The Southerly 48
is a 48’8” (14.83m) cruising sailboat designed by Stephen Jones Yacht Design
(United Kingdom). She is built since 2020 by Discovery Yachts Group
The Southerly 48
has also been marketed as Southerly 480
Southerly 48's main features
Offshore deck saloon cruising sailboat
GRP (glass reinforced polyester):
Single skin bottom, sandwich sides and deck: fiberglass vinylester vacuum bagged
First built hull
Last built hull
Still in production
Lifting keel : swing keel
Twin helm wheels
Twin spade rudders
EC design category iThe CE design category indicates the ability to cope with certain weather conditions (the sailboat is designed for these conditions)
A: Wind < force 9, Waves < 10m
B: Wind < force 8, Waves < 8m
C: Wind < force 6, Waves < 4m
D: Wind < force 4, Waves < 0,5m
Standard public price ex. VAT (indicative only)
Southerly 48's main dimensions
48’ 8”14.83 m
48’ 8”14.83 m
42’ 10”13.05 m
14’ 7”4.46 m
10’ 2”3.12 m
Draft when appendages up
3’ 4”1 m
Mast height from DWL
71’ 7”21.83 m
Light displacement (MLC)
38043 lb17256 kg
13492 lb6120 kg
Southerly 48's rig and sails
Upwind sail area
1399 ft²130 m²
619 ft²57.5 m²
780 ft²72.5 m²
491 ft²45.6 m²
Sloop Marconi (in-mast furling mainsail) 9/10
Keel stepped mast
Number of levels of spreaders
Southerly 48's performances
Upwind sail area to displacement iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.
The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size.
Upwind: under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 25 it indicates a fast sailboat.
210 ft²/T19.47 m²/T
Displacement-length ratio (DLR) iThe Displacement Length Ratio (DLR) is a figure that points out the boat's weight compared to its waterline length. The DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet).
The DLR can be used to compare the relative mass of different sailboats no matter what their length:
a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat.
Ballast ratio iThe Ballast ratio is an indicator of stability; it is obtained by dividing the boat's displacement by the mass of the ballast. Since the stability depends also of the hull shapes and the position of the center of gravity, only the boats with similar ballast arrangements and hull shapes should be compared.
The higher the ballast ratio is, the greater is the stability.
Critical hull speed iAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed".
The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34.
Southerly 48's auxiliary engine
1 inboard engine
Fuel tank capacity
175.4 gal664 liters
Southerly 48's accommodations and layout
Closed aft cockpit
6 / 8
Freshwater tank capacity
106.5 gal403 liters
Have you spotted incorrect data? You can report it in the forum
or contact the webmaster