Boat-Specs.com

Sailboat specifications and datasheets

X-35

The X-35 is a 34’10” multiple crew monohull sailboat designed by Niels Jeppesen. She was built by X-Yachts (Denmark) and made of sandwich fiberglass / polyester with galvanised steel frame. The production started in 2005 .

The X-35 belongs to the Xr range and the ISAF class.

X-Yachts X-35 X-Yachts X-35 sailplanX-Yachts X-35 layoutX-Yachts X-35 layoutX-Yachts X-35 sailingX-Yachts X-35 sailingX-Yachts X-35 sailingX-Yachts X-35 accommodationsX-Yachts X-35 accommodationsX-Yachts X-35 detail
X-35's   Main Features
Model X-35
Type of hull Monohull
Shipyard
Designer Niels Jeppesen
Range Xr
Class ISAF
Construction Hull and deck:
sandwich fiberglass / polyester with galvanised steel frame
First built hull 2005
Last built hull Discontinued
Appendages Keel :
Fin with bulb
Helm 1 wheel
Rudder 1 spade rudder
Unsinkable No
Trailerable No
EC certification A
Standard public price ex. VAT (indicative only) N/A
X-35's   Main dimensions
Hull length 34’ 10”
Waterline length 29’ 11”
Beam (width) 10’ 8”
Draft 7’ 1”
Light displacement 9899 lbs
Ballast weight 3748 lbs
Ballast type Cast iron fin with lead bulb
X-35's   Rig and sails
Upwind sail area 797 sq.ft
Downwind sail area 1422 sq.ft
Mainsail area 432 sq.ft
Genoa area 365 sq.ft
Symetric spinnaker area 990 sq.ft
Rigging type Sloop Marconi 9/10
Spars Mast and boom in Aluminum
Number of levels of spreaders 2
Spreaders angle Swept-back
IiFore triangle height (from mast foot to fore stay attachment) 47’ 7”
JiFore triangle base (from mast foot to bottom of forestay) 13’ 8”
PiMainsail hoist measurement (from tack to head) 46’ 10”
EiMainsail foot measurement (from tack to clew) 16’ 1”
X-35's   Performances
Crew 640kg max.
HN (French rating) 28.5
Upwind sail area to displacementiThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.
The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size. Upwind : under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 23 it indicates a fast sailboat.
27.19
Downwind sail area to displacementiThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.
The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size. Upwind : under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 23 it indicates a fast sailboat.
48.54
Displacement-Length ratio (DLR)iThe Displacement Length ratio is a figure that points out the boat's weight compared to its waterline length. DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet).
The DLR can be used to compare the relative mass of different sailboats no matter what their length: a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat.
168
Ballast ratioiThe Ballast ratio is an indicator of the stability; it is obtained by dividing the boat's displacement by the weight of the ballast. Since the stability depends also of the hull shape and the position of the center of gravity, only boats with similar ballast arrangements and hull shape should be considered.
Higher the ballast ratio is, greater is the stability.
38 %
Hull speediAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed".
The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34.
7.33 knots
X-35's   Auxiliary engine
Engine(s) 1
Engine type Inboard engine
Engine (min/max) 19 HP
Fuel type Diesel
Fuel tank capacity 17.2 gal
X-35's   Accommodation
Cabin(s) 1
Berth(s) 8
Head(s) 1
Fresh water tank capacity 26.4 gal

Similar sailboats that might interest you :

Compare4 max.SailboatHull lengthFirst built hull
X-34 Standard34’2007
X-34 Shoal draft34’2007
Xp 3332’ 10”2012
X-362 Sport35’ 2”1998
X-362 Classic35’ 2”1998
Xc 35 Standard34’2014
Xc 35 Shoal draft34’2014
X-37 Standard37’ 2”2004
X-37 Sport37’ 2”2004
X-37 Shoal draft37’ 2”2004
JPK 11035’ 10”2006
A3534’ 8”2006
Catalina 350 MkII Fin keel35’ 2”2007
J/109 Standard35’ 4”2001
J/109 Shoal draft35’ 4”2001
Grand Soleil 40 - B&C Standard36’ 6”2006
Grand Soleil 40 - B&C Deep draft36’ 6”2006
Hunter 33 - 2004 Shoal draft33’ 1”2004
Hunter 33 - 2004 Deep draft33’ 1”2004
Nordship 360 DS36’ 1”2009
^