compare the relative mass of different sailboats no matter what their length: a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat.
163
Ballast ratioiThe Ballast ratio is an indicator of the stability; it is obtained by dividing the boat's displacement by the weight of the ballast. Since the stability depends also of the hull shape and the position of the center of gravity, only boats with similar ballast arrangements and hull shape should be considered.
Higher the ballast ratio is, greater is the stability.
39 %
Hull speediAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed".
The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34.
7.88 knots
J/122e's   Auxiliary engine
Engine(s) 1
Engine type Inboard engine
Engine (min/max) 30 HP / 40 HP
Fuel type Diesel
Fuel tank capacity 26.4 gal
J/122e's   Accommodation
Cabin(s) (min/max) 2 / 3
Berth(s) (min/max) 6 / 8
Head(s) (min/max) 1 / 2
Fresh water tank capacity 42.3 gal
Water heater capacity 5 gal
Maximum headroom 6’ 2”
J/122e's   Saloon
Maximum headroom 6’ 4”
Berth length 6’ 7”
Berth width 2’ 2”
J/122e's   Fore cabin
Maximum headroom 6’ 2”
Berth length 6’ 7”
Berth width 5’
J/122e's   Aft cabin
Maximum headroom 6’ 2”
Berth length 6’ 7”
Berth width 4’ 6”

Similar sailboats that might interest you :

Compare4 max.SailboatHull lengthFirst built hull
A40 RC39’ 2”2003
X-4140’ 6”2006
Elan S5 Deep draft39’ 2”2015
X-40 Standard40’2004
IMX 4039’ 8”2000
Club Swan 4242’ 7”2006
NYYC 4242’ 7”2006
J/11136’ 5”2012
Xp 38 Standard38’2011
JPK 11035’ 10”2006
Salona 41 Deep draft41’2010
Sun Fast 3600 Standard35’ 5”2013
JPK 10.8035’ 5”2014
Elan 410 Standard40’ 4”2007
Hallberg-Rassy 4040’ 8”2002
^