Boat-Specs.com

Sailboat specifications and datasheets

Impression 40 deep draft

The Impression 40, here in "deep draft" version, is a 37’8” monohull sailboat designed by Rob Humphreys. She was built by Elan Yachts (Slovenia) and made of sandwich fiberglass / polyester (composite infusion). The production started in 2014 .

The Impression 40 belongs to the Impression range. The Impression 40 is as well listed, on Boat-Specs.com, in version Shoal draft.

Elan Yachts  Impression 40 Elan Yachts  Impression 40 sailplanElan Yachts  Impression 40 layoutElan Yachts  Impression 40 layoutElan Yachts  Impression 40 layoutElan Yachts  Impression 40 layoutElan Yachts  Impression 40 sailingElan Yachts  Impression 40 sailingElan Yachts  Impression 40 sailingElan Yachts  Impression 40 sailingElan Yachts  Impression 40 sailingElan Yachts  Impression 40 sailingElan Yachts  Impression 40 sailingElan Yachts  Impression 40 accommodationsElan Yachts  Impression 40 accommodations
Impression 40's   Main Features
Model Impression 40
Version Deep draft
Type of hull Monohull
Category Offshore cruising sailboat
Shipyard
Designer Rob Humphreys
Range Impression
Construction Hull and deck:
sandwich fiberglass / polyester (composite infusion)
First built hull 2014
Last built hull Still in production
Appendages Keel :
L-shaped keel (with bulb)
Helm 2 wheels
Rudder 1 spade rudder
Cockpit Open aft cockpit with closing system
Unsinkable No
Trailerable No
EC certification A
Standard public price ex. VAT (indicative only) About
154 000
(2017)
Impression 40's   Main dimensions
Length overall 39’
Hull length 37’ 8”
Waterline length 32’ 10”
Beam (width) 12’ 10”
Draft 5’ 11”
Mast height from DWL 57’ 8”
Light displacement 18448 lbs
Ballast weight 5465 lbs
Impression 40's   Rig and sails
Upwind sail area 818 sq.ft
Downwind sail area 1463 sq.ft
Mainsail area 408 sq.ft
Genoa area 410 sq.ft
Gennaker area 1055 sq.ft
Rigging type Sloop Marconi fractional
Rotating spars No
Mast position Deck stepped mast
Spars Mast and boom in Aluminum
Standing rigging 1x19 strand wire
Number of levels of spreaders 2
Spreaders angle Swept-back
IiFore triangle height (from mast foot to fore stay attachment) 45’ 10”
JiFore triangle base (from mast foot to bottom of forestay) 12’ 10”
PiMainsail hoist measurement (from tack to head) 42’ 8”
EiMainsail foot measurement (from tack to clew) 15’ 11”
Impression 40's   Performances
Upwind sail area to displacementiThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.
The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size. Upwind : under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 23 it indicates a fast sailboat.
18.44
Downwind sail area to displacementiThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.
The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size. Upwind : under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 23 it indicates a fast sailboat.
32.97
Displacement-Length ratio (DLR)iThe Displacement Length ratio is a figure that points out the boat's weight compared to its waterline length. DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet).
The DLR can be used to compare the relative mass of different sailboats no matter what their length: a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat.
237
Ballast ratioiThe Ballast ratio is an indicator of the stability; it is obtained by dividing the boat's displacement by the weight of the ballast. Since the stability depends also of the hull shape and the position of the center of gravity, only boats with similar ballast arrangements and hull shape should be considered.
Higher the ballast ratio is, greater is the stability.
30 %
Hull speediAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed".
The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34.
7.68 knots
Impression 40's   Auxiliary engine
Engine(s) 1
Engine type Inboard engine
Engine (min/max) 29 HP / 39 HP
Fuel type Diesel
Fuel tank capacity 38.6 gal
Impression 40's   Accommodation
Cabin(s) (min/max) 2 / 3
Berth(s) (min/max) 4 / 8
Head(s) (min/max) 1 / 2
Fresh water tank capacity 63.4 gal

Similar sailboats that might interest you :

Compare4 max.SailboatHull lengthFirst built hull
Hanse 418 Medium draft39’ 4”2017
Hallberg-Rassy 372 Standard37’ 2”2010
Hanse 388 Medium draft36’ 1”2017
Marlow Hunter 37 Shoal draft37’ 6”2014
Dufour 382 Grand Large Standard36’2014
Bavaria Cruiser 41 Standard39’ 4”2011
Catalina 390 Fin keel38’ 8”2001
Nauticat 38538’ 2”2006
Bavaria Cruiser 36 Standard35’ 10”2010
Bavaria 40 Cruiser - Farr Standard39’ 4”2010
Marlow Hunter 42 SS Shoal draft40’2017
Catalina 375 Fin keel37’ 4”2008
Nordship 380 DS38’ 1”2007
Hanse 385 Standard35’ 10”2011
Bavaria Cruiser 37 Standard35’ 10”2014
^