Boat-Specs.com

Sailboat specifications and datasheets

X-372 mast head rigging

The X-372, here in "mast head rigging" version, is a 36’4” monohull sailboat designed by Niels Jeppesen. She was built by X-Yachts (Denmark) and made of sandwich fiberglass / polyester with galvanised steel frame. This sailboat was produced between 1987 and 1992 with 120 hulls completed.

The X-372 is as well listed, on Boat-Specs.com, in version Fractionnal rigging.

X-Yachts X-372 X-Yachts X-372 sailplanX-Yachts X-372 layoutX-Yachts X-372 layoutX-Yachts X-372 sailingX-Yachts X-372 accommodationsX-Yachts X-372 accommodations
X-372's   Main Features
Model X-372
Version Mast head rigging
Type of hull Monohull
Category Cruiser-racer sailboat
Shipyard
Designer Niels Jeppesen
Construction Hull and deck:
sandwich fiberglass / polyester with galvanised steel frame
First built hull 1987
Last built hull 1992
Number of hulls built 120
Appendages Keel :
Fin without bulb
Helm 1 tiller (helm wheel in option)
Rudder 1 spade rudder
Cockpit Open aft cockpit
Unsinkable No
Trailerable No
Standard public price ex. VAT (indicative only) N/A
X-372's   Main dimensions
Length overall 37’ 8”
Hull length 36’ 4”
Waterline length 29’ 6”
Beam (width) 11’ 8”
Draft 6’ 7”
Light displacement 11244 lbs
Ballast weight 4850 lbs
Ballast type Cast iron / lead fin
X-372's   Rig and sails
Upwind sail area 818 sq.ft
Downwind sail area 1419 sq.ft
Mainsail area 304 sq.ft
Genoa area 515 sq.ft
Solent area 343 sq.ft
Stormjib area 108 sq.ft
Symetric spinnaker area 1115 sq.ft
Rigging type Sloop Marconi masthead
Rotating spars No
Mast position Keel stepped mast
Spars Mast and boom in Aluminum
Number of levels of spreaders 2
Spreaders angle 0 °
X-372's   Performances
Upwind sail area to displacementiThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.
The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size. Upwind : under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 23 it indicates a fast sailboat.
25.65
Downwind sail area to displacementiThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.
The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size. Upwind : under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 23 it indicates a fast sailboat.
44.48
Displacement-Length ratio (DLR)iThe Displacement Length ratio is a figure that points out the boat's weight compared to its waterline length. DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet).
The DLR can be used to compare the relative mass of different sailboats no matter what their length: a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat.
198
Ballast ratioiThe Ballast ratio is an indicator of the stability; it is obtained by dividing the boat's displacement by the weight of the ballast. Since the stability depends also of the hull shape and the position of the center of gravity, only boats with similar ballast arrangements and hull shape should be considered.
Higher the ballast ratio is, greater is the stability.
43 %
Hull speediAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed".
The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34.
7.28 knots
X-372's   Auxiliary engine
Engine(s) 1
Engine type Inboard engine
Engine 28 HP
Fuel type Diesel
X-372's   Accommodation
Cabin(s) 2
Berth(s) (min/max) 4 / 6
Head(s) 1
Maximum headroom 6’ 2”

Similar sailboats that might interest you :

Compare4 max.SailboatHull lengthFirst built hull
X-342 Mast head rigging33’ 6”1988
Catalina 36 MkI Tall rig36’ 4”1982
Sealord 39 Ketch38’ 6”1983
Catalina 34 MkI Tall rig34’ 6”1985
Catalina 36 MkII Tall rig36’ 4”1994
Evasion 34 Ketch33’ 11”1980
Catalina 380 Tall rig38’ 6”1987
Catalina 34 MkII Tall rig34’ 6”1996
Sun Légende 41 Regatta40’ 2”1985
Feeling 1090 Shoal draft35’ 6”1986
Hallberg-Rassy 35 Rasmus Ketch34’ 5”1967
Catalina 390 Tall rig38’ 8”2001
Elite 37 Keel and centerboard35’ 11”1982
Feeling 1100 Keel and centerboard35’ 11”1982
First 36s7 Regatta34’ 5”1995
^