Sailboat specifications and datasheets

Oyster 54 standard

The Oyster 54, here in "standard" version, is a 52’11” monohull sailboat designed by Rob Humphreys. She was built by Oyster (United Kingdom) and made of GRP (glass reinforced polyester). The production started in 2013 .

The Oyster 54 has also been marketed as Oyster 545 and is as well listed, on, in version Shoal draft and Keel and centerboard.

Oyster 54 Oyster 54 sailplanOyster 54 sailplanOyster 54 layoutOyster 54 layoutOyster 54 sailingOyster 54 sailingOyster 54 sailingOyster 54 accommodationsOyster 54 accommodationsOyster 54 accommodationsOyster 54 accommodationsOyster 54 accommodationsOyster 54 accommodationsOyster 54 accommodations
Oyster 54's   Main Features
Model Oyster 54
Version Standard
Type of hull Monohull
Category Offshore deck saloon cruising sailboat
Designer Rob Humphreys
Construction GRP (glass reinforced polyester)
First built hull 2013
Last built hull Still in production
Appendages Keel :
L-shaped keel (with bulb)
Helm 1 wheel
Rudder 1 semi-spade rudder
Cockpit Central cockpit
Unsinkable No
Trailerable No
EC certification A
Standard public price ex. VAT (indicative only) About
1 300 000
Oyster 54's   Main dimensions
Length overall 53’ 11”
Hull length 52’ 11”
Waterline length 46’ 4”
Beam (width) 15’ 7”
Draft 7’ 11”
Mast height from DWL 70’ 6”
Light displacement 46992 lbs
Oyster 54's   Rig and sails
Upwind sail area 1659 sq.ft
Rigging type Sloop Marconi masthead
Rotating spars No
Mast position Keel stepped mast
Spars Mast and boom in Aluminum
Number of levels of spreaders 2
Spreaders angle Swept-back
Oyster 54's   Performances
Upwind sail area to displacementiThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.
The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size. Upwind : under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 23 it indicates a fast sailboat.
Displacement-Length ratio (DLR)iThe Displacement Length ratio is a figure that points out the boat's weight compared to its waterline length. DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet).
The DLR can be used to compare the relative mass of different sailboats no matter what their length: a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat.
Hull speediAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed".
The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34.
9.11 knots
Oyster 54's   Auxiliary engine
Engine(s) 1
Engine type Inboard engine
Engine 110 HP
Fuel type Diesel
Fuel tank capacity 224.5 gal
Oyster 54's   Accommodation
Cabin(s) 3
Berth(s) (min/max) 6 / 8
Head(s) 2
Fresh water tank capacity 198.1 gal

Similar sailboats that might interest you :

Compare4 max.SailboatHull lengthFirst built hull
Oyster 54 Standard52’ 11”2013
Southerly 53554’ 7”2014
Southerly 54054’ 7”2017
Amel 5453’ 10”2005
Amel 5554’ 11”2012
Hallberg-Rassy 5554’ 8”2012
Super Maramu 200052’ 6”2000
Amel 5050’ 11”2017
Jeanneau 54 Standard51’ 8”2015
Hanse 548 Standard51’ 8”2017
Hanse 545 Standard52’ 10”2009
Oyster 575 Standard57’ 6”2010
Bavaria Cruiser 55 Standard53’2010
Bavaria Cruiser 56 Standard53’2014
Océanis 55 Deep draft52’ 6”2012