Boat-Specs.com

Sailboat specifications and datasheets

X-312 mast head rigging

The X-312, here in "mast head rigging" version, is a 30’4” monohull sailboat designed by Niels Jeppesen. She was built by X-Yachts (Denmark) and made of sandwich fiberglass / polyester with galvanised steel frame. This sailboat was produced between 1989 and 1994 with 64 hulls completed.

The X-312 is as well listed, on Boat-Specs.com, in version Fractionnal rigging.

X-Yachts X-312 X-Yachts X-312 sailplanX-Yachts X-312 layoutX-Yachts X-312 sailingX-Yachts X-312 accommodations
X-312's   Main Features
Model X-312
Version Mast head rigging
Type of hull Monohull
Category Cruiser-racer sailboat
Shipyard
Designer Niels Jeppesen
Construction Hull and deck:
sandwich fiberglass / polyester with galvanised steel frame
First built hull 1989
Last built hull 1994
Number of hulls built 64
Appendages Keel :
Fin without bulb
Helm 1 tiller
Rudder 1 spade rudder
Cockpit Closed aft cockpit
Unsinkable No
Trailerable No
Standard public price ex. VAT (indicative only) N/A
X-312's   Main dimensions
Length overall 30’ 4”
Hull length 30’ 4”
Waterline length 24’ 7”
Beam (width) 9’ 10”
Draft 5’ 7”
Light displacement 7397 lbs
Ballast weight 3638 lbs
Ballast type Cast iron / lead fin
X-312's   Rig and sails
Upwind sail area 546 sq.ft
Downwind sail area 965 sq.ft
Mainsail area 221 sq.ft
Genoa area 325 sq.ft
Solent area 281 sq.ft
Jib area 216 sq.ft
Stormjib area 73 sq.ft
Symetric spinnaker area 744 sq.ft
Rigging type Sloop Marconi masthead
Rotating spars No
Mast position Keel stepped mast
Spars Mast and boom in Aluminum
Number of levels of spreaders 2
IiFore triangle height (from mast foot to fore stay attachment) 38’ 10”
JiFore triangle base (from mast foot to bottom of forestay) 11’ 4”
PiMainsail hoist measurement (from tack to head) 33’ 6”
EiMainsail foot measurement (from tack to clew) 11’ 6”
X-312's   Performances
HN (French rating) 18.0
IOR rating 23.5
Upwind sail area to displacementiThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.
The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size. Upwind : under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 23 it indicates a fast sailboat.
22.61
Downwind sail area to displacementiThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.
The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size. Upwind : under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 23 it indicates a fast sailboat.
39.99
Displacement-Length ratio (DLR)iThe Displacement Length ratio is a figure that points out the boat's weight compared to its waterline length. DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet).
The DLR can be used to compare the relative mass of different sailboats no matter what their length: a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat.
225
Ballast ratioiThe Ballast ratio is an indicator of the stability; it is obtained by dividing the boat's displacement by the weight of the ballast. Since the stability depends also of the hull shape and the position of the center of gravity, only boats with similar ballast arrangements and hull shape should be considered.
Higher the ballast ratio is, greater is the stability.
49 %
Hull speediAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed".
The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34.
6.65 knots
X-312's   Auxiliary engine
Engine(s) 1
Engine type Inboard engine
Engine (min/max) 9 HP / 17 HP
Fuel type Diesel
Fuel tank capacity 11.9 gal
X-312's   Accommodation
Cabin(s) 2
Berth(s) (min/max) 4 / 6
Head(s) 1
Fresh water tank capacity 31.7 gal
Maximum headroom 5’ 11”

Similar sailboats that might interest you :

Compare4 max.SailboatHull lengthFirst built hull
Elite 324 Keel and centerboard31’ 6”1986
Feeling 960 Keel and centerboard31’ 6”1986
Sun Light 30 Keel and centerboard29’ 2”1986
Attalia 32 Keel and centerboard30’ 2”1983
Sun Light 30 Owner / Small draft / Short mast29’ 2”1986
Feeling 326 Shoal draft31’ 4”1987
Elite 326 Shoal draft31’ 4”1987
Feeling 920 Keel and centerboard30’ 4”1981
Elite 32 Keel and centerboard30’ 4”1981
Feeling 326 Deep draft31’ 4”1987
Elite 326 Deep draft31’ 4”1987
Rush Shoal draft30’ 2”1979
Rush Deep draft30’ 2”1979
Arcadia Keel and centerboard28’ 1”1983
Sun Rise 34 Keel and centerboard33’1984
^