Detailed sailboat specifications and datasheets since 2015
MetricSI (m)
Imperial & Metricboth
ImperialIMP (ft)

Sun Odyssey 40 DS (Shoal draft) vs Sun Odyssey 40 DS (Standard)

Main featuresSun Odyssey 40 DS Shoal draftSun Odyssey 40 DS Standard
Model
Sun Odyssey 40 DS
Sun Odyssey 40 DS
Version
Shoal draft
Standard
Hull type
Monohull
Monohull
Category
Deck saloon cruising sailboat
Deck saloon cruising sailboat
Sailboat builder
Jeanneau
Jeanneau
Sailboat designer
Sailboat range
Country
France
France
Construction
Hull and deck: GRP (glass reinforced polyester)
Hull and deck: GRP (glass reinforced polyester)
Number of hulls built
About 300
About 300
First built hull
1997
1997
Last built hull
2005
2005
Appendages
Keel : L-shaped keel (with bulb)
Keel : L-shaped keel (with bulb)
Helm
Single helm wheel
Single helm wheel
Rudder
Single spade rudder
Single spade rudder
Unsinkable
No
No
Trailerable
No
No
EC design category
 iThe CE design category indicates the ability to cope with certain weather conditions (the sailboat is designed for these conditions)

A: Wind < force 9, Waves < 10m
B: Wind < force 8, Waves < 8m
C: Wind < force 6, Waves < 4m
D: Wind < force 4, Waves < 0,5m
A
A
Former French navigation category
1
1
 
Main dimensionsSun Odyssey 40 DS Shoal draftSun Odyssey 40 DS Standard
Overall length
40’12.2 m
40’12.2 m
Hull length
38’ 6”11.75 m
38’ 6”11.75 m
Waterline length
33’ 5”10.17 m
33’ 5”10.17 m
Beam (width)
13’3.95 m
13’3.95 m
Draft
4’ 11”1.5 m
6’ 5”1.95 m
Mast height from DWL
58’ 1”17.7 m
58’ 1”17.7 m
Light displacement (MLC)
16932 lb7680 kg
16380 lb7430 kg
Ballast weight
5842 lb2650 kg
5291 lb2400 kg
Ballast type
Cast iron
Cast iron
French customs tonnage
15.70 Tx
15.70 Tx
 
Rig and sailsSun Odyssey 40 DS Shoal draftSun Odyssey 40 DS Standard
Upwind sail area
819 ft²76.1 m²
819 ft²76.1 m²
Downwind sail area
1482 ft²137.7 m²
1482 ft²137.7 m²
Mainsail area
320 ft²29.7 m²
320 ft²29.7 m²
Genoa area
499 ft²46.4 m²
499 ft²46.4 m²
Symmetric spinnaker area
1163 ft²108 m²
1163 ft²108 m²
I
 iFore triangle height (from mast foot to fore stay top attachment)
49’ 8”15.15 m
49’ 8”15.15 m
J
 iFore triangle base (from mast foot to bottom of forestay)
13’ 11”4.23 m
13’ 11”4.23 m
P
 iMainsail hoist measurement (from tack to head)
42’ 10”13.05 m
42’ 10”13.05 m
E
 iMainsail foot measurement (from tack to clew)
15’ 8”4.8 m
15’ 8”4.8 m
Rigging type
Sloop Marconi masthead
Sloop Marconi masthead
Mast configuration
Deck stepped mast
Deck stepped mast
Rotating spars
No
No
Number of levels of spreaders
2
2
Spreaders angle
Swept-back
Swept-back
Spars construction
Aluminum spars
Aluminum spars
Standing rigging
1x19 strand wire
1x19 strand wire
 
PerformancesSun Odyssey 40 DS Shoal draftSun Odyssey 40 DS Standard
Upwind sail area to displacement
 iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.

The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size.

Upwind: under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 25 it indicates a fast sailboat.
210 ft²/T19.55 m²/T
215 ft²/T19.99 m²/T
Downwind sail area to displacement
 iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.

The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size.
381 ft²/T35.37 m²/T
389 ft²/T36.16 m²/T
Displacement-length ratio (DLR)
 iThe Displacement Length Ratio (DLR) is a figure that points out the boat's weight compared to its waterline length. The DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet).
The DLR can be used to compare the relative mass of different sailboats no matter what their length:

a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat.
207
200
Ballast ratio
 iThe Ballast ratio is an indicator of stability; it is obtained by dividing the boat's displacement by the mass of the ballast. Since the stability depends also of the hull shapes and the position of the center of gravity, only the boats with similar ballast arrangements and hull shapes should be compared.

The higher the ballast ratio is, the greater is the stability.
35 %
32 %
Critical hull speed
 iAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed".
The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34.
7.74 knots
7.74 knots
 
Auxiliary engineSun Odyssey 40 DS Shoal draftSun Odyssey 40 DS Standard
Engine(s)
1 inboard engine
1 inboard engine
Engine(s) power
40 HP
40 HP
Fuel type
Diesel
Diesel
Fuel tank capacity
35.9 gal136 liters
35.9 gal136 liters
 
Accommodations and layoutSun Odyssey 40 DS Shoal draftSun Odyssey 40 DS Standard
Cockpit
Closed aft cockpit
Closed aft cockpit
Cabin(s) (min./max.)
2 / 3
2 / 3
Berth(s) (min./max.)
4 / 8
4 / 8
Head(s)
2
2
Freshwater tank capacity
84.5 gal320 liters
84.5 gal320 liters
Fridge/ice-box capacity
44.9 gal170 liters
44.9 gal170 liters
Maximum headroom
6’ 11”2.1 m
6’ 11”2.1 m
Galley headroom
6’ 5”1.95 m
6’ 5”1.95 m
Head headroom
6’ 8”2.03 m
6’ 8”2.03 m
 
SaloonSun Odyssey 40 DS Shoal draftSun Odyssey 40 DS Standard
Maximum headroom
6’ 4”1.93 m
6’ 4”1.93 m
 
Fore cabinSun Odyssey 40 DS Shoal draftSun Odyssey 40 DS Standard
Maximum headroom
6’ 2”1.9 m
6’ 2”1.9 m
Berth length
6’ 11”2.1 m
6’ 11”2.1 m
Berth width (head/feet)
5’ 11”1.8 m / 2’ 1”0.65 m
5’ 11”1.8 m / 2’ 1”0.65 m
 
Aft cabinSun Odyssey 40 DS Shoal draftSun Odyssey 40 DS Standard
Maximum headroom
6’ 11”2.1 m
6’ 11”2.1 m
Berth length
6’ 7”2 m
6’ 7”2 m
Berth width (head/feet)
5’ 8”1.75 m / 4’ 4”1.3 m
5’ 8”1.75 m / 4’ 4”1.3 m
 
Boat-Specs.com uses cookies to improve user experience. By using our website you consent to all cookies in accordance with our Cookie Policy.

Read more