Detailed sailboat specifications and datasheets since 2015
MetricSI (m)
Imperial & Metricboth
ImperialIMP (ft)

Grand Soleil 46.3 (Medium draft) vs Grand Soleil 46.3 (Shoal draft) vs Grand Soleil 46.3 (Deep draft)

Main featuresGrand Soleil 46.3 Medium draftGrand Soleil 46.3 Shoal draftGrand Soleil 46.3 Deep draft
Model
Grand Soleil 46.3
Grand Soleil 46.3
Grand Soleil 46.3
Version
Medium draft
Shoal draft
Deep draft
Hull type
Monohull
Monohull
Monohull
Category
Cruiser-racer sailboat
Cruiser-racer sailboat
Cruiser-racer sailboat
Sailboat builder
Cantiere Del Pardo
Cantiere Del Pardo
Cantiere Del Pardo
Sailboat designer
Sailboat range
Country
Italy
Italy
Italy
Construction
Hull and deck: GRP (glass reinforced polyester)
Hull and deck: GRP (glass reinforced polyester)
Hull and deck: GRP (glass reinforced polyester)
First built hull
1997
1997
1997
Last built hull
2003
2003
2003
Appendages
Keel : L-shaped keel (with bulb)
Keel : L-shaped keel (with bulb)
Keel : L-shaped keel (with bulb)
Helm
Single helm wheel
Single helm wheel
Single helm wheel
Rudder
Single spade rudder
Single spade rudder
Single spade rudder
Unsinkable
No
No
No
Trailerable
No
No
No
 
Main dimensionsGrand Soleil 46.3 Medium draftGrand Soleil 46.3 Shoal draftGrand Soleil 46.3 Deep draft
Overall length
47’ 4”14.42 m
47’ 4”14.42 m
47’ 4”14.42 m
Hull length
45’ 11”13.98 m
45’ 11”13.98 m
45’ 11”13.98 m
Waterline length
39’11.9 m
39’11.9 m
39’11.9 m
Beam (width)
14’ 5”4.4 m
14’ 5”4.4 m
14’ 5”4.4 m
Draft
7’ 2”2.2 m
5’ 8”1.75 m
7’ 11”2.4 m
Light displacement (MLC)
24251 lb11000 kg
24251 lb11000 kg
24251 lb11000 kg
Ballast weight
8598 lb3900 kg
8598 lb3900 kg
8598 lb3900 kg
 
Rig and sailsGrand Soleil 46.3 Medium draftGrand Soleil 46.3 Shoal draftGrand Soleil 46.3 Deep draft
Upwind sail area
1367 ft²127 m²
1367 ft²127 m²
1367 ft²127 m²
Rigging type
Sloop Marconi masthead
Sloop Marconi masthead
Sloop Marconi masthead
Mast configuration
Keel stepped mast
Keel stepped mast
Keel stepped mast
Rotating spars
No
No
No
Number of levels of spreaders
3
3
3
Spreaders angle
0 °
0 °
0 °
Spars construction
Aluminum spars (carbon fiber spars as an option)
Aluminum spars (carbon fiber spars as an option)
Aluminum spars (carbon fiber spars as an option)
 
PerformancesGrand Soleil 46.3 Medium draftGrand Soleil 46.3 Shoal draftGrand Soleil 46.3 Deep draft
Upwind sail area to displacement
 iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.

The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size.

Upwind: under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 25 it indicates a fast sailboat.
276 ft²/T25.68 m²/T
276 ft²/T25.68 m²/T
276 ft²/T25.68 m²/T
Displacement-length ratio (DLR)
 iThe Displacement Length Ratio (DLR) is a figure that points out the boat's weight compared to its waterline length. The DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet).
The DLR can be used to compare the relative mass of different sailboats no matter what their length:

a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat.
185
185
185
Ballast ratio
 iThe Ballast ratio is an indicator of stability; it is obtained by dividing the boat's displacement by the mass of the ballast. Since the stability depends also of the hull shapes and the position of the center of gravity, only the boats with similar ballast arrangements and hull shapes should be compared.

The higher the ballast ratio is, the greater is the stability.
35 %
35 %
35 %
Critical hull speed
 iAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed".
The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34.
8.37 knots
8.37 knots
8.37 knots
 
Auxiliary engineGrand Soleil 46.3 Medium draftGrand Soleil 46.3 Shoal draftGrand Soleil 46.3 Deep draft
Engine(s)
1 inboard engine
1 inboard engine
1 inboard engine
Engine(s) power
56 HP
56 HP
56 HP
Fuel type
Diesel
Diesel
Diesel
Fuel tank capacity
47.6 gal180 liters
47.6 gal180 liters
47.6 gal180 liters
 
Accommodations and layoutGrand Soleil 46.3 Medium draftGrand Soleil 46.3 Shoal draftGrand Soleil 46.3 Deep draft
Cockpit
Closed aft cockpit
Closed aft cockpit
Closed aft cockpit
Cabin(s) (min./max.)
3 / 4
3 / 4
3 / 4
Berth(s) (min./max.)
6 / 8
6 / 8
6 / 8
Head(s)
2
2
2
Freshwater tank capacity
118.9 gal450 liters
118.9 gal450 liters
118.9 gal450 liters
 
Boat-Specs.com uses cookies to improve user experience. By using our website you consent to all cookies in accordance with our Cookie Policy.

Read more