Detailed sailboat specifications and datasheets since 2015
MetricSI (m)
Imperial & Metricboth
ImperialIMP (ft)

Elan 380 Standard

Sailboat specifications

The Elan 380 is a 37’2” (11.34m) cruiser-racer sailboat designed by Humphreys Yacht Design (United Kingdom). She was built between 2008 and 2012 by Elan Yachts (Slovenia).

The Elan 380 is as well listed, on Boat-Specs.com, in Deep draft version (see all the versions compared).

Elan 380's main features

Model
Elan 380
Version
Standard
Hull type
Monohull
Category
Offshore cruiser-racer sailboat
Sailboat builder
Sailboat designer
Country
Slovenia
Construction
Hull and deck: GRP (glass reinforced polyester)
First built hull
2008
Last built hull
2012
Appendages
Keel : L-shaped keel (with bulb)
Helm
Single helm wheel
Rudder
Single spade rudder
Unsinkable
No
Trailerable
No
EC design category
 iThe CE design category indicates the ability to cope with certain weather conditions (the sailboat is designed for these conditions)

A: Wind < force 9, Waves < 10m
B: Wind < force 8, Waves < 8m
C: Wind < force 6, Waves < 4m
D: Wind < force 4, Waves < 0,5m
A
Standard public price ex. VAT (indicative only)
N/A

Elan 380's main dimensions

Overall length
37’ 2”11.34 m
Hull length
37’ 2”11.34 m
Waterline length
34’ 11”10.63 m
Beam (width)
12’3.65 m
Draft
6’ 8”2.05 m
Light displacement (MLC)
15763 lb7150 kg
Ballast weight
5205 lb2361 kg

Elan 380's rig and sails

Upwind sail area
807 ft²74.99 m²
Downwind sail area
1695 ft²157.43 m²
Mainsail area
449 ft²41.67 m²
Jib area
359 ft²33.32 m²
Symmetric spinnaker area
1246 ft²115.76 m²
Gennaker area
1217 ft²113.08 m²
I
 iFore triangle height (from mast foot to fore stay top attachment)
49’ 1”14.98 m
J
 iFore triangle base (from mast foot to bottom of forestay)
13’ 7”4.16 m
P
 iMainsail hoist measurement (from tack to head)
47’ 11”14.61 m
E
 iMainsail foot measurement (from tack to clew)
16’ 4”4.96 m
Rigging type
Sloop Marconi fractional
Mast configuration
Keel stepped mast
Rotating spars
No
Number of levels of spreaders
2
Spreaders angle
Swept-back
Spars construction
Aluminum spars (carbon fiber spars as an option)

Elan 380's performances

Upwind sail area to displacement
 iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.

The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size.

Upwind: under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 25 it indicates a fast sailboat.
218 ft²/T20.21 m²/T
Downwind sail area to displacement
 iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.

The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size.
457 ft²/T42.42 m²/T
Displacement-length ratio (DLR)
 iThe Displacement Length Ratio (DLR) is a figure that points out the boat's weight compared to its waterline length. The DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet).
The DLR can be used to compare the relative mass of different sailboats no matter what their length:

a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat.
169
Ballast ratio
 iThe Ballast ratio is an indicator of stability; it is obtained by dividing the boat's displacement by the mass of the ballast. Since the stability depends also of the hull shapes and the position of the center of gravity, only the boats with similar ballast arrangements and hull shapes should be compared.

The higher the ballast ratio is, the greater is the stability.
33 %
Righting moment @ 30°
 iThe righting moment is a moment (torque) that tends to restore a boat to its previous position after heeling. Its value corresponds to the torque needed to heel the boat for this angle.
Higher the righting moment is for an angle, greater is the stability.
25316 lb.ft3500 kg.m
Maximum righting moment
 iThe righting moment is a moment (torque) that tends to restore a boat to its previous position after heeling. Its value corresponds to the torque needed to heel the boat for this angle.
Higher the righting moment is for an angle, greater is the stability.
34718 lb.ft4800 kg.m @ 55.00 °
Critical hull speed
 iAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed".
The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34.
7.91 knots

Elan 380's auxiliary engine

Engine(s)
1 inboard engine
Engine(s) power
30 HP
Fuel type
Diesel
Fuel tank capacity
29.1 gal110 liters

Elan 380's accommodations and layout

Cockpit
Open aft cockpit
Cabin(s) (min./max.)
2 / 3
Berth(s) (min./max.)
4 / 8
Head(s)
1
Freshwater tank capacity
66 gal250 liters
Have you spotted incorrect data?  You can report it in the forum or contact the webmaster

Similar sailboats that may interest you:


Sailboats
First built hull
Hull length
Dehler 34 - J&V Standard (Dehler)
2016
33’ 10”10.3 m
J/121 (J/Boats)
2017
40’12.2 m
Elan E4 Standard (Elan Yachts)
2016
34’ 10”10.6 m
Arcona 340 Standard (Arcona Yachts)
2009
34’ 1”10.4 m
Arcona 380 Standard (Arcona Yachts)
2014
37’11.28 m
Arcona 410 Standard (Arcona Yachts)
2011
40’12.2 m
Elan 340 Standard (Elan Yachts)
2006
32’ 10”9.99 m
Elan 350 Standard (Elan Yachts)
2011
34’ 10”10.6 m
J/109 Standard (J/Boats)
2001
35’ 4”10.75 m
Dehler 38 Standard (Dehler)
2012
37’ 1”11.3 m
Elan 380 Deep draft (Elan Yachts)
2008
37’ 2”11.34 m
X-37 Standard (X-Yachts)
2004
37’ 2”11.35 m
Salona 38 Medium draft (AD Boats)
2011
37’ 8”11.5 m
Grand Soleil 40 - B&C Standard (Cantiere Del Pardo)
2006
36’ 6”11.12 m
Elan 410 Standard (Elan Yachts)
2007
40’ 4”12.27 m
Boat-Specs.com uses cookies to improve user experience. By using our website you consent to all cookies in accordance with our Cookie Policy.

Read more