Boat-Specs.com

Sailboat specifications and datasheets

Bavaria Cruiser 36 shoal draft

The Bavaria Cruiser 36, here in "shoal draft" version, is a 35’10” monohull sailboat designed by Bruce Farr. She was built by Bavaria Yachtbau (Germany) and made of GRP (glass reinforced polyester). The production started in 2010 .

The Bavaria Cruiser 36 is as well listed, on Boat-Specs.com, in version Standard.

Bavaria Yachtbau Bavaria Cruiser 36 Bavaria Yachtbau Bavaria Cruiser 36 sailplanBavaria Yachtbau Bavaria Cruiser 36 layoutBavaria Yachtbau Bavaria Cruiser 36 layoutBavaria Yachtbau Bavaria Cruiser 36 sailingBavaria Yachtbau Bavaria Cruiser 36 sailingBavaria Yachtbau Bavaria Cruiser 36 accommodationsBavaria Yachtbau Bavaria Cruiser 36 accommodations
Bavaria Cruiser 36's   Main Features
Model Bavaria Cruiser 36
Version Shoal draft
Type of hull Monohull
Category Cruising sailboat
Shipyard
Designer Bruce Farr
Construction GRP (glass reinforced polyester)
First built hull 2010
Last built hull Discontinued
Appendages Keel :
Fin with bulb
Helm 1 wheel
Rudder 1 spade rudder
Cockpit Open aft cockpit with closing system
Unsinkable No
Trailerable No
EC certification A
Standard public price ex. VAT (indicative only) N/A
Bavaria Cruiser 36's   Main dimensions
Length overall 37’ 1”
Hull length 35’ 10”
Waterline length 32’ 6”
Beam (width) 12’
Draft 5’ 4”
Mast height from DWL 50’ 2”
Light displacement 15432 lbs
Ballast weight 4586 lbs
French customs tonnage 13.18 Tx
Bavaria Cruiser 36's   Rig and sails
Upwind sail area 732 sq.ft
Downwind sail area 1324 sq.ft
Mainsail area 441 sq.ft
Solent area 291 sq.ft
Gennaker area 883 sq.ft
Rigging type Sloop Marconi 9/10
Rotating spars No
Mast position Deck stepped mast
Spars Mast and boom in Aluminum
Number of levels of spreaders 2
Spreaders angle Swept-back
IiFore triangle height (from mast foot to fore stay attachment) 46’ 4”
JiFore triangle base (from mast foot to bottom of forestay) 12’ 2”
PiMainsail hoist measurement (from tack to head) 44’ 8”
EiMainsail foot measurement (from tack to clew) 16’ 8”
Bavaria Cruiser 36's   Performances
Upwind sail area to displacementiThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.
The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size. Upwind : under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 23 it indicates a fast sailboat.
18.58
Downwind sail area to displacementiThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.
The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size. Upwind : under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 23 it indicates a fast sailboat.
33.61
Displacement-Length ratio (DLR)iThe Displacement Length ratio is a figure that points out the boat's weight compared to its waterline length. DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet).
The DLR can be used to compare the relative mass of different sailboats no matter what their length: a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat.
204
Ballast ratioiThe Ballast ratio is an indicator of the stability; it is obtained by dividing the boat's displacement by the weight of the ballast. Since the stability depends also of the hull shape and the position of the center of gravity, only boats with similar ballast arrangements and hull shape should be considered.
Higher the ballast ratio is, greater is the stability.
30 %
Hull speediAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed".
The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34.
7.64 knots
Bavaria Cruiser 36's   Auxiliary engine
Engine(s) 1
Engine type Inboard engine
Engine (min/max) 18 HP
Fuel type Diesel
Fuel tank capacity 39.6 gal
Bavaria Cruiser 36's   Accommodation
Cabin(s) (min/max) 2 / 3
Berth(s) (min/max) 4 / 8
Head(s) 1
Fresh water tank capacity 55.5 gal
Maximum headroom 6’ 2”

Similar sailboats that might interest you :

Compare4 max.SailboatHull lengthFirst built hull
Hanse 385 Shoal draft35’ 10”2011
Grand Soleil 40 - B&C Deep draft36’ 6”2006
Hallberg-Rassy 372 Shoal draft37’ 2”2010
Grand Soleil 37 - B&C Shoal draft37’ 1”2005
X-34 Shoal draft34’2007
X-37 Sport37’ 2”2004
X-37 Shoal draft37’ 2”2004
Hallberg-Rassy 37 Shoal draft37’ 1”2003
Bavaria 40 Cruiser - Farr Shoal draft39’ 4”2010
J/109 Shoal draft35’ 4”2001
Bavaria Cruiser 32 Shoal draft32’2010
Grand Soleil 39 - 2011 Standard38’ 10”2011
Catalina 375 Wing keel37’ 4”2008
Hunter 36 - 2011 Deep draft34’ 7”2011
Catalina 350 MkII Wing keel35’ 2”2007
^