Detailed sailboat specifications and datasheets since 2015
MetricSI (m)
Imperial & Metricboth
ImperialIMP (ft)

Sense 55 (Deep draft) vs Sense 55 (Shoal draft)

Main featuresSense 55 Deep draftSense 55 Shoal draft
Model
Sense 55
Sense 55
Version
Deep draft
Shoal draft
Hull type
Monohull
Monohull
Category
Cruising sailboat
Cruising sailboat
Sailboat builder
Bénéteau
Bénéteau
Sailboat designer
Sailboat range
Country
France
France
Construction
GRP (glass reinforced polyester):
- Hull: Single skin fiberglass polyester
- Deck: Sandwich balsa fiberglass polyester
GRP (glass reinforced polyester):
- Hull: Single skin fiberglass polyester
- Deck: Sandwich balsa fiberglass polyester
First built hull
2011
2011
Last built hull
2016
2016
Appendages
Keel : L-shaped keel (with bulb)
Keel : L-shaped keel (with bulb)
Helm
Twin helm wheels
Twin helm wheels
Rudder
Twin spade rudders
Twin spade rudders
Unsinkable
No
No
Trailerable
No
No
EC design category
 iThe CE design category indicates the ability to cope with certain weather conditions (the sailboat is designed for these conditions)

A: Wind < force 9, Waves < 10m
B: Wind < force 8, Waves < 8m
C: Wind < force 6, Waves < 4m
D: Wind < force 4, Waves < 0,5m
A
A
 
Main dimensionsSense 55 Deep draftSense 55 Shoal draft
Overall length
56’ 5”17.2 m
56’ 5”17.2 m
Hull length
55’ 1”16.8 m
55’ 1”16.8 m
Waterline length
52’ 4”15.93 m
52’ 4”15.93 m
Beam (width)
16’ 4”4.97 m
16’ 4”4.97 m
Draft
7’ 11”2.4 m
6’ 1”1.85 m
Mast height from DWL
78’ 5”23.9 m
78’ 5”23.9 m
Light displacement (MLC)
40918 lb18560 kg
42241 lb19160 kg
Ballast weight
10803 lb4900 kg
12125 lb5500 kg
Ballast type
Cast iron
Cast iron
 
Rig and sailsSense 55 Deep draftSense 55 Shoal draft
Upwind sail area
1641 ft²152.5 m²
1641 ft²152.5 m²
Downwind sail area
3039 ft²282.3 m²
3039 ft²282.3 m²
Mainsail area
797 ft²74 m²
797 ft²74 m²
Genoa area
845 ft²78.5 m²
845 ft²78.5 m²
Asymmetric spinnaker area
2242 ft²208.3 m²
2242 ft²208.3 m²
I
 iFore triangle height (from mast foot to fore stay top attachment)
70’21.35 m
70’21.35 m
J
 iFore triangle base (from mast foot to bottom of forestay)
24’7.31 m
24’7.31 m
P
 iMainsail hoist measurement (from tack to head)
66’ 4”20.2 m
66’ 4”20.2 m
E
 iMainsail foot measurement (from tack to clew)
20’ 10”6.35 m
20’ 10”6.35 m
Rigging type
Sloop Marconi 9/10
Sloop Marconi 9/10
Mast configuration
Deck stepped mast
Deck stepped mast
Rotating spars
No
No
Number of levels of spreaders
2
2
Spreaders angle
Swept-back
Swept-back
Spars construction
Aluminum spars
Aluminum spars
Standing rigging
1x19 strand wire
1x19 strand wire
 
PerformancesSense 55 Deep draftSense 55 Shoal draft
Upwind sail area to displacement
 iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.

The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size.

Upwind: under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 25 it indicates a fast sailboat.
234 ft²/T21.75 m²/T
229 ft²/T21.3 m²/T
Downwind sail area to displacement
 iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.

The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size.
433 ft²/T40.27 m²/T
424 ft²/T39.43 m²/T
Displacement-length ratio (DLR)
 iThe Displacement Length Ratio (DLR) is a figure that points out the boat's weight compared to its waterline length. The DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet).
The DLR can be used to compare the relative mass of different sailboats no matter what their length:

a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat.
130
134
Ballast ratio
 iThe Ballast ratio is an indicator of stability; it is obtained by dividing the boat's displacement by the mass of the ballast. Since the stability depends also of the hull shapes and the position of the center of gravity, only the boats with similar ballast arrangements and hull shapes should be compared.

The higher the ballast ratio is, the greater is the stability.
26 %
29 %
Critical hull speed
 iAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed".
The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34.
9.69 knots
9.69 knots
 
Auxiliary engineSense 55 Deep draftSense 55 Shoal draft
Engine(s)
1 inboard engine
1 inboard engine
Engine(s) power (min./max.)
75 HP / 120 HP
75 HP / 120 HP
Fuel type
Diesel
Diesel
Fuel tank capacity
109.6 gal415 liters
109.6 gal415 liters
 
Accommodations and layoutSense 55 Deep draftSense 55 Shoal draft
Cockpit
Open aft cockpit
Open aft cockpit
Cabin(s) (min./max.)
3 / 4
3 / 4
Berth(s) (min./max.)
6 / 8
6 / 8
Head(s)
3
3
Freshwater tank capacity
169.1 gal640 liters
169.1 gal640 liters
Holding tank capacity
21.1 gal80 liters
21.1 gal80 liters
Fridge/ice-box capacity
79.3 gal300 liters
79.3 gal300 liters
Boiler capacity
10.6 gal40 liters
10.6 gal40 liters
Maximum headroom
6’ 7”2 m
6’ 7”2 m
Galley headroom
6’ 6”1.97 m
6’ 6”1.97 m
 
SaloonSense 55 Deep draftSense 55 Shoal draft
Maximum headroom
6’ 6”1.98 m
6’ 6”1.98 m
 
Fore cabinSense 55 Deep draftSense 55 Shoal draft
Maximum headroom
6’ 5”1.94 m
6’ 5”1.94 m
Berth length
6’ 8”2.03 m
6’ 8”2.03 m
Berth width (head/feet)
5’ 7”1.7 m / 4’1.21 m
5’ 7”1.7 m / 4’1.21 m
 
Aft cabinSense 55 Deep draftSense 55 Shoal draft
Maximum headroom
6’ 6”1.97 m
6’ 6”1.97 m
Berth length
6’ 7”2 m
6’ 7”2 m
Berth width (head/feet)
5’ 1”1.56 m / 3’ 4”1 m
5’ 1”1.56 m / 3’ 4”1 m
 
Boat-Specs.com uses cookies to improve user experience. By using our website you consent to all cookies in accordance with our Cookie Policy.

Read more