Boat-Specs.com

Sailboat specifications and datasheets

Hunter 33 - 2004 shoal draft

The Hunter 33 - 2004, here in "shoal draft" version, is a 33’1” monohull sailboat designed by Hunter Design and Glenn Henderson. She was built by Marlow Hunter (United States) and made of monolithic bottom, sandwich sides and deck: balsa / fiberglass / polyester with Kevlar reinforcements. This sailboat was produced between 2004 and 2012.

The Hunter 33 - 2004 is as well listed, on Boat-Specs.com, in version Deep draft and Furling mainsail.

Marlow Hunter Hunter 33 - 2004 Marlow Hunter Hunter 33 - 2004 layoutMarlow Hunter Hunter 33 - 2004 sailingMarlow Hunter Hunter 33 - 2004 accommodationsMarlow Hunter Hunter 33 - 2004 accommodationsMarlow Hunter Hunter 33 - 2004 accommodationsMarlow Hunter Hunter 33 - 2004 accommodations
Hunter 33 - 2004's   Main Features
Model Hunter 33 - 2004
Version Shoal draft
Type of hull Monohull
Category Cruising sailboat
Shipyard
Designer Hunter Design
Glenn Henderson
Construction Hull:
monolithic bottom, sandwich sides and deck: balsa / fiberglass / polyester with Kevlar reinforcements
Deck:
sandwich balsa / fiberglass / polyester
First built hull 2004
Last built hull 2012
Appendages Keel :
Wing keel
Helm 1 wheel
Rudder 1 spade rudder
Cockpit Open aft cockpit with closing system
Unsinkable No
Trailerable No
EC certification A
Standard public price ex. VAT (indicative only) N/A
Hunter 33 - 2004's   Main dimensions
Length overall 33’ 6”
Hull length 33’ 1”
Waterline length 29’ 5”
Beam (width) 11’ 6”
Draft 4’ 6”
Mast height from DWL 46’ 7”
Light displacement 10410 lbs
Ballast weight 3578 lbs
Ballast type Cast iron
Hunter 33 - 2004's   Rig and sails
Upwind sail area 625 sq.ft
Rigging type Sloop Marconi
Rotating spars No
Mast position Deck stepped mast
Spars Mast and boom in Aluminum
Standing rigging 1x19 strand wire
Number of levels of spreaders 2
Spreaders angle Swept-back (Bergström)
IiFore triangle height (from mast foot to fore stay attachment) 37’ 5”
JiFore triangle base (from mast foot to bottom of forestay) 10’ 10”
PiMainsail hoist measurement (from tack to head) 36’ 5”
EiMainsail foot measurement (from tack to clew) 13’ 10”
Hunter 33 - 2004's   Performances
Upwind sail area to displacementiThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.
The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size. Upwind : under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 23 it indicates a fast sailboat.
20.64
Displacement-Length ratio (DLR)iThe Displacement Length ratio is a figure that points out the boat's weight compared to its waterline length. DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet).
The DLR can be used to compare the relative mass of different sailboats no matter what their length: a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat.
185
Ballast ratioiThe Ballast ratio is an indicator of the stability; it is obtained by dividing the boat's displacement by the weight of the ballast. Since the stability depends also of the hull shape and the position of the center of gravity, only boats with similar ballast arrangements and hull shape should be considered.
Higher the ballast ratio is, greater is the stability.
34 %
Hull speediAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed".
The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34.
7.27 knots
Hunter 33 - 2004's   Auxiliary engine
Engine(s) 1
Engine type Inboard engine
Engine (min/max) 21 HP / 29 HP
Fuel type Diesel
Fuel tank capacity 25.1 gal
Hunter 33 - 2004's   Accommodation
Cabin(s) 2
Berth(s) 6
Fresh water tank capacity 49.9 gal
Water heater capacity 5 gal
Holding tank capacity 25.1 gal
Maximum headroom 6’ 4”

Similar sailboats that might interest you :

Compare4 max.SailboatHull lengthFirst built hull
Marlow Hunter 33 Shoal draft33’ 1”2011
Bénéteau 343 Deep draft34’ 1”2004
Océanis 343 Clipper Deep draft34’ 1”2004
Marlow Hunter 31 Deep draft31’ 11”2015
Bénéteau 323 Shoal draft32’2003
Océanis 323 Clipper Shoal draft32’2003
Sun Odyssey 33i Performance32’2008
Océanis 331 Fin keel32’ 10”1999
Hunter 36 - 2011 Shoal draft34’ 7”2011
Sun Odyssey 349 Performance32’ 8”2013
Bavaria Cruiser 32 Standard32’2010
Hanse 345 Standard32’ 10”2012
Sun Odyssey 32i Deep draft31’2005
Hallberg-Rassy 34233’ 11”2010
Dufour 350 Grand Large32’ 8”2014
^