Detailed sailboat specifications and datasheets since 2015
MetricSI (m)
Imperial & Metricboth
ImperialIMP (ft)

Lacoste 42

Sailboat specifications

The Lacoste 42 is a 41’1” (12.52m) cruiser-racer sailboat designed by Sparkman & Stephens (United States). She was built between 1985 and 1992 by Dufour (France) and Yachting France (France).

The Lacoste 42 has also been marketed as Dufour 42.

Lacoste 42's main features

Model
Lacoste 42
Hull type
Monohull
Category
Cruiser-racer sailboat
Sailboat builder
Sailboat designer
Country
France
Construction
GRP (glass reinforced polyester):
- Hull: Single skin fiberglass polyester
- Deck: Sandwich balsa fiberglass polyester
First built hull
1985
Last built hull
1992
Appendages
Keel : fin without bulb
Helm
Single helm wheel
Rudder
Single spade rudder
Unsinkable
No
Trailerable
No
Former French navigation category
1
Standard public price ex. VAT (indicative only)
N/A

Lacoste 42's main dimensions

Overall length
42’ 2”12.85 m
Hull length
41’ 1”12.52 m
Waterline length
35’ 10”10.9 m
Beam (width)
13’3.96 m
Draft
7’ 6”2.29 m
Mast height from DWL
56’ 10”17.32 m
Light displacement (MLC)
16535 lb7500 kg
Ballast weight
7121 lb3230 kg
Ballast type
Lead

Lacoste 42's rig and sails

Upwind sail area
969 ft²90 m²
Downwind sail area
1911 ft²177.5 m²
Mainsail area
382 ft²35.5 m²
Genoa area
587 ft²54.5 m²
Symmetric spinnaker area
1528 ft²142 m²
I
 iFore triangle height (from mast foot to fore stay top attachment)
52’ 6”16 m
J
 iFore triangle base (from mast foot to bottom of forestay)
29’ 6”9 m
P
 iMainsail hoist measurement (from tack to head)
46’ 1”14.05 m
E
 iMainsail foot measurement (from tack to clew)
14’ 4”4.35 m
Rigging type
Sloop Marconi masthead
Mast configuration
Deck stepped mast
Rotating spars
No
Number of levels of spreaders
3
Spreaders angle
0 °
Spars construction
Aluminum spars
Standing rigging
1x19 strand wire

Lacoste 42's performances

HN (French rating)
 iHN or "Handicap Nationale" is an empirical rating system used in France allowing various monohulls, of different sizes and designs, to race each other fairly. It is particularly suitable for cruiser and cruiser-racer. Therefore, by comparing these values, we can have an indication of the relative speed of 2 boats.
24.0
Upwind sail area to displacement
 iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.

The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size.

Upwind: under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 25 it indicates a fast sailboat.
253 ft²/T23.49 m²/T
Downwind sail area to displacement
 iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.

The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size.
499 ft²/T46.33 m²/T
Displacement-length ratio (DLR)
 iThe Displacement Length Ratio (DLR) is a figure that points out the boat's weight compared to its waterline length. The DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet).
The DLR can be used to compare the relative mass of different sailboats no matter what their length:

a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat.
164
Ballast ratio
 iThe Ballast ratio is an indicator of stability; it is obtained by dividing the boat's displacement by the mass of the ballast. Since the stability depends also of the hull shapes and the position of the center of gravity, only the boats with similar ballast arrangements and hull shapes should be compared.

The higher the ballast ratio is, the greater is the stability.
43 %
Critical hull speed
 iAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed".
The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34.
8.01 knots

Lacoste 42's auxiliary engine

Engine(s)
1 inboard engine
Engine(s) power
43 HP
Fuel type
Diesel
Fuel tank capacity
42.3 gal160 liters

Lacoste 42's accommodations and layout

Cockpit
Closed aft cockpit
Cabin(s) (min./max.)
2 / 3
Berth(s) (min./max.)
6 / 10
Head(s)
3
Freshwater tank capacity
105.7 gal400 liters
Maximum headroom
6’ 5”1.95 m
Have you spotted incorrect data?  You can report it in the forum or contact the webmaster

Similar sailboats that may interest you:


Sailboats
First built hull
Hull length
X-412 (X-Yachts)
1989
41’12.5 m
First 40 Lead keel (Bénéteau)
2008
40’ 2”12.24 m
Super Maramu (Amel)
1988
52’ 6”16 m
First 41S5 Lead keel (Bénéteau)
1989
40’ 5”12.3 m
J/130 (J/Boats)
1994
42’ 10”13.04 m
Bavaria Cruiser 41 S (Bavaria Yachts)
2011
39’ 4”11.99 m
J/121 (J/Boats)
2017
40’12.2 m
Oyster Lightwave 395 (Oyster)
1988
39’ 6”12.05 m
First 42 S / Deep draft (Bénéteau)
1981
41’ 11”12.77 m
Bénéteau R/C 42 S / Deep draft (Bénéteau)
1981
41’ 11”12.77 m
Dufour 42 (Dufour & Yachting France)
1985
41’ 1”12.52 m
Sun Fast 42 Lead keel (Jeanneau)
1996
40’ 10”12.45 m
First 38 S (Bénéteau)
1982
38’ 6”11.75 m
First 405 Deep draft (Bénéteau)
1985
39’ 4”11.99 m
Sun Légende 41 Regatta (Jeanneau)
1985
40’ 2”12.25 m
Boat-Specs.com uses cookies to improve user experience. By using our website you consent to all cookies in accordance with our Cookie Policy.

Read more