Boat-Specs.com

Sailboat specifications and datasheets

X-40 sport

The X-40, here in "sport" version, is a 40’ monohull sailboat designed by Niels Jeppesen. She was built by X-Yachts (Denmark) and made of sandwich fiberglass / polyester with galvanised steel frame. This sailboat was produced between 2004 and 2010 with 140 hulls completed.

The X-40 is as well listed, on Boat-Specs.com, in version Standard and Shoal draft.

X-Yachts X-40 X-Yachts X-40 sailplanX-Yachts X-40 layoutX-Yachts X-40 sailingX-Yachts X-40 sailingX-Yachts X-40 sailingX-Yachts X-40 accommodationsX-Yachts X-40 accommodations
X-40's   Main Features
Model X-40
Version Sport
Type of hull Monohull
Shipyard
Designer Niels Jeppesen
Construction Hull and deck:
sandwich fiberglass / polyester with galvanised steel frame
First built hull 2004
Last built hull 2010
Number of hulls built 140
Appendages Keel :
Fin with bulb
Helm 1 wheel
Rudder 1 spade rudder
Unsinkable No
Trailerable No
EC certification A
Standard public price ex. VAT (indicative only) N/A
X-40's   Main dimensions
Hull length 40’
Waterline length 35’ 1”
Beam (width) 12’ 6”
Draft 7’ 11”
Light displacement 16424 lbs
Ballast weight 7055 lbs
Ballast type Cast iron fin with lead bulb
French customs tonnage 15.60 Tx
X-40's   Rig and sails
Upwind sail area 1068 sq.ft
Downwind sail area 1845 sq.ft
Mainsail area 545 sq.ft
Genoa area 523 sq.ft
Solent area 419 sq.ft
Jib area 329 sq.ft
Symetric spinnaker area 1300 sq.ft
Rigging type Sloop Marconi 9/10
Spars Mast and boom in Aluminum
Number of levels of spreaders 3
Spreaders angle Swept-back
IiFore triangle height (from mast foot to fore stay attachment) 53’ 10”
JiFore triangle base (from mast foot to bottom of forestay) 14’ 2”
PiMainsail hoist measurement (from tack to head) 51’ 6”
EiMainsail foot measurement (from tack to clew) 18’ 5”
X-40's   Performances
HN (French rating) 29.0
Upwind sail area to displacementiThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.
The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size. Upwind : under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 23 it indicates a fast sailboat.
26.01
Downwind sail area to displacementiThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.
The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size. Upwind : under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 23 it indicates a fast sailboat.
44.93
Displacement-Length ratio (DLR)iThe Displacement Length ratio is a figure that points out the boat's weight compared to its waterline length. DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet).
The DLR can be used to compare the relative mass of different sailboats no matter what their length: a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat.
172
Ballast ratioiThe Ballast ratio is an indicator of the stability; it is obtained by dividing the boat's displacement by the weight of the ballast. Since the stability depends also of the hull shape and the position of the center of gravity, only boats with similar ballast arrangements and hull shape should be considered.
Higher the ballast ratio is, greater is the stability.
43 %
Hull speediAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed".
The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34.
7.94 knots
X-40's   Auxiliary engine
Engine(s) 1
Engine type Inboard engine
Engine (min/max) 40 HP
Fuel tank capacity 23.8 gal
X-40's   Accommodation
Cabin(s) (min/max) 2 / 3
Berth(s) (min/max) 4 / 8
Head(s) (min/max) 1 / 2
Fresh water tank capacity 47.6 gal
Chart table 3’ 1” x 2’ 2”
Maximum headroom 6’ 2”
Galley headroom 6’ 2”
Head headroom 6’
X-40's   Saloon
Maximum headroom 6’ 1”
Berth length 6’ 7”
Berth width 2’ 10”
X-40's   Fore cabin
Maximum headroom 6’
Berth length 7’ 2”
Berth width 5’ 2”
X-40's   Aft cabin
Maximum headroom 6’ 2”
Berth length 6’ 7”
Berth width 4’ 7”

Similar sailboats that might interest you :

Compare4 max.SailboatHull lengthFirst built hull
X-4140’ 6”2006
X-40 40’2004
X-40 40’2004
IMX 4039’ 8”2000
Xc 38 38’2010
Xc 42 42’2009
Xp 38 38’2011
Xp 38 Deep draft38’2011
X-43 42’ 5”2003
X-37 37’ 2”2004
X-37 37’ 2”2004
X-37 Sport37’ 2”2004
A40 RC39’ 2”2003
Hanse 400 Epoxy39’ 4”2006
Hanse 400 39’ 4”2006
Elan 410 Deep draft40’ 4”2007
Elan 410 40’ 4”2007
J/122e 40’2006
J/122e 40’2006
Hallberg-Rassy 4040’ 8”2002
^