Boat-Specs.com

Sailboat specifications and datasheets

X-46 deep draft

The X-46, here in "deep draft" version, is a 46’ monohull sailboat designed by Niels Jeppesen. She was built by X-Yachts (Denmark) and made of sandwich fiberglass / polyester with galvanised steel frame. This sailboat was produced between 2003 and 2010 with 75 hulls completed and has been awarded the title of "Cruising World - Boat of the Year - Category: Performance Cruiser over 45'" in 2006.

The X-46 is as well listed, on Boat-Specs.com, in version Standard and Shoal draft.

X-Yachts X-46 X-Yachts X-46 sailplanX-Yachts X-46 layoutX-Yachts X-46 layoutX-Yachts X-46 accommodations
X-46's   Main Features
Model X-46
Version Deep draft
Type of hull Monohull
Category Offshore cruiser-racer sailboat
Shipyard
Designer Niels Jeppesen
Award 2006 Cruising World - Boat of the Year - Category: Performance Cruiser over 45'
Construction Hull and deck:
sandwich fiberglass / polyester with galvanised steel frame
First built hull 2003
Last built hull 2010
Number of hulls built 75
Appendages Keel :
Fin with bulb
Helm 1 wheel
Rudder 1 spade rudder
Cockpit Closed aft cockpit
Unsinkable No
Trailerable No
EC certification A
Standard public price ex. VAT (indicative only) N/A
X-46's   Main dimensions
Hull length 46’
Waterline length 40’ 5”
Beam (width) 13’ 7”
Draft 7’ 11”
Light displacement 22928 lbs
Ballast weight 9921 lbs
Ballast type Cast iron fin with lead bulb
X-46's   Rig and sails
Upwind sail area 1364 sq.ft
Downwind sail area 2359 sq.ft
Mainsail area 680 sq.ft
Genoa area 684 sq.ft
Symetric spinnaker area 1679 sq.ft
Rigging type Sloop Marconi 9/10
Rotating spars No
Mast position Keel stepped mast
Spars Mast and boom in Aluminum
Number of levels of spreaders 3
Spreaders angle Swept-back
IiFore triangle height (from mast foot to fore stay attachment) 60’ 6”
JiFore triangle base (from mast foot to bottom of forestay) 16’ 10”
PiMainsail hoist measurement (from tack to head) 57’ 8”
EiMainsail foot measurement (from tack to clew) 20’ 6”
X-46's   Performances
HN (French rating) 33.0
Upwind sail area to displacementiThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.
The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size. Upwind : under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 23 it indicates a fast sailboat.
26.59
Downwind sail area to displacementiThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.
The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size. Upwind : under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 23 it indicates a fast sailboat.
46.01
Displacement-Length ratio (DLR)iThe Displacement Length ratio is a figure that points out the boat's weight compared to its waterline length. DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet).
The DLR can be used to compare the relative mass of different sailboats no matter what their length: a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat.
158
Ballast ratioiThe Ballast ratio is an indicator of the stability; it is obtained by dividing the boat's displacement by the weight of the ballast. Since the stability depends also of the hull shape and the position of the center of gravity, only boats with similar ballast arrangements and hull shape should be considered.
Higher the ballast ratio is, greater is the stability.
43 %
Hull speediAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed".
The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34.
8.51 knots
X-46's   Auxiliary engine
Engine(s) 1
Engine type Inboard engine
Engine (min/max) 55 HP / 75 HP
Fuel type Diesel
Fuel tank capacity 52.8 gal
X-46's   Accommodation
Cabin(s) (min/max) 3 / 4
Berth(s) (min/max) 8 / 10
Head(s) 2
Fresh water tank capacity 100.4 gal
Fridge/ice-box capacity 26.4 gal
Chart table 3’ 5” x 2’ 1”
Maximum headroom 6’ 5”
X-46's   Fore cabin
Berth length 6’ 8”
Berth width 5’ 11”
X-46's   Aft cabin
Berth length 6’ 11”
Berth width 4’ 5”

Similar sailboats that might interest you :

Compare4 max.SailboatHull lengthFirst built hull
Grand Soleil 45 - J&V Standard44’ 6”2004
First 45 Standard44’ 11”2007
X-44244’ 4”1993
Dehler 45 Standard44’ 11”2010
First 47.7 Deep draft47’ 7”1999
Grand Soleil 46.3 Medium draft45’ 11”1997
X-48247’ 7”1996
Dufour 45E Performance44’ 7”2010
X-43 Standard42’ 5”2003
First 44.7 Standard43’ 10”2004
J/13343’2004
IMX 4545’ 1”2002
Grand Soleil 43 - B&C Deep draft42’ 6”2006
First 50 Standard43’ 6”2006
Grand Soleil 50 - J&V Shoal draft48’ 11”2004
^