Detailed sailboat specifications and datasheets since 2015
MetricSI (m)
Imperial & Metricboth
ImperialIMP (ft)

Renown Sloop

Sailboat specifications

The Renown is a 31’2” (9.5m) cruising sailboat designed by John Laurent Giles (United Kingdom). She was built between 1972 and 1980 by Westerly (United Kingdom) with 273 hulls completed. The Sloop version is offered with a classic masthead Marconi sloop rig.

The Renown is as well listed, on Boat-Specs.com, in Ketch version (see all the versions compared).

Renown's main features

Model
Renown
Version
Sloop
Hull type
Monohull
Category
Cruising sailboat
Sailboat builder
Sailboat designer
Country
United Kingdom
Construction
Hull and deck: GRP (glass reinforced polyester)
Number of hulls built
273
First built hull
1972
Last built hull
1980
Appendages
Keel : fin without bulb
Helm
Single helm wheel
Rudder
Single rudder on skeg
Unsinkable
No
Trailerable
No
Standard public price ex. VAT (indicative only)
N/A

Renown's main dimensions

Overall length
31’ 2”9.5 m
Hull length
31’ 2”9.5 m
Waterline length
25’7.62 m
Beam (width)
9’ 6”2.9 m
Draft
4’ 6”1.38 m
Light displacement (MLC)
10851 lb4922 kg
Ballast weight
4189 lb1900 kg
Ballast type
Cast iron

Renown's rig and sails

Upwind sail area
540 ft²50.2 m²
Mainsail area
207 ft²19.2 m²
Genoa area
334 ft²31 m²
Solent area
236 ft²21.9 m²
Jib area
151 ft²14 m²
Stormjib area
60 ft²5.6 m²
Rigging type
Sloop Marconi masthead
Mast configuration
Deck stepped mast
Rotating spars
No
Number of levels of spreaders
1
Spreaders angle
0 °
Spars construction
Aluminum spars
Standing rigging
1x19 strand wire continuous

Renown's performances

Upwind sail area to displacement
 iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.

The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size.

Upwind: under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 25 it indicates a fast sailboat.
187 ft²/T17.35 m²/T
Displacement-length ratio (DLR)
 iThe Displacement Length Ratio (DLR) is a figure that points out the boat's weight compared to its waterline length. The DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet).
The DLR can be used to compare the relative mass of different sailboats no matter what their length:

a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat.
315
Ballast ratio
 iThe Ballast ratio is an indicator of stability; it is obtained by dividing the boat's displacement by the mass of the ballast. Since the stability depends also of the hull shapes and the position of the center of gravity, only the boats with similar ballast arrangements and hull shapes should be compared.

The higher the ballast ratio is, the greater is the stability.
39 %
Critical hull speed
 iAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed".
The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34.
6.70 knots

Renown's auxiliary engine

Engine(s)
1 inboard engine
Engine(s) power
25 HP
Fuel type
Diesel
Fuel tank capacity
23.8 gal90 liters

Renown's accommodations and layout

Cockpit
Center cockpit
Cabin(s)
2
Berth(s) (min./max.)
4 / 6
Head(s)
1
Freshwater tank capacity
35.7 gal135 liters
Maximum headroom
6’ 2”1.9 m
Have you spotted incorrect data?  You can report it in the forum or contact the webmaster

Similar sailboats that may interest you:


Sailboats
First built hull
Hull length
Hallberg-Rassy 33 Mistral (Hallberg-Rassy)
1966
33’ 5”10.18 m
Hallberg-Rassy 35 Rasmus Sloop (Hallberg-Rassy)
1967
34’ 5”10.5 m
Hallberg-Rassy 312 MkII (Hallberg-Rassy)
1986
30’ 11”9.42 m
Longbow Sloop (Westerly)
1971
31’ 2”9.5 m
Renown Ketch (Westerly)
1972
31’ 2”9.5 m
Albin Ballad (Albin Marine)
1971
30’9.14 m
Symphonie Shoal draft (Jeanneau)
1978
31’ 2”9.5 m
Catalina 27 Tall rig (Catalina Yachts)
1971
26’ 10”8.18 m
Catalina 30 MkII Tall rig (Catalina Yachts)
1986
29’ 11”9.12 m
Merlin 28 Fin keel (Westerly)
1984
27’ 1”8.25 m
Fango (Amel)
1985
32’ 10”10 m
Centaur Sloop (Westerly)
1969
25’ 11”7.9 m
Attalia 32 Deep draft (Jeanneau)
1983
30’ 2”9.2 m
Moody 31 MkI Fin keel (Moody)
1983
30’ 8”9.37 m
Nauticat 33 (Siltala Yachts)
1967
33’ 1”10.1 m
Boat-Specs.com uses cookies to improve user experience. By using our website you consent to all cookies in accordance with our Cookie Policy.

Read more