Detailed sailboat specifications and datasheets since 2015
MetricSI (m)
Imperial & Metricboth
ImperialIMP (ft)

Evasion 22 (Fin keel) vs Evasion 22 (Twin keel)

Main featuresEvasion 22 Fin keelEvasion 22 Twin keel
Model
Evasion 22
Evasion 22
Version
Fin keel
Twin keel
Hull type
Monohull
Monohull
Category
Coastal motorsailer
Coastal motorsailer
Sailboat builder
Bénéteau
Bénéteau
Sailboat designer
Sailboat range
Country
France
France
Construction
GRP (glass reinforced polyester):
- Hull: Single skin fiberglass polyester
- Deck: Sandwich balsa fiberglass polyester
GRP (glass reinforced polyester):
- Hull: Single skin fiberglass polyester
- Deck: Sandwich balsa fiberglass polyester
Number of hulls built
278
278
First built hull
1980
1980
Last built hull
1984
1984
Appendages
Keel : fin without bulb
Twin keel : fin without bulb
Helm
Single tiller
Single tiller
Rudder
Single transom hung rudder
Single transom hung rudder
Unsinkable
No
No
Trailerable
No
No
Former French navigation category
3
3
 
Main dimensionsEvasion 22 Fin keelEvasion 22 Twin keel
Overall length
22’ 10”6.95 m
22’ 10”6.95 m
Hull length
22’6.7 m
22’6.7 m
Waterline length
19’ 2”5.85 m
19’ 2”5.85 m
Beam (width)
8’ 6”2.6 m
8’ 6”2.6 m
Draft
3’ 4”1 m
2’ 10”0.85 m
Light displacement (MLC)
3968 lb1800 kg
3968 lb1800 kg
Ballast weight
1609 lb730 kg
1609 lb730 kg
Ballast type
Cast iron
Cast iron
French customs tonnage
4.40 Tx
4.40 Tx
 
Rig and sailsEvasion 22 Fin keelEvasion 22 Twin keel
Upwind sail area
241 ft²22.37 m²
241 ft²22.37 m²
Mainsail area
125 ft²11.6 m²
125 ft²11.6 m²
Genoa area
116 ft²10.77 m²
116 ft²10.77 m²
Rigging type
Sloop Marconi masthead
Sloop Marconi masthead
Mast configuration
Deck stepped mast
Deck stepped mast
Rotating spars
No
No
Number of levels of spreaders
1
1
Spreaders angle
0 °
0 °
Spars construction
Aluminum spars
Aluminum spars
Standing rigging
1x19 strand wire continuous
1x19 strand wire continuous
 
PerformancesEvasion 22 Fin keelEvasion 22 Twin keel
Upwind sail area to displacement
 iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.

The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size.

Upwind: under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 25 it indicates a fast sailboat.
163 ft²/T15.12 m²/T
163 ft²/T15.12 m²/T
Displacement-length ratio (DLR)
 iThe Displacement Length Ratio (DLR) is a figure that points out the boat's weight compared to its waterline length. The DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet).
The DLR can be used to compare the relative mass of different sailboats no matter what their length:

a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat.
255
255
Ballast ratio
 iThe Ballast ratio is an indicator of stability; it is obtained by dividing the boat's displacement by the mass of the ballast. Since the stability depends also of the hull shapes and the position of the center of gravity, only the boats with similar ballast arrangements and hull shapes should be compared.

The higher the ballast ratio is, the greater is the stability.
41 %
41 %
Critical hull speed
 iAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed".
The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34.
5.87 knots
5.87 knots
 
Auxiliary engineEvasion 22 Fin keelEvasion 22 Twin keel
Engine(s)
1 inboard engine
1 inboard engine
Engine(s) power (min./max.)
8 HP / 25 HP
8 HP / 25 HP
Fuel type
Diesel
Diesel
 
Accommodations and layoutEvasion 22 Fin keelEvasion 22 Twin keel
Cockpit
Closed aft cockpit
Closed aft cockpit
Cabin(s)
1
1
Berth(s) (min./max.)
2 / 4
2 / 4
Head(s)
1
1
Freshwater tank capacity
13.2 gal50 liters
13.2 gal50 liters
Fridge/ice-box capacity
11.1 gal42 liters
11.1 gal42 liters
Maximum headroom
5’ 8”1.75 m
5’ 8”1.75 m
 
Boat-Specs.com uses cookies to improve user experience. By using our website you consent to all cookies in accordance with our Cookie Policy.

Read more