Detailed sailboat specifications and datasheets since 2015
MetricSI (m)
Imperial & Metricboth
ImperialIMP (ft)

First 40 Shoal draft

Sailboat specifications

The First 40 is a 40’2” (12.24m) cruiser-racer sailboat designed by Farr Yacht Design (United States). She was built between 2008 and 2016 by Bénéteau (France). The Shoal draft version features a shorter keel to grant access to shallow areas.

The First 40 is as well listed, on Boat-Specs.com, in Deep draft and Lead keel version (see all the versions compared).

First 40's main features

Model
First 40
Version
Shoal draft
Hull type
Monohull
Category
Cruiser-racer sailboat
Sailboat builder
Sailboat designer
Sailboat range
Country
France
Construction
GRP (glass reinforced polyester):
- Hull: Single skin fiberglass polyester
- Deck: Sandwich balsa fiberglass polyester
First built hull
2008
Last built hull
2016
Appendages
Keel : L-shaped keel (with bulb)
Helm
Single helm wheel
Rudder
Single spade rudder
Unsinkable
No
Trailerable
No
EC design category
 iThe CE design category indicates the ability to cope with certain weather conditions (the sailboat is designed for these conditions)

A: Wind < force 9, Waves < 10m
B: Wind < force 8, Waves < 8m
C: Wind < force 6, Waves < 4m
D: Wind < force 4, Waves < 0,5m
A
Standard public price ex. VAT (indicative only)
N/A

First 40's main dimensions

Overall length
41’ 4”12.58 m
Hull length
40’ 2”12.24 m
Waterline length
35’10.67 m
Beam (width)
12’ 10”3.89 m
Draft
6’ 5”1.95 m
Mast height from DWL
63’ 4”19.3 m
Light displacement (MLC)
18331 lb8315 kg
Ballast weight
7363 lb3340 kg
Ballast type
Cast iron
French customs tonnage
15.54 Tx

First 40's rig and sails

Upwind sail area
974 ft²90.5 m²
Downwind sail area
2120 ft²197 m²
Mainsail area
538 ft²50 m²
Genoa area
436 ft²40.5 m²
Symmetric spinnaker area
1421 ft²132 m²
Asymmetric spinnaker area
1582 ft²147 m²
I
 iFore triangle height (from mast foot to fore stay top attachment)
54’ 1”16.5 m
J
 iFore triangle base (from mast foot to bottom of forestay)
15’ 1”4.6 m
P
 iMainsail hoist measurement (from tack to head)
52’ 11”16.11 m
E
 iMainsail foot measurement (from tack to clew)
18’ 2”5.54 m
Rigging type
Sloop Marconi fractional
Mast configuration
Keel stepped mast
Rotating spars
No
Number of levels of spreaders
3
Spreaders angle
Swept-back
Spars construction
Aluminum spars (carbon fiber spars as an option)
Standing rigging
Dyform

First 40's performances

Upwind sail area to displacement
 iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.

The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size.

Upwind: under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 25 it indicates a fast sailboat.
237 ft²/T22.05 m²/T
Downwind sail area to displacement
 iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.

The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size.
517 ft²/T48 m²/T
Displacement-length ratio (DLR)
 iThe Displacement Length Ratio (DLR) is a figure that points out the boat's weight compared to its waterline length. The DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet).
The DLR can be used to compare the relative mass of different sailboats no matter what their length:

a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat.
194
Ballast ratio
 iThe Ballast ratio is an indicator of stability; it is obtained by dividing the boat's displacement by the mass of the ballast. Since the stability depends also of the hull shapes and the position of the center of gravity, only the boats with similar ballast arrangements and hull shapes should be compared.

The higher the ballast ratio is, the greater is the stability.
40 %
Critical hull speed
 iAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed".
The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34.
7.93 knots

First 40's auxiliary engine

Engine(s)
1 inboard engine
Engine(s) power
40 HP
Fuel type
Diesel
Fuel tank capacity
36.5 gal138 liters

First 40's accommodations and layout

Cockpit
Closed aft cockpit
Cabin(s)
3
Berth(s) (min./max.)
6 / 8
Head(s)
1
Freshwater tank capacity
52.8 gal200 liters
Holding tank capacity
21.1 gal80 liters
Fridge/ice-box capacity
26.4 gal100 liters
Boiler capacity
6.6 gal25 liters
Head headroom
6’ 1”1.86 m

First 40's saloon

Maximum headroom
6’ 1”1.87 m

First 40's fore cabin

Maximum headroom
6’1.84 m
Berth length
6’ 8”2.05 m
Berth width
5’ 2”1.6 m

First 40's aft cabin

Maximum headroom
6’ 1”1.85 m
Berth length
6’ 7”2 m
Berth width
4’ 11”1.5 m
Have you spotted incorrect data?  You can report it in the forum or contact the webmaster

Similar sailboats that may interest you:


Sailboats
First built hull
Hull length
First 40 Deep draft (Bénéteau)
2008
40’ 2”12.24 m
Grand Soleil 43 - B&C Shoal draft (Cantiere Del Pardo)
2006
42’ 6”12.95 m
X-43 Shoal draft (X-Yachts)
2003
42’ 5”12.93 m
Grand Soleil 43 - J&J Shoal draft (Cantiere Del Pardo)
1998
42’ 7”12.98 m
J/121 (J/Boats)
2017
40’12.2 m
First 41S5 Fin keel (Bénéteau)
1989
40’ 5”12.3 m
First 42s7 Shoal draft (Bénéteau)
1994
41’ 8”12.7 m
Arcona 410 Shoal draft (Arcona Yachts)
2011
40’12.2 m
First 36.7 Shoal draft (Bénéteau)
2002
35’10.68 m
First 40.7 Shoal draft (Bénéteau)
1997
39’ 1”11.92 m
First 35 - Farr Shoal draft (Bénéteau)
2010
35’10.66 m
Salona 37 Shoal draft (AD Boats)
2006
37’11.29 m
X-37 Shoal draft (X-Yachts)
2004
37’ 2”11.35 m
Salona 38 Shoal draft (AD Boats)
2011
37’ 8”11.5 m
First 405 Shoal draft (Bénéteau)
1985
39’ 4”11.99 m
Boat-Specs.com uses cookies to improve user experience. By using our website you consent to all cookies in accordance with our Cookie Policy.

Read more