Boat-Specs.com

Sailboat specifications and datasheets

Sangria deep draft

The Sangria, here in "deep draft" version, is a 25’ monohull sailboat designed by Philippe Harlé. She was built by Jeanneau (France) and made of monolithic fiberglass / polyester. This sailboat was produced between 1969 and 1982 with 2156 hulls completed.

The Sangria is as well listed, on Boat-Specs.com, in version Standard.

Jeanneau Sangria Jeanneau Sangria sailplanJeanneau Sangria layoutJeanneau Sangria sailingJeanneau Sangria accommodationsJeanneau Sangria detail
Sangria's   Main Features
Model Sangria
Version Deep draft
Type of hull Monohull
Category Cruising sailboat
Shipyard
Designer Philippe Harlé
Construction Hull and deck:
monolithic fiberglass / polyester
First built hull 1969
Last built hull 1982
Number of hulls built 2156
Appendages Keel :
Fin without bulb
Helm 1 tiller
Rudder 1 semi-spade rudder
Cockpit Closed aft cockpit
Unsinkable No
Trailerable No
French navigation category 3
Standard public price ex. VAT (indicative only) N/A
Sangria's   Main dimensions
Hull length 25’
Waterline length 19’
Beam (width) 8’ 11”
Waterline beam (width) 7’ 1”
Draft 4’ 11”
Mast height from DWL 34’ 6”
Fore freeboard 3’ 2”
Mid-ship freeboard 2’ 11”
Light displacement 3748 lbs
Maximum displacement 4497 lbs
Ballast weight 1742 lbs
Ballast type Cast iron
French customs tonnage 6.24 Tx
Sangria's   Rig and sails
Upwind sail area 336 sq.ft
Downwind sail area 595 sq.ft
Mainsail area 110 sq.ft
Genoa area 226 sq.ft
Solent area 173 sq.ft
Jib area 108 sq.ft
Stormjib area 54 sq.ft
Symetric spinnaker area 484 sq.ft
Rigging type Sloop Marconi masthead
Rotating spars No
Mast position Deck stepped mast
Spars Mast and boom in Aluminum
Standing rigging 1x19 strand wire continuous
Number of levels of spreaders 1
Spreaders angle 0 °
IiFore triangle height (from mast foot to fore stay attachment) 28’ 8”
JiFore triangle base (from mast foot to bottom of forestay) 10’ 2”
PiMainsail hoist measurement (from tack to head) 22’ 7”
EiMainsail foot measurement (from tack to clew) 8’ 8”
Sangria's   Performances
HN (French rating) 9.5
IOR rating 18.0
Upwind sail area to displacementiThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.
The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size. Upwind : under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 23 it indicates a fast sailboat.
21.94
Downwind sail area to displacementiThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.
The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size. Upwind : under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 23 it indicates a fast sailboat.
38.79
Displacement-Length ratio (DLR)iThe Displacement Length ratio is a figure that points out the boat's weight compared to its waterline length. DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet).
The DLR can be used to compare the relative mass of different sailboats no matter what their length: a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat.
247
Ballast ratioiThe Ballast ratio is an indicator of the stability; it is obtained by dividing the boat's displacement by the weight of the ballast. Since the stability depends also of the hull shape and the position of the center of gravity, only boats with similar ballast arrangements and hull shape should be considered.
Higher the ballast ratio is, greater is the stability.
46 %
Wetted surface 142 sq.ft
Maximum transverse section 8 sq.ft
Hull speediAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed".
The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34.
5.85 knots
Sangria's   Auxiliary engine
Engine(s) 1
Engine type Inboard engine
Engine 8 HP
Fuel type Diesel
Fuel tank capacity 7.4 gal
Sangria's   Accommodation
Fresh water tank capacity 13.2 gal
Maximum headroom 5’ 11”
Galley headroom 5’ 11”
Sangria's   Saloon
Maximum headroom 5’ 7”
Sangria's   Fore cabin
Maximum headroom 4’ 7”

Similar sailboats that might interest you :

Compare4 max.SailboatHull lengthFirst built hull
Westerly Centaur Sloop25’ 11”1969
Griffon 26 Fin keel26’1979
Oyster 2626’ 2”1978
Kelt 8m Deep draft26’ 2”1977
Kelt 7.60 Keel and centerboard24’ 11”1979
Fantasia 27 Keel and centerboard25’ 4”1982
Super Daïmio Deep draft27’ 7”1975
Trident 80 Shoal draft26’ 2”1975
Jouët 2423’ 7”1977
Elite 25 Fin keel23’ 7”1982
Feeling 720 NV Fin keel23’ 7”1982
Dufour 2800 Deep draft27’1977
Dufour 1800 Deep draft24’ 11”1979
Gib'Sea 262 Deep draft25’ 4”1989
Albin Viggen23’ 4”1966
^