The Bavaria Cruiser 37
is a 35’10” (10.9m) cruising sailboat designed by Farr Yacht Design
(United States). She is built since 2014 by Bavaria Yachts
(Germany). The Shoal draft
version features a shorter keel to grant access to shallow areas.
The Bavaria Cruiser 37
is as well listed, on Boat-Specs.com, in Standard
version (see all the versions compared
Bavaria Cruiser 37's main features
Bavaria Cruiser 37
Hull and deck: GRP (glass reinforced polyester)
First built hull
Last built hull
Still in production
Keel : L-shaped keel (with bulb)
Twin helm wheels
Single spade rudder
EC design category iThe CE design category indicates the ability to cope with certain weather conditions (the sailboat is designed for these conditions)
A: Wind < force 9, Waves < 10m
B: Wind < force 8, Waves < 8m
C: Wind < force 6, Waves < 4m
D: Wind < force 4, Waves < 0,5m
Standard public price ex. VAT (indicative only)
Bavaria Cruiser 37's main dimensions
37’ 1”11.3 m
35’ 10”10.9 m
33’ 6”10.22 m
5’ 4”1.63 m
Mast height from DWL
55’ 2”16.82 m
Light displacement (MLC)
15432 lb7000 kg
4586 lb2080 kg
Bavaria Cruiser 37's rig and sails
Upwind sail area
743 ft²69 m²
441 ft²41 m²
301 ft²28 m²
I iFore triangle height (from mast foot to fore stay top attachment)
43’ 1”13.15 m
J iFore triangle base (from mast foot to bottom of forestay)
12’ 1”3.7 m
P iMainsail hoist measurement (from tack to head)
44’ 7”13.6 m
E iMainsail foot measurement (from tack to clew)
16’ 8”5.1 m
Sloop Marconi 9/10
Deck stepped mast
Number of levels of spreaders
1x19 strand wire
Bavaria Cruiser 37's performances
Upwind sail area to displacement iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.
The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size.
Upwind: under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 25 it indicates a fast sailboat.
203 ft²/T18.86 m²/T
Displacement-length ratio (DLR) iThe Displacement Length Ratio (DLR) is a figure that points out the boat's weight compared to its waterline length. The DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet).
The DLR can be used to compare the relative mass of different sailboats no matter what their length:
a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat.
Ballast ratio iThe Ballast ratio is an indicator of stability; it is obtained by dividing the boat's displacement by the mass of the ballast. Since the stability depends also of the hull shapes and the position of the center of gravity, only the boats with similar ballast arrangements and hull shapes should be compared.
The higher the ballast ratio is, the greater is the stability.
Critical hull speed iAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed".
The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34.
Bavaria Cruiser 37's auxiliary engine
1 inboard engine
Fuel tank capacity
39.6 gal150 liters
Bavaria Cruiser 37's accommodations and layout
Closing aft cockpit with opening system
2 / 3
4 / 8
Freshwater tank capacity
55.5 gal210 liters
Bavaria Cruiser 37's saloon
6’ 5”1.95 m
Have you spotted incorrect data? You can report it in the forum
or contact the webmaster