Detailed sailboat specifications and datasheets since 2015
MetricSI (m)
Imperial & Metricboth
ImperialIMP (ft)

Optio Fin keel

Sailboat specifications

The Optio is a 29’6” (8.99m) dayboat designed by Berret Racoupeau Yachts Design (France). She is built since 2014 by Wauquiez (France). The Fin keel version adopts a T-shaped keel delivering good performance/price trade-off.

The Optio is as well listed, on Boat-Specs.com, in Swing keel version (see all the versions compared).

Optio's main features

Model
Optio
Version
Fin keel
Hull type
Monohull
Category
Dayboat
Sailboat builder
Sailboat designer
Country
France
Construction
GRP (glass reinforced polyester):
- Hull: Sandwich balsa E-glass vinylester (vacuum infusion)
- Deck: Sandwich balsa E-glass vinylester (vacuum infusion)
First built hull
2014
Last built hull
Still in production
Appendages
Keel : T-shaped keel (with bulb)
Helm
Single tiller
Rudder
Twin spade rudders
Unsinkable
No
Trailerable
Yes
EC design category
 iThe CE design category indicates the ability to cope with certain weather conditions (the sailboat is designed for these conditions)

A: Wind < force 9, Waves < 10m
B: Wind < force 8, Waves < 8m
C: Wind < force 6, Waves < 4m
D: Wind < force 4, Waves < 0,5m
C
Standard public price ex. VAT (indicative only)
About 
94 500
 (2020)

Optio's main dimensions

Hull length
29’ 6”8.99 m
Waterline length
28’ 1”8.57 m
Beam (width)
8’ 4”2.54 m
Draft
7’ 2”2.2 m
Mast height from DWL
43’ 4”13.2 m
Light displacement (MLC)
4409 lb2000 kg
Ballast weight
1984 lb900 kg
Ballast type
Cast iron

Optio's rig and sails

Upwind sail area
468 ft²43.5 m²
Downwind sail area
1039 ft²96.5 m²
Mainsail area
285 ft²26.5 m²
Jib area
183 ft²17 m²
Asymmetric spinnaker area
753 ft²70 m²
Code 0 area
495 ft²46 m²
I
 iFore triangle height (from mast foot to fore stay top attachment)
34’ 11”10.65 m
J
 iFore triangle base (from mast foot to bottom of forestay)
11’ 10”3.6 m
P
 iMainsail hoist measurement (from tack to head)
35’ 11”10.95 m
E
 iMainsail foot measurement (from tack to clew)
11’ 6”3.5 m
Rigging type
Sloop Marconi (square top mainsail) 9/10
Mast configuration
Deck stepped mast
Rotating spars
No
Number of levels of spreaders
2
Spreaders angle
Swept-back
Spars construction
Aluminum spars
Standing rigging
Single-strand (ROD) discontinuous

Optio's performances

Upwind sail area to displacement
 iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.

The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size.

Upwind: under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 25 it indicates a fast sailboat.
295 ft²/T27.4 m²/T
Downwind sail area to displacement
 iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.

The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size.
654 ft²/T60.79 m²/T
Displacement-length ratio (DLR)
 iThe Displacement Length Ratio (DLR) is a figure that points out the boat's weight compared to its waterline length. The DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet).
The DLR can be used to compare the relative mass of different sailboats no matter what their length:

a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat.
90
Ballast ratio
 iThe Ballast ratio is an indicator of stability; it is obtained by dividing the boat's displacement by the mass of the ballast. Since the stability depends also of the hull shapes and the position of the center of gravity, only the boats with similar ballast arrangements and hull shapes should be compared.

The higher the ballast ratio is, the greater is the stability.
45 %
Critical hull speed
 iAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed".
The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34.
7.11 knots

Optio's auxiliary engine

Engine(s)
1 inboard engine
Engine(s) power (min./max.)
9 HP / 14 HP
Fuel type
Diesel
Fuel tank capacity
10.6 gal40 liters

Optio's accommodations and layout

Cockpit
Open aft cockpit
Berth(s) (min./max.)
2 / 4
Head(s)
1
Freshwater tank capacity
13.2 gal50 liters
Holding tank capacity
9.2 gal35 liters
Have you spotted incorrect data?  You can report it in the forum or contact the webmaster

Similar sailboats that may interest you:


Sailboats
First built hull
Hull length
Figaro 2 (Bénéteau)
2003
33’ 2”10.11 m
A27 Fin keel (Archambault)
2012
27’ 5”8.35 m
Figaro 3 (Bénéteau)
2017
32’9.75 m
J/121 (J/Boats)
2017
40’12.2 m
Ofcet 32 SC (Ofcet)
2016
32’ 2”9.8 m
Catalina 275 Sport Fin keel (Catalina Yachts)
2013
27’ 6”8.38 m
Optio Swing keel (Wauquiez)
2014
29’ 6”8.99 m
Dehler 30 OD (Dehler)
2019
30’9.14 m
J/88 (J/Boats)
2013
29’ 2”8.9 m
RM 890 Fin keel (Fora Marine & RM yachts)
2013
29’ 2”8.9 m
Pogo 30 Fin keel (Pogo Structures)
2013
30’9.14 m
Elan 310 Deep draft (Elan Yachts)
2009
30’ 4”9.25 m
Grand Surprise (Archambault & BG Race)
1999
31’ 4”9.54 m
J/100 Standard (J/Boats)
2004
32’ 10”10 m
First 31.7 Deep draft (Bénéteau)
1997
31’ 2”9.5 m
Boat-Specs.com uses cookies to improve user experience. By using our website you consent to all cookies in accordance with our Cookie Policy.

Read more