Detailed sailboat specifications and datasheets since 2015
MetricSI (m)
Imperial & Metricboth
ImperialIMP (ft)

Impression 45 Shoal draft

Sailboat specifications

The Impression 45 is a 42’8” (13m) cruising sailboat designed by Humphreys Yacht Design (United Kingdom). She is built since 2015 by Elan Yachts (Slovenia). The Shoal draft version features a shorter keel to grant access to shallow areas.

The Impression 45 is as well listed, on Boat-Specs.com, in Deep draft version (see all the versions compared).

Impression 45's main features

Model
Impression 45
Version
Shoal draft
Hull type
Monohull
Category
Offshore cruising sailboat
Sailboat builder
Sailboat designer
Sailboat range
Country
Slovenia
Construction
GRP (glass reinforced polyester):
- Hull: Sandwich fiberglass polyester (vacuum infusion)
- Deck: Sandwich fiberglass polyester (vacuum infusion)
First built hull
2015
Last built hull
Still in production
Appendages
Keel : L-shaped keel (with bulb)
Helm
Twin helm wheels
Rudder
Single spade rudder
Unsinkable
No
Trailerable
No
EC design category
 iThe CE design category indicates the ability to cope with certain weather conditions (the sailboat is designed for these conditions)

A: Wind < force 9, Waves < 10m
B: Wind < force 8, Waves < 8m
C: Wind < force 6, Waves < 4m
D: Wind < force 4, Waves < 0,5m
A
Standard public price ex. VAT (indicative only)
About 
200 000
 (2017)

Impression 45's main dimensions

Overall length
45’ 5”13.85 m
Hull length
42’ 8”13 m
Waterline length
37’ 6”11.44 m
Beam (width)
13’ 8”4.18 m
Draft
5’ 2”1.6 m
Mast height from DWL
64’19.5 m
Light displacement (MLC)
23281 lb10560 kg
Ballast weight
7606 lb3450 kg

Impression 45's rig and sails

Upwind sail area
1068 ft²99.26 m²
Downwind sail area
1962 ft²182.24 m²
Mainsail area
504 ft²46.79 m²
Genoa area
565 ft²52.47 m²
Gennaker area
1458 ft²135.45 m²
I
 iFore triangle height (from mast foot to fore stay top attachment)
52’ 2”15.9 m
J
 iFore triangle base (from mast foot to bottom of forestay)
15’ 8”4.78 m
P
 iMainsail hoist measurement (from tack to head)
48’ 7”14.8 m
E
 iMainsail foot measurement (from tack to clew)
17’ 7”5.37 m
Rigging type
Sloop Marconi fractional
Mast configuration
Deck stepped mast
Rotating spars
No
Number of levels of spreaders
2
Spreaders angle
Swept-back
Spars construction
Aluminum spars
Standing rigging
1x19 strand wire

Impression 45's performances

Upwind sail area to displacement
 iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.

The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size.

Upwind: under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 25 it indicates a fast sailboat.
222 ft²/T20.62 m²/T
Downwind sail area to displacement
 iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.

The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size.
408 ft²/T37.86 m²/T
Displacement-length ratio (DLR)
 iThe Displacement Length Ratio (DLR) is a figure that points out the boat's weight compared to its waterline length. The DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet).
The DLR can be used to compare the relative mass of different sailboats no matter what their length:

a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat.
200
Ballast ratio
 iThe Ballast ratio is an indicator of stability; it is obtained by dividing the boat's displacement by the mass of the ballast. Since the stability depends also of the hull shapes and the position of the center of gravity, only the boats with similar ballast arrangements and hull shapes should be compared.

The higher the ballast ratio is, the greater is the stability.
33 %
Critical hull speed
 iAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed".
The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34.
8.21 knots

Impression 45's auxiliary engine

Engine(s)
1 inboard engine
Engine(s) power (min./max.)
50 HP / 75 HP
Fuel type
Diesel
Fuel tank capacity
56.8 gal215 liters

Impression 45's accommodations and layout

Cockpit
Open aft cockpit
Cabin(s) (min./max.)
2 / 4
Berth(s) (min./max.)
4 / 10
Head(s)
2
Freshwater tank capacity
136.3 gal516 liters
Have you spotted incorrect data?  You can report it in the forum or contact the webmaster

Similar sailboats that may interest you:


Sailboats
First built hull
Hull length
Moody 41 Aft Shoal draft (Moody)
2009
41’ 8”12.7 m
Impression 45 Deep draft (Elan Yachts)
2015
42’ 8”13 m
Hanse 455 Shoal draft (Hanse)
2014
44’ 6”13.55 m
Bavaria Cruiser 45 Shoal draft (Bavaria Yachts)
2010
44’ 7”13.6 m
Bavaria Cruiser 46 Shoal draft (Bavaria Yachts)
2014
44’ 7”13.6 m
Super Maramu (Amel)
1988
52’ 6”16 m
Vision 46 Shoal draft (Bavaria Yachts)
2013
44’ 11”13.7 m
Sun Odyssey 449 Shoal draft (Jeanneau)
2016
42’ 7”12.99 m
Vision 42 Shoal draft (Bavaria Yachts)
2012
41’12.5 m
Amel 50 (Amel)
2017
50’ 11”15.51 m
Sun Odyssey 440 Shoal draft (Jeanneau)
2017
41’ 6”12.64 m
Moody 45 Aft Shoal draft (Moody)
2010
45’13.72 m
Hanse 458 Shoal draft (Hanse)
2018
44’ 6”13.55 m
Impression 45.1 Shoal draft (Elan Yachts)
2019
42’ 8”13 m
Dufour 430 Shoal draft (Dufour)
2019
41’12.5 m
Boat-Specs.com uses cookies to improve user experience. By using our website you consent to all cookies in accordance with our Cookie Policy.

Read more