Detailed sailboat specifications and datasheets since 2015
MetricSI (m)
Imperial & Metricboth
ImperialIMP (ft)

Hanse 505 (Standard) vs Hanse 505 (Shoal draft)

Main featuresHanse 505 StandardHanse 505 Shoal draft
Model
Hanse 505
Hanse 505
Version
Standard
Shoal draft
Hull type
Monohull
Monohull
Category
Offshore cruising sailboat
Offshore cruising sailboat
Sailboat builder
Hanse
Hanse
Sailboat designer
Country
Germany
Germany
Construction
GRP (glass reinforced polyester):
Single skin bottom, sandwich sides and deck: balsa fiberglass polyester
GRP (glass reinforced polyester):
Single skin bottom, sandwich sides and deck: balsa fiberglass polyester
First built hull
2014
2014
Last built hull
2018
2018
Appendages
Keel : T-shaped keel (with bulb), L-shaped in option
Keel : L-shaped keel (with bulb)
Helm
Twin helm wheels
Twin helm wheels
Rudder
Single spade rudder
Single spade rudder
Unsinkable
No
No
Trailerable
No
No
EC design category
 iThe CE design category indicates the ability to cope with certain weather conditions (the sailboat is designed for these conditions)

A: Wind < force 9, Waves < 10m
B: Wind < force 8, Waves < 8m
C: Wind < force 6, Waves < 4m
D: Wind < force 4, Waves < 0,5m
A
A
Standard public price ex. VAT (indicative only)
316680 2017
316680 2017
 
Main dimensionsHanse 505 StandardHanse 505 Shoal draft
Overall length
49’ 2”15 m
49’ 2”15 m
Hull length
48’ 8”14.85 m
48’ 8”14.85 m
Waterline length
44’ 5”13.54 m
44’ 5”13.54 m
Beam (width)
15’ 7”4.75 m
15’ 7”4.75 m
Draft
7’ 10”2.38 m
6’ 6”1.98 m
Mast height from DWL
72’ 6”22.1 m
72’ 6”22.1 m
Light displacement (MLC)
30865 lb14000 kg
30865 lb14000 kg
Ballast weight
8818 lb4000 kg
8818 lb4000 kg
 
Rig and sailsHanse 505 StandardHanse 505 Shoal draft
Upwind sail area
1281 ft²119 m²
1281 ft²119 m²
Mainsail area
727 ft²67.5 m²
727 ft²67.5 m²
Jib area
554 ft²51.5 m²
554 ft²51.5 m²
I
 iFore triangle height (from mast foot to fore stay top attachment)
64’ 1”19.55 m
64’ 1”19.55 m
J
 iFore triangle base (from mast foot to bottom of forestay)
19’ 2”5.85 m
19’ 2”5.85 m
P
 iMainsail hoist measurement (from tack to head)
60’ 2”18.35 m
60’ 2”18.35 m
E
 iMainsail foot measurement (from tack to clew)
20’ 2”6.15 m
20’ 2”6.15 m
Rigging type
Sloop Marconi 9/10
Sloop Marconi 9/10
Mast configuration
Deck stepped mast
Deck stepped mast
Rotating spars
No
No
Number of levels of spreaders
2
2
Spreaders angle
Swept-back
Swept-back
Spars construction
Aluminum spars
Aluminum spars
Standing rigging
1x19 strand wire
1x19 strand wire
 
PerformancesHanse 505 StandardHanse 505 Shoal draft
Upwind sail area to displacement
 iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.

The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size.

Upwind: under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 25 it indicates a fast sailboat.
221 ft²/T20.49 m²/T
221 ft²/T20.49 m²/T
Displacement-length ratio (DLR)
 iThe Displacement Length Ratio (DLR) is a figure that points out the boat's weight compared to its waterline length. The DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet).
The DLR can be used to compare the relative mass of different sailboats no matter what their length:

a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat.
160
160
Ballast ratio
 iThe Ballast ratio is an indicator of stability; it is obtained by dividing the boat's displacement by the mass of the ballast. Since the stability depends also of the hull shapes and the position of the center of gravity, only the boats with similar ballast arrangements and hull shapes should be compared.

The higher the ballast ratio is, the greater is the stability.
29 %
29 %
Righting moment @ 30°
 iThe righting moment is a moment (torque) that tends to restore a boat to its previous position after heeling. Its value corresponds to the torque needed to heel the boat for this angle.
Higher the righting moment is for an angle, greater is the stability.
57864 lb.ft8000 kg.m
57141 lb.ft7900 kg.m
Maximum righting moment
 iThe righting moment is a moment (torque) that tends to restore a boat to its previous position after heeling. Its value corresponds to the torque needed to heel the boat for this angle.
Higher the righting moment is for an angle, greater is the stability.
69437 lb.ft9600 kg.m @ 50.00 °
66544 lb.ft9200 kg.m @ 50.00 °
Critical hull speed
 iAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed".
The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34.
8.93 knots
8.93 knots
 
Auxiliary engineHanse 505 StandardHanse 505 Shoal draft
Engine(s)
1 inboard engine
1 inboard engine
Engine(s) power
72 HP
72 HP
Fuel type
Diesel
Diesel
Fuel tank capacity
74 gal280 liters
74 gal280 liters
 
Accommodations and layoutHanse 505 StandardHanse 505 Shoal draft
Cockpit
Closing aft cockpit with opening system
Closing aft cockpit with opening system
Cabin(s) (min./max.)
3 / 5
3 / 5
Berth(s) (min./max.)
6 / 11
6 / 11
Head(s) (min./max.)
2 / 3
2 / 3
Freshwater tank capacity
171.7 gal650 liters
171.7 gal650 liters
Holding tank capacity
18.5 gal70 liters
18.5 gal70 liters
Fridge/ice-box capacity
37 gal140 liters
37 gal140 liters
Boiler capacity
5.3 gal20 liters
5.3 gal20 liters
 
Boat-Specs.com uses cookies to improve user experience. By using our website you consent to all cookies in accordance with our Cookie Policy.

Read more