Boat-Specs.com

Sailboat specifications and datasheets

Super Maramu 2000

The Super Maramu 2000 is a 52’6” monohull sailboat designed by Henri Amel and Jacques Carteau. She was built by Amel (France) and made of GRP (glass reinforced polyester). This sailboat was produced between 2000 and 2007 with 247 hulls completed.
Amel Super Maramu 2000 Amel Super Maramu 2000 sailplanAmel Super Maramu 2000 sailplanAmel Super Maramu 2000 layoutAmel Super Maramu 2000 layoutAmel Super Maramu 2000 layoutAmel Super Maramu 2000 sailingAmel Super Maramu 2000 sailingAmel Super Maramu 2000 sailing
Super Maramu 2000's   Main Features
Model Super Maramu 2000
Type of hull Monohull
Category Offshore cruising sailboat
Shipyard
Designer Henri Amel
Jacques Carteau
Construction GRP (glass reinforced polyester)
First built hull 2000
Last built hull 2007
Number of hulls built 247
Appendages Keel :
L-shaped keel (with bulb)
Helm 1 wheel
Rudder 1 rudder on skeg
Cockpit Central cockpit
Unsinkable No
Trailerable No
EC certification A
Standard public price ex. VAT (indicative only) N/A
Super Maramu 2000's   Main dimensions
Hull length 52’ 6”
Waterline length 41’ 4”
Beam (width) 15’ 1”
Draft 6’ 8”
Mast height from DWL 65’ 8”
Light displacement 35274 lbs
Ballast weight 12125 lbs
Ballast type Lead
Super Maramu 2000's   Rig and sails
Upwind sail area 1281 sq.ft
Downwind sail area 1528 sq.ft
Mainsail area 377 sq.ft
Mizzen sail area 205 sq.ft
Mizzen staysail area 215 sq.ft
Genoa area 700 sq.ft
Jib area 215 sq.ft
Symetric spinnaker area 732 sq.ft
Rigging type Ketch Marconi (in-mast furling mainsail) masthead
Rotating spars No
Mast position Deck stepped mast
Spars Mast and boom in Aluminum
Standing rigging 1x19 strand wire discontinuous
Number of levels of spreaders 2
Spreaders angle 0 °
Super Maramu 2000's   Performances
Upwind sail area to displacementiThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.
The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size. Upwind : under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 23 it indicates a fast sailboat.
18.74
Downwind sail area to displacementiThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.
The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size. Upwind : under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 23 it indicates a fast sailboat.
19.21
Displacement-Length ratio (DLR)iThe Displacement Length ratio is a figure that points out the boat's weight compared to its waterline length. DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet).
The DLR can be used to compare the relative mass of different sailboats no matter what their length: a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat.
226
Ballast ratioiThe Ballast ratio is an indicator of the stability; it is obtained by dividing the boat's displacement by the weight of the ballast. Since the stability depends also of the hull shape and the position of the center of gravity, only boats with similar ballast arrangements and hull shape should be considered.
Higher the ballast ratio is, greater is the stability.
34 %
Hull speediAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed".
The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34.
8.62 knots
Super Maramu 2000's   Auxiliary engine
Engine(s) 1
Engine type Inboard engine
Engine 100 HP
Fuel type Diesel
Fuel tank capacity 158.5 gal
Super Maramu 2000's   Accommodation
Cabin(s) 2
Berth(s) (min/max) 6 / 8
Head(s) 2
Fresh water tank capacity 264.2 gal
Maximum headroom 6’ 7”

Similar sailboats that might interest you :

Compare4 max.SailboatHull lengthFirst built hull
Amel 5453’ 10”2005
Super Maramu52’ 6”1988
Oyster 54 Standard52’ 11”2013
Oyster 545 Standard52’ 11”2013
Amel 5050’ 11”2017
Hallberg-Rassy 48 MkI49’ 2”2004
Amel 5554’ 11”2012
Hallberg-Rassy 5554’ 8”2012
Hanse 545 Standard52’ 10”2009
Southerly 53554’ 7”2014
Jeanneau 54 Standard51’ 8”2015
Bavaria Cruiser 55 Standard53’2010
Hallberg-Rassy 48 Mk II Standard49’ 2”2014
Southerly 54054’ 7”2017
Hallberg-Rassy 4648’ 6”1995
^