Boat-Specs.com

Sailboat specifications and datasheets

Nauticat 525

The Nauticat 525 is a 52’2” monohull sailboat designed by Design Office Siltala. She was built by Nauticat Yachts (Finland) and made of monolithic fiberglass / polyester. The production started in 2010 .

The Nauticat 525 belongs to the Nauticat range.

Nauticat Yachts Nauticat 525 Nauticat Yachts Nauticat 525 sailplanNauticat Yachts Nauticat 525 layoutNauticat Yachts Nauticat 525 layoutNauticat Yachts Nauticat 525 sailingNauticat Yachts Nauticat 525 sailingNauticat Yachts Nauticat 525 sailingNauticat Yachts Nauticat 525 accommodationsNauticat Yachts Nauticat 525 accommodationsNauticat Yachts Nauticat 525 accommodationsNauticat Yachts Nauticat 525 accommodationsNauticat Yachts Nauticat 525 accommodationsNauticat Yachts Nauticat 525 accommodationsNauticat Yachts Nauticat 525 accommodations
Nauticat 525's   Main Features
Model Nauticat 525
Type of hull Monohull
Category Offshore motorsailer
Shipyard
Designer Design Office Siltala
Range Nauticat
Construction Hull and deck:
monolithic fiberglass / polyester
First built hull 2010
Last built hull Still in production
Appendages Keel :
Semi-long keel
Helm 2 wheels
Rudder 1 semi-spade rudder
Cockpit Raised aft cockpit
Unsinkable No
Trailerable No
EC certification A
Standard public price ex. VAT (indicative only) About
880 000
(2017)
Nauticat 525's   Main dimensions
Length overall 54’ 7”
Hull length 52’ 2”
Waterline length 40’
Beam (width) 15’ 1”
Draft 7’ 2”
Mast height from DWL 77’ 1”
Fore freeboard 5’ 8”
Mid-ship freeboard 5’ 5”
Light displacement 52911 lbs
Ballast weight 19180 lbs
Nauticat 525's   Rig and sails
Upwind sail area 1525 sq.ft
Downwind sail area 2918 sq.ft
Mainsail area 464 sq.ft
Mizzen sail area 215 sq.ft
Genoa area 846 sq.ft
Symetric spinnaker area 2239 sq.ft
Gennaker area 2110 sq.ft
Rigging type Ketch Marconi masthead
Rotating spars No
Mast position Keel stepped mast
Spars Mast and boom in Aluminum
Standing rigging 1x19 strand wire
Number of levels of spreaders 3
Spreaders angle 0 °
Nauticat 525's   Performances
Upwind sail area to displacementiThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.
The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size. Upwind : under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 23 it indicates a fast sailboat.
17.03
Downwind sail area to displacementiThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.
The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size. Upwind : under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 23 it indicates a fast sailboat.
32.58
Displacement-Length ratio (DLR)iThe Displacement Length ratio is a figure that points out the boat's weight compared to its waterline length. DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet).
The DLR can be used to compare the relative mass of different sailboats no matter what their length: a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat.
374
Ballast ratioiThe Ballast ratio is an indicator of the stability; it is obtained by dividing the boat's displacement by the weight of the ballast. Since the stability depends also of the hull shape and the position of the center of gravity, only boats with similar ballast arrangements and hull shape should be considered.
Higher the ballast ratio is, greater is the stability.
36 %
Hull speediAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed".
The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34.
8.48 knots
Nauticat 525's   Auxiliary engine
Engine(s) 1
Engine type Inboard engine
Engine 150 HP
Fuel type Diesel
Fuel tank capacity 414.8 gal
Nauticat 525's   Accommodation
Cabin(s) (min/max) 3 / 4
Berth(s) (min/max) 6 / 8
Head(s) (min/max) 2 / 3
Fresh water tank capacity 435.9 gal
Holding tank capacity 64.7 gal
Fridge/ice-box capacity 47.6 gal
Nauticat 525's   Saloon
Maximum headroom 6’ 8”
Nauticat 525's   Fore cabin
Maximum headroom 6’ 4”
Nauticat 525's   Aft cabin
Maximum headroom 6’ 6”

Similar sailboats that might interest you :

Compare4 max.SailboatHull lengthFirst built hull
Nauticat 51550’ 7”1997
Nauticat 44144’ 10”2008
Hallberg-Rassy 5554’ 8”2012
Super Maramu 200052’ 6”2000
Oyster 54 Standard52’ 11”2013
Oyster 545 Standard52’ 11”2013
Swan 54 Standard54’ 1”2016
Amel 5050’ 11”2017
Moody 52 Standard52’1976
Jeanneau 54 Standard51’ 8”2015
Hallberg-Rassy 48 Mk II Standard49’ 2”2014
Amel 5453’ 10”2005
Hanse 545 Standard52’ 10”2009
Hallberg-Rassy 48 MkI49’ 2”2004
Hallberg-Rassy 4648’ 6”1995
^