Boat-Specs.com

Sailboat specifications and datasheets

X-332 sport

The X-332, here in "sport" version, is a 33’ monohull sailboat designed by Niels Jeppesen. She was built by X-Yachts (Denmark) and made of sandwich fiberglass / polyester with galvanised steel frame. This sailboat was produced between 1994 and 2005 with 432 hulls completed.

The X-332 is as well listed, on Boat-Specs.com, in version Standard.

X-Yachts X-332 X-Yachts X-332 sailplanX-Yachts X-332 sailplanX-Yachts X-332 layoutX-Yachts X-332 sailingX-Yachts X-332 sailingX-Yachts X-332 accommodations
X-332's   Main Features
Model X-332
Version Sport
Type of hull Monohull
Shipyard
Designer Niels Jeppesen
Construction Hull and deck:
sandwich fiberglass / polyester with galvanised steel frame
First built hull 1994
Last built hull 2005
Number of hulls built 432
Appendages Keel :
Fin with bulb
Helm 1 tiller (helm wheel in option)
Rudder 1 spade rudder
Unsinkable No
Trailerable No
EC certification A
Standard public price (indicative only) N/A
X-332's   Main dimensions
Length overall 33’ 10”
Hull length 33’
Waterline length 28’ 11”
Beam (width) 10’ 10”
Draft 7’ 1”
Light displacement 9039 lbs
Ballast weight 3086 lbs
Ballast type Cast iron fin with lead bulb
French customs tonnage 10.29 Tx
X-332's   Rig and sails
Upwind sail area 734 sq.ft
Downwind sail area 1177 sq.ft
Mainsail area 383 sq.ft
Genoa area 352 sq.ft
Solent area 251 sq.ft
Jib area 201 sq.ft
Symetric spinnaker area 794 sq.ft
Code 0 area 770 sq.ft
Rigging type Sloop Marconi 9/10
Spars Mast and boom in Aluminum
Standing rigging Single-strand (ROD)
Number of levels of spreaders 2
Spreaders angle Swept-back
IiFore triangle height (from mast foot to fore stay attachment) 43’ 1”
JiFore triangle base (from mast foot to bottom of forestay) 11’ 7”
PiMainsail hoist measurement (from tack to head) 43’ 1”
EiMainsail foot measurement (from tack to clew) 14’ 11”
X-332's   Performances
HN (French rating) 25.0
Upwind sail area to displacementiThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.
The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size. Upwind : under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 23 it indicates a fast sailboat.
26.63
Downwind sail area to displacementiThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.
The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size. Upwind : under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 23 it indicates a fast sailboat.
42.68
Displacement-Length ratio (DLR)iThe Displacement Length ratio is a figure that points out the boat's weight compared to its waterline length. DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet).
The DLR can be used to compare the relative mass of different sailboats no matter what their length: a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat.
170
Ballast ratioiThe Ballast ratio is an indicator of the stability; it is obtained by dividing the boat's displacement by the weight of the ballast. Since the stability depends also of the hull shape and the position of the center of gravity, only boats with similar ballast arrangements and hull shape should be considered.
Higher the ballast ratio is, greater is the stability.
34 %
Hull speediAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed".
The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34.
7.20 knots
X-332's   Auxiliary engine
Engine(s) 1
Engine type Inboard engine
Engine 18 HP
Fuel type Diesel
Fuel tank capacity 14 gal
X-332's   Accommodation
Cabin(s) 2
Berth(s) 6
Head(s) 1
Fresh water tank capacity 31.7 gal
Maximum headroom 6’ 1”
X-332's   Aft cabin
Berth length 6’ 8”
Berth width 4’ 7”

Similar sailboats that might interest you :

Compare4 max.SailboatHull lengthFirst built hull
X-332 Standard33’1994
X-342 Fractionnal rigging33’ 6”1988
X-362 Sport35’ 2”1998
X-362 Classic35’ 2”1998
X-312 Mast head rigging30’ 4”1989
X-99 Mk II32’ 7”1985
X-312 Fractionnal rigging30’ 4”1989
X-302 Mk II29’ 11”1994
X-3534’ 10”2005
X-372 Fractionnal rigging36’ 4”1987
X-34 Standard34’2007
X-34 Shoal draft34’2007
Catalina 34 MkII Fin keel34’ 6”1996
J/105 Standard34’ 5”1991
J/105 Shoal draft34’ 5”1991
JOD 35 (Jeanneau One Design)34’ 10”1990
Océanis 311 Fin keel31’ 2”1997
Océanis 311 Keel and centerboard31’ 2”1997
First 31.7 Deep draft31’ 2”1997
First 31.7 Shoal draft31’ 2”1997
^