Detailed sailboat specifications and datasheets since 2015
MetricSI (m)
Imperial & Metricboth
ImperialIMP (ft)

First 53F5 (Deep draft) vs First 53F5 (Shoal draft)

Main featuresFirst 53F5 Deep draftFirst 53F5 Shoal draft
Model
First 53F5
First 53F5
Version
Deep draft
Shoal draft
Hull type
Monohull
Monohull
Category
Offshore cruiser-racer sailboat
Offshore cruiser-racer sailboat
Sailboat builder
Bénéteau
Bénéteau
Sailboat designer
Sailboat range
Country
France
France
Construction
GRP (glass reinforced polyester):
- Hull: Single skin fiberglass polyester
- Deck: Sandwich balsa fiberglass polyester
GRP (glass reinforced polyester):
- Hull: Single skin fiberglass polyester
- Deck: Sandwich balsa fiberglass polyester
Number of hulls built
About 50
About 50
First built hull
1990
1990
Last built hull
1993
1993
Appendages
Keel : L-shaped keel (with bulb)
Keel : wing keel
Helm
Twin helm wheels
Twin helm wheels
Rudder
Single spade rudder
Single spade rudder
Unsinkable
No
No
Trailerable
No
No
Former French navigation category
1
1
 
Main dimensionsFirst 53F5 Deep draftFirst 53F5 Shoal draft
Overall length
53’ 1”16.2 m
53’ 1”16.2 m
Hull length
51’ 8”15.75 m
51’ 8”15.75 m
Waterline length
43’ 4”13.2 m
43’ 4”13.2 m
Beam (width)
14’ 8”4.48 m
14’ 8”4.48 m
Draft
8’2.45 m
6’ 2”1.9 m
Light displacement (MLC)
30865 lb14000 kg
30865 lb14000 kg
Ballast weight
9480 lb4300 kg
9480 lb4300 kg
 
Rig and sailsFirst 53F5 Deep draftFirst 53F5 Shoal draft
Upwind sail area
1507 ft²140 m²
1507 ft²140 m²
Downwind sail area
2583 ft²240 m²
2583 ft²240 m²
Mainsail area
646 ft²60 m²
646 ft²60 m²
Genoa area
861 ft²80 m²
861 ft²80 m²
Symmetric spinnaker area
1938 ft²180 m²
1938 ft²180 m²
I
 iFore triangle height (from mast foot to fore stay top attachment)
63’ 4”19.3 m
63’ 4”19.3 m
J
 iFore triangle base (from mast foot to bottom of forestay)
17’ 7”5.35 m
17’ 7”5.35 m
P
 iMainsail hoist measurement (from tack to head)
57’ 1”17.4 m
57’ 1”17.4 m
E
 iMainsail foot measurement (from tack to clew)
19’5.8 m
19’5.8 m
Rigging type
Sloop Marconi masthead
Sloop Marconi masthead
Mast configuration
Keel stepped mast
Keel stepped mast
Rotating spars
No
No
Number of levels of spreaders
2
2
Spreaders angle
Swept-back
Swept-back
Spars construction
Aluminum spars
Aluminum spars
Standing rigging
Single-strand (ROD) discontinuous
Single-strand (ROD) discontinuous
 
PerformancesFirst 53F5 Deep draftFirst 53F5 Shoal draft
Upwind sail area to displacement
 iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.

The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size.

Upwind: under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 25 it indicates a fast sailboat.
259 ft²/T24.1 m²/T
259 ft²/T24.1 m²/T
Downwind sail area to displacement
 iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.

The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size.
445 ft²/T41.32 m²/T
445 ft²/T41.32 m²/T
Displacement-length ratio (DLR)
 iThe Displacement Length Ratio (DLR) is a figure that points out the boat's weight compared to its waterline length. The DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet).
The DLR can be used to compare the relative mass of different sailboats no matter what their length:

a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat.
172
172
Ballast ratio
 iThe Ballast ratio is an indicator of stability; it is obtained by dividing the boat's displacement by the mass of the ballast. Since the stability depends also of the hull shapes and the position of the center of gravity, only the boats with similar ballast arrangements and hull shapes should be compared.

The higher the ballast ratio is, the greater is the stability.
31 %
31 %
Righting moment @ 30°
 iThe righting moment is a moment (torque) that tends to restore a boat to its previous position after heeling. Its value corresponds to the torque needed to heel the boat for this angle.
Higher the righting moment is for an angle, greater is the stability.
70356 lb.ft9727 kg.m
70356 lb.ft9727 kg.m
Maximum righting moment
 iThe righting moment is a moment (torque) that tends to restore a boat to its previous position after heeling. Its value corresponds to the torque needed to heel the boat for this angle.
Higher the righting moment is for an angle, greater is the stability.
91281 lb.ft12620 kg.m @ 55.00 °
91281 lb.ft12620 kg.m @ 55.00 °
Critical hull speed
 iAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed".
The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34.
8.82 knots
8.82 knots
 
Auxiliary engineFirst 53F5 Deep draftFirst 53F5 Shoal draft
Engine(s)
1 inboard engine
1 inboard engine
Engine(s) power
80 HP
80 HP
Fuel type
Diesel
Diesel
Fuel tank capacity
118.9 gal450 liters
118.9 gal450 liters
 
Accommodations and layoutFirst 53F5 Deep draftFirst 53F5 Shoal draft
Cockpit
Closed aft cockpit
Closed aft cockpit
Cabin(s) (min./max.)
3 / 5
3 / 5
Berth(s) (min./max.)
6 / 10
6 / 10
Head(s) (min./max.)
2 / 4
2 / 4
Freshwater tank capacity
92.5 gal350 liters
92.5 gal350 liters
Boiler capacity
11.1 gal42 liters
11.1 gal42 liters
 
Fore cabinFirst 53F5 Deep draftFirst 53F5 Shoal draft
Berth length
6’ 7”2 m
6’ 7”2 m
Berth width
4’ 7”1.4 m
4’ 7”1.4 m
 
Aft cabinFirst 53F5 Deep draftFirst 53F5 Shoal draft
Berth length
6’ 7”2 m
6’ 7”2 m
Berth width
4’ 7”1.4 m
4’ 7”1.4 m
 
Boat-Specs.com uses cookies to improve user experience. By using our website you consent to all cookies in accordance with our Cookie Policy.

Read more