Detailed sailboat specifications and datasheets since 2015
MetricSI (m)
Imperial & Metricboth
ImperialIMP (ft)

Sun Way 25 (Deep draft) vs Sun Way 25 (Shoal draft) vs Sun Way 25 (Keel and centerboard)

Main featuresSun Way 25 Deep draftSun Way 25 Shoal draftSun Way 25 Keel and centerboard
Model
Sun Way 25
Sun Way 25
Sun Way 25
Version
Deep draft
Shoal draft
Keel and centerboard
Hull type
Monohull
Monohull
Monohull
Category
Coastal cruising sailboat
Coastal cruising sailboat
Coastal cruising sailboat
Sailboat builder
Jeanneau
Jeanneau
Jeanneau
Sailboat designer
Country
France
France
France
Construction
GRP (glass reinforced polyester):
- Hull: Single skin fiberglass polyester
- Deck: Sandwich balsa fiberglass polyester
GRP (glass reinforced polyester):
- Hull: Single skin fiberglass polyester
- Deck: Sandwich balsa fiberglass polyester
GRP (glass reinforced polyester):
- Hull: Single skin fiberglass polyester
- Deck: Sandwich balsa fiberglass polyester
Number of hulls built
About 300
About 300
About 300
First built hull
1990
1990
1990
Last built hull
1994
1994
1994
Appendages
Keel : L-shaped keel (with bulb)
Keel : wing keel
Centerboard : pivoting centerboard in the keel
Helm
Single tiller
Single tiller
Single tiller
Rudder
Single spade rudder
Single spade rudder
Single spade rudder
Unsinkable
Yes
Yes
No
Trailerable
No
No
No
Former French navigation category
3
3
3
 
Main dimensionsSun Way 25 Deep draftSun Way 25 Shoal draftSun Way 25 Keel and centerboard
Overall length
25’ 4”7.7 m
25’ 4”7.7 m
25’ 4”7.7 m
Hull length
24’ 10”7.55 m
24’ 10”7.55 m
24’ 10”7.55 m
Waterline length
21’ 8”6.6 m
21’ 8”6.6 m
21’ 8”6.6 m
Beam (width)
9’ 1”2.76 m
9’ 1”2.76 m
9’ 1”2.76 m
Waterline beam (width)
7’ 7”2.32 m
7’ 7”2.32 m
7’ 7”2.32 m
Draft
4’ 1”1.26 m
3’0.9 m
4’ 1”1.26 m
Mast height from DWL
37’ 11”11.55 m
37’ 11”11.55 m
37’ 11”11.55 m
Fore freeboard
3’ 2”0.99 m
3’ 2”0.99 m
3’ 2”0.99 m
Mid-ship freeboard
2’ 10”0.85 m
2’ 10”0.85 m
2’ 10”0.85 m
Light displacement (MLC)
3968 lb1800 kg
4475 lb2030 kg
4652 lb2110 kg
Maximum displacement (MLDC)
5952 lb2700 kg
5952 lb2700 kg
5952 lb2700 kg
Ballast weight
1036 lb470 kg
1102 lb500 kg
1213 lb550 kg
Ballast type
Cast iron
Cast iron
Cast iron exterior ballast with steel centerboard
French customs tonnage
5.10 Tx
5.10 Tx
5.10 Tx
 
Rig and sailsSun Way 25 Deep draftSun Way 25 Shoal draftSun Way 25 Keel and centerboard
Upwind sail area
330 ft²30.69 m²
330 ft²30.69 m²
330 ft²30.69 m²
Downwind sail area
589 ft²54.74 m²
589 ft²54.74 m²
589 ft²54.74 m²
Mainsail area
180 ft²16.74 m²
180 ft²16.74 m²
180 ft²16.74 m²
Genoa area
150 ft²13.95 m²
150 ft²13.95 m²
150 ft²13.95 m²
Symmetric spinnaker area
409 ft²38 m²
409 ft²38 m²
409 ft²38 m²
Rigging type
Sloop Marconi 7/8
Sloop Marconi 7/8
Sloop Marconi 7/8
Mast configuration
Deck stepped mast
Deck stepped mast
Deck stepped mast
Rotating spars
No
No
No
Number of levels of spreaders
1
1
1
Spreaders angle
Swept-back
Swept-back
Swept-back
Spars construction
Aluminum spars
Aluminum spars
Aluminum spars
Standing rigging
1x19 strand wire continuous
1x19 strand wire continuous
1x19 strand wire continuous
 
PerformancesSun Way 25 Deep draftSun Way 25 Shoal draftSun Way 25 Keel and centerboard
Upwind sail area to displacement
 iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.

The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size.

Upwind: under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 25 it indicates a fast sailboat.
223 ft²/T20.74 m²/T
206 ft²/T19.14 m²/T
201 ft²/T18.66 m²/T
Downwind sail area to displacement
 iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.

The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size.
398 ft²/T36.99 m²/T
367 ft²/T34.14 m²/T
358 ft²/T33.27 m²/T
Displacement-length ratio (DLR)
 iThe Displacement Length Ratio (DLR) is a figure that points out the boat's weight compared to its waterline length. The DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet).
The DLR can be used to compare the relative mass of different sailboats no matter what their length:

a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat.
177
200
208
Ballast ratio
 iThe Ballast ratio is an indicator of stability; it is obtained by dividing the boat's displacement by the mass of the ballast. Since the stability depends also of the hull shapes and the position of the center of gravity, only the boats with similar ballast arrangements and hull shapes should be compared.

The higher the ballast ratio is, the greater is the stability.
26 %
25 %
26 %
Wetted area
155 ft²14.37 m²
155 ft²14.37 m²
155 ft²14.37 m²
Righting moment @ 1°
 iThe righting moment is a moment (torque) that tends to restore a boat to its previous position after heeling. Its value corresponds to the torque needed to heel the boat for this angle.
Higher the righting moment is for an angle, greater is the stability.
233 lb.ft32 kg.m
233 lb.ft32 kg.m
233 lb.ft32 kg.m
Maximum transverse section
9 ft²0.82 m²
9 ft²0.82 m²
9 ft²0.82 m²
Critical hull speed
 iAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed".
The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34.
6.24 knots
6.24 knots
6.24 knots
 
Auxiliary engineSun Way 25 Deep draftSun Way 25 Shoal draftSun Way 25 Keel and centerboard
Engine(s)
1 inboard engine
1 inboard engine
1 inboard engine
Engine(s) power
9 HP
9 HP
9 HP
Fuel type
Diesel
Diesel
Diesel
Fuel tank capacity
7.1 gal27 liters
7.1 gal27 liters
7.1 gal27 liters
 
Accommodations and layoutSun Way 25 Deep draftSun Way 25 Shoal draftSun Way 25 Keel and centerboard
Cockpit
Open aft cockpit
Open aft cockpit
Open aft cockpit
Berth(s)
4
4
4
Head(s)
1
1
1
Freshwater tank capacity
13.2 gal50 liters
13.2 gal50 liters
13.2 gal50 liters
Maximum headroom
5’ 8”1.75 m
5’ 8”1.75 m
5’ 8”1.75 m
Galley headroom
5’ 6”1.68 m
5’ 6”1.68 m
5’ 6”1.68 m
Head headroom
5’ 5”1.65 m
5’ 5”1.65 m
5’ 5”1.65 m
 
SaloonSun Way 25 Deep draftSun Way 25 Shoal draftSun Way 25 Keel and centerboard
Maximum headroom
5’ 5”1.64 m
5’ 5”1.64 m
5’ 5”1.64 m
Saloon table length
3’ 4”1 m
3’ 4”1 m
3’ 4”1 m
Saloon table width
2’0.62 m
2’0.62 m
2’0.62 m
 
Fore cabinSun Way 25 Deep draftSun Way 25 Shoal draftSun Way 25 Keel and centerboard
Maximum headroom
4’ 4”1.32 m
4’ 4”1.32 m
4’ 4”1.32 m
Berth length
6’ 2”1.9 m
6’ 2”1.9 m
6’ 2”1.9 m
Berth width
5’ 2”1.58 m
5’ 2”1.58 m
5’ 2”1.58 m
 
Aft cabinSun Way 25 Deep draftSun Way 25 Shoal draftSun Way 25 Keel and centerboard
Berth length
6’ 2”1.89 m
6’ 2”1.89 m
6’ 2”1.89 m
Berth width
4’ 5”1.35 m
4’ 5”1.35 m
4’ 5”1.35 m
 
Boat-Specs.com uses cookies to improve user experience. By using our website you consent to all cookies in accordance with our Cookie Policy.

Read more