Detailed sailboat specifications and datasheets since 2015
MetricSI (m)
Imperial & Metricboth
ImperialIMP (ft)

Moody 41 Aft Shoal draft

Sailboat specifications

The Moody 41 Aft is a 41’8” (12.7m) cruising sailboat designed by Dixon Yacht Design (United Kingdom). She is built since 2009 by Moody (United Kingdom). The Shoal draft version features a shorter keel to grant access to shallow areas.

The Moody 41 Aft is as well listed, on Boat-Specs.com, in Deep draft version (see all the versions compared).

Moody 41 Aft's main features

Model
Moody 41 Aft
Version
Shoal draft
Hull type
Monohull
Category
Offshore cruising sailboat
Sailboat builder
Sailboat designer
Country
United Kingdom
Construction
GRP (glass reinforced polyester):
- Hull: Sandwich balsa fiberglass polyester
- Deck: Sandwich balsa fiberglass polyester
First built hull
2009
Last built hull
Still in production
Appendages
Keel : L-shaped keel (with bulb)
Helm
Twin helm wheels
Rudder
Single spade rudder
Unsinkable
No
Trailerable
No
EC design category
 iThe CE design category indicates the ability to cope with certain weather conditions (the sailboat is designed for these conditions)

A: Wind < force 9, Waves < 10m
B: Wind < force 8, Waves < 8m
C: Wind < force 6, Waves < 4m
D: Wind < force 4, Waves < 0,5m
A
Standard public price ex. VAT (indicative only)
About 
230 000
 (2020)

Moody 41 Aft's main dimensions

Hull length
41’ 8”12.7 m
Waterline length
35’ 10”10.9 m
Beam (width)
13’ 1”4 m
Draft
5’ 5”1.65 m
Light displacement (MLC)
21605 lb9800 kg
Ballast weight
6063 lb2750 kg
Ballast type
Cast iron

Moody 41 Aft's rig and sails

Upwind sail area
996 ft²92.5 m²
Downwind sail area
1658 ft²154 m²
Mainsail area
474 ft²44 m²
Genoa area
522 ft²48.5 m²
Jib area
355 ft²33 m²
Asymmetric spinnaker area
1184 ft²110 m²
I
 iFore triangle height (from mast foot to fore stay top attachment)
50’ 11”15.52 m
J
 iFore triangle base (from mast foot to bottom of forestay)
14’ 11”4.53 m
P
 iMainsail hoist measurement (from tack to head)
50’15.24 m
E
 iMainsail foot measurement (from tack to clew)
18’ 4”5.59 m
Rigging type
Sloop Marconi 9/10
Mast configuration
Deck stepped mast
Rotating spars
No
Number of levels of spreaders
2
Spreaders angle
Swept-back
Spars construction
Aluminum spars

Moody 41 Aft's performances

Upwind sail area to displacement
 iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.

The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size.

Upwind: under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 25 it indicates a fast sailboat.
217 ft²/T20.2 m²/T
Downwind sail area to displacement
 iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.

The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size.
362 ft²/T33.63 m²/T
Displacement-length ratio (DLR)
 iThe Displacement Length Ratio (DLR) is a figure that points out the boat's weight compared to its waterline length. The DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet).
The DLR can be used to compare the relative mass of different sailboats no matter what their length:

a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat.
214
Ballast ratio
 iThe Ballast ratio is an indicator of stability; it is obtained by dividing the boat's displacement by the mass of the ballast. Since the stability depends also of the hull shapes and the position of the center of gravity, only the boats with similar ballast arrangements and hull shapes should be compared.

The higher the ballast ratio is, the greater is the stability.
28 %
Critical hull speed
 iAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed".
The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34.
8.01 knots

Moody 41 Aft's auxiliary engine

Engine(s)
1 inboard engine
Engine(s) power
38 HP
Fuel type
Diesel
Fuel tank capacity
37 gal140 liters

Moody 41 Aft's accommodations and layout

Cockpit
Closing aft cockpit with opening system
Cabin(s) (min./max.)
2 / 3
Berth(s) (min./max.)
4 / 8
Head(s) (min./max.)
1 / 2
Freshwater tank capacity
84.5 gal320 liters
Fridge/ice-box capacity
34.3 gal130 liters
Have you spotted incorrect data?  You can report it in the forum or contact the webmaster

Similar sailboats that may interest you:


Sailboats
First built hull
Hull length
Hanse 415 Shoal draft (Hanse)
2012
39’ 4”11.99 m
Moody 41 Aft Deep draft (Moody)
2009
41’ 8”12.7 m
Impression 45 Shoal draft (Elan Yachts)
2015
42’ 8”13 m
Hanse 455 Shoal draft (Hanse)
2014
44’ 6”13.55 m
Bavaria Cruiser 45 Shoal draft (Bavaria Yachts)
2010
44’ 7”13.6 m
Moody 45 DS Shoal draft (Moody)
2008
45’13.72 m
Super Maramu (Amel)
1988
52’ 6”16 m
Vision 42 Shoal draft (Bavaria Yachts)
2012
41’12.5 m
Bavaria Cruiser 41 Shoal draft (Bavaria Yachts)
2011
39’ 4”11.99 m
Amel 50 (Amel)
2017
50’ 11”15.51 m
Moody 45 Aft Shoal draft (Moody)
2010
45’13.72 m
Impression 45.1 Shoal draft (Elan Yachts)
2019
42’ 8”13 m
Dufour 430 Shoal draft (Dufour)
2019
41’12.5 m
Impression 40 Shoal draft (Elan Yachts)
2014
37’ 8”11.48 m
Bavaria 40 Cruiser - Farr Shoal draft (Bavaria Yachts)
2010
39’ 4”11.99 m
Boat-Specs.com uses cookies to improve user experience. By using our website you consent to all cookies in accordance with our Cookie Policy.

Read more