Sailboat specifications and datasheets

Catalina 34 MkI wing keel

The Catalina 34 MkI, here in "wing keel" version, is a 34’6” monohull sailboat designed by Frank Butler. She was built by Catalina Yachts (United States) and made of GRP (glass reinforced polyester). This sailboat was produced between 1985 and 1996 with about 1400 hulls completed.

The Catalina 34 MkI is as well listed, on, in version Fin keel and Tall rig.

Catalina Yachts Catalina 34 MkI Catalina Yachts Catalina 34 MkI sailplanCatalina Yachts Catalina 34 MkI layoutCatalina Yachts Catalina 34 MkI sailingCatalina Yachts Catalina 34 MkI accommodations
Catalina 34 MkI's   Main Features
Model Catalina 34 MkI
Version Wing keel
Type of hull Monohull
Category Cruising sailboat
Designer Frank Butler
Construction GRP (glass reinforced polyester)
First built hull 1985
Last built hull 1996
Number of hulls built About 1400
Appendages Keel :
Wing keel
Helm 1 wheel
Rudder 1 spade rudder
Cockpit Open aft cockpit
Unsinkable No
Trailerable No
Standard public price ex. VAT (indicative only) N/A
Catalina 34 MkI's   Main dimensions
Hull length 34’ 6”
Waterline length 29’ 10”
Beam (width) 11’ 8”
Draft 4’ 4”
Light displacement 12533 lbs
Ballast weight 5593 lbs
Ballast type Cast iron
Catalina 34 MkI's   Rig and sails
Upwind sail area 528 sq.ft
Rigging type Sloop Marconi masthead
Rotating spars No
Mast position Keel stepped mast
Spars Mast and boom in Aluminum
Standing rigging 1x19 strand wire
Number of levels of spreaders 1
Spreaders angle 0 °
IiFore triangle height (from mast foot to fore stay attachment) 44’
JiFore triangle base (from mast foot to bottom of forestay) 13’ 6”
PiMainsail hoist measurement (from tack to head) 38’ 6”
EiMainsail foot measurement (from tack to clew) 12’
Catalina 34 MkI's   Performances
Upwind sail area to displacementiThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.
The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size. Upwind : under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 23 it indicates a fast sailboat.
Displacement-Length ratio (DLR)iThe Displacement Length ratio is a figure that points out the boat's weight compared to its waterline length. DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet).
The DLR can be used to compare the relative mass of different sailboats no matter what their length: a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat.
Ballast ratioiThe Ballast ratio is an indicator of the stability; it is obtained by dividing the boat's displacement by the weight of the ballast. Since the stability depends also of the hull shape and the position of the center of gravity, only boats with similar ballast arrangements and hull shape should be considered.
Higher the ballast ratio is, greater is the stability.
45 %
Hull speediAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed".
The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34.
7.32 knots
Catalina 34 MkI's   Auxiliary engine
Engine(s) 1
Engine type Inboard engine
Engine (min/max) 21 HP / 30 HP
Fuel type Diesel
Catalina 34 MkI's   Accommodation
Cabin(s) 2
Berth(s) (min/max) 4 / 6
Head(s) 1

Similar sailboats that might interest you :

Compare4 max.SailboatHull lengthFirst built hull
Catalina 36 MkI Wing keel36’ 4”1982
Catalina 34 MkII Wing keel34’ 6”1996
Catalina 36 MkII Wing keel36’ 4”1994
Sun Rise 35 Keel and centerboard33’ 7”1984
Sun Odyssey 36 Shoal draft35’ 5”1989
Sun Rise 34 Keel and centerboard33’1984
Catalina 380 Wing keel38’ 6”1987
First 35S5 Wing keel34’ 10”1988
First 35S5 Fin keel34’ 10”1988
Catalina 350 MkII Wing keel35’ 2”2007
Sun Shine 38 Team / Fin keel36’ 8”1982
X-362 Classic35’ 2”1998
Océanis 331 Keel and centerboard32’ 10”1999
Océanis 343 Clipper Shoal draft34’ 1”2004
Océanis 343 Clipper Keel and centerboard34’ 1”2004