Detailed sailboat specifications and datasheets since 2015
MetricSI (m)
Imperial & Metricboth
ImperialIMP (ft)

Sun Liberty 34 (Standard) vs Sun Liberty 34 (Shoal draft)

Main featuresSun Liberty 34 StandardSun Liberty 34 Shoal draft
Model
Sun Liberty 34
Sun Liberty 34
Version
Standard
Shoal draft
Hull type
Monohull
Monohull
Category
Cruising sailboat
Cruising sailboat
Sailboat builder
Jeanneau
Jeanneau
Sailboat designer
Country
France
France
Construction
Hull and deck: GRP (glass reinforced polyester)
Hull and deck: GRP (glass reinforced polyester)
Number of hulls built
284
284
First built hull
1989
1989
Last built hull
1992
1992
Appendages
Keel : L-shaped keel (with bulb)
Keel : L-shaped keel (with bulb)
Helm
Single helm wheel
Single helm wheel
Rudder
Single spade rudder
Single spade rudder
Unsinkable
No
No
Trailerable
No
No
Former French navigation category
1
1
 
Main dimensionsSun Liberty 34 StandardSun Liberty 34 Shoal draft
Overall length
33’ 10”10.3 m
33’ 10”10.3 m
Hull length
32’ 8”9.98 m
32’ 8”9.98 m
Waterline length
26’ 5”8.04 m
26’ 5”8.04 m
Beam (width)
11’ 6”3.5 m
11’ 6”3.5 m
Waterline beam (width)
8’ 8”2.64 m
8’ 8”2.64 m
Draft
6’ 2”1.9 m
4’ 11”1.5 m
Light displacement (MLC)
10362 lb4700 kg
10362 lb4700 kg
Ballast weight
3351 lb1520 kg
3351 lb1520 kg
 
Rig and sailsSun Liberty 34 StandardSun Liberty 34 Shoal draft
Upwind sail area
661 ft²61.4 m²
661 ft²61.4 m²
Downwind sail area
1102 ft²102.39 m²
1102 ft²102.39 m²
Mainsail area
287 ft²26.64 m²
287 ft²26.64 m²
Genoa area
374 ft²34.76 m²
374 ft²34.76 m²
Symmetric spinnaker area
815 ft²75.75 m²
815 ft²75.75 m²
I
 iFore triangle height (from mast foot to fore stay top attachment)
40’ 8”12.4 m
40’ 8”12.4 m
J
 iFore triangle base (from mast foot to bottom of forestay)
11’ 7”3.55 m
11’ 7”3.55 m
P
 iMainsail hoist measurement (from tack to head)
34’ 5”10.5 m
34’ 5”10.5 m
E
 iMainsail foot measurement (from tack to clew)
13’ 7”4.15 m
13’ 7”4.15 m
Rigging type
Sloop Marconi masthead
Sloop Marconi masthead
Mast configuration
Deck stepped mast
Deck stepped mast
Rotating spars
No
No
Number of levels of spreaders
2
2
Spreaders angle
Swept-back
Swept-back
Spars construction
Aluminum spars
Aluminum spars
Standing rigging
1x19 strand wire
1x19 strand wire
 
PerformancesSun Liberty 34 StandardSun Liberty 34 Shoal draft
Upwind sail area to displacement
 iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.

The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size.

Upwind: under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 25 it indicates a fast sailboat.
236 ft²/T21.88 m²/T
236 ft²/T21.88 m²/T
Downwind sail area to displacement
 iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.

The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size.
393 ft²/T36.49 m²/T
393 ft²/T36.49 m²/T
Displacement-length ratio (DLR)
 iThe Displacement Length Ratio (DLR) is a figure that points out the boat's weight compared to its waterline length. The DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet).
The DLR can be used to compare the relative mass of different sailboats no matter what their length:

a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat.
256
256
Ballast ratio
 iThe Ballast ratio is an indicator of stability; it is obtained by dividing the boat's displacement by the mass of the ballast. Since the stability depends also of the hull shapes and the position of the center of gravity, only the boats with similar ballast arrangements and hull shapes should be compared.

The higher the ballast ratio is, the greater is the stability.
32 %
32 %
Critical hull speed
 iAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed".
The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34.
6.88 knots
6.88 knots
 
Auxiliary engineSun Liberty 34 StandardSun Liberty 34 Shoal draft
Engine(s)
1 inboard engine
1 inboard engine
Engine(s) power (min./max.)
18 HP / 27 HP
18 HP / 27 HP
Fuel type
Diesel
Diesel
Fuel tank capacity
26.4 gal100 liters
26.4 gal100 liters
 
Accommodations and layoutSun Liberty 34 StandardSun Liberty 34 Shoal draft
Cockpit
Closed aft cockpit
Closed aft cockpit
Cabin(s)
2
2
Berth(s) (min./max.)
4 / 6
4 / 6
Head(s)
2
2
Freshwater tank capacity
66 gal250 liters
66 gal250 liters
Fridge/ice-box capacity
21.1 gal80 liters
21.1 gal80 liters
Boiler capacity
11.1 gal42 liters
11.1 gal42 liters
Maximum headroom
6’ 7”2 m
6’ 7”2 m
Galley headroom
6’ 5”1.96 m
6’ 5”1.96 m
Head headroom
6’1.82 m
6’1.82 m
 
SaloonSun Liberty 34 StandardSun Liberty 34 Shoal draft
Maximum headroom
6’ 1”1.86 m
6’ 1”1.86 m
Chart table
2’ 6”0.75 m x 1’ 10”0.54 m
2’ 6”0.75 m x 1’ 10”0.54 m
 
Fore cabinSun Liberty 34 StandardSun Liberty 34 Shoal draft
Maximum headroom
6’ 1”1.85 m
6’ 1”1.85 m
Berth length
6’ 5”1.95 m
6’ 5”1.95 m
Berth width
5’ 1”1.55 m
5’ 1”1.55 m
 
Aft cabinSun Liberty 34 StandardSun Liberty 34 Shoal draft
Maximum headroom
6’ 2”1.88 m
6’ 2”1.88 m
Berth length
6’ 4”1.92 m
6’ 4”1.92 m
Berth width
4’ 10”1.45 m
4’ 10”1.45 m
 
Boat-Specs.com uses cookies to improve user experience. By using our website you consent to all cookies in accordance with our Cookie Policy.

Read more