Detailed sailboat specifications and datasheets since 2015
MetricSI (m)
Imperial & Metricboth
ImperialIMP (ft)

Feeling 1090 (Deep draft) vs Feeling 1090 (Shoal draft)

Main featuresFeeling 1090 Deep draftFeeling 1090 Shoal draft
Model
Feeling 1090
Feeling 1090
Version
Deep draft
Shoal draft
Hull type
Monohull
Monohull
Category
Offshore cruising sailboat
Offshore cruising sailboat
Sailboat builder
Kirié
Kirié
Sailboat designer
Sailboat range
Country
France
France
Construction
Hull and deck: GRP (glass reinforced polyester)
Hull and deck: GRP (glass reinforced polyester)
Number of hulls built
About 200
About 200
First built hull
1986
1986
Last built hull
1995
1995
Appendages
Keel : fin without bulb
Keel : fin without bulb
Helm
Single helm wheel
Single helm wheel
Rudder
Single spade rudder
Single spade rudder
Unsinkable
No
No
Trailerable
No
No
Former French navigation category
1
1
 
Main dimensionsFeeling 1090 Deep draftFeeling 1090 Shoal draft
Overall length
36’ 5”11.1 m
36’ 5”11.1 m
Hull length
35’ 6”10.81 m
35’ 6”10.81 m
Waterline length
28’ 11”8.8 m
28’ 11”8.8 m
Beam (width)
11’ 10”3.6 m
11’ 10”3.6 m
Draft
5’ 11”1.8 m
4’ 7”1.4 m
Mast height from DWL
49’ 8”15.14 m
49’ 8”15.14 m
Fore freeboard
3’ 8”1.12 m
3’ 8”1.12 m
Mid-ship freeboard
3’ 4”1 m
3’ 4”1 m
Light displacement (MLC)
10803 lb4900 kg
10803 lb4900 kg
Ballast weight
4409 lb2000 kg
4409 lb2000 kg
Ballast type
Lead
Cast iron
French customs tonnage
10.44 Tx
10.44 Tx
 
Rig and sailsFeeling 1090 Deep draftFeeling 1090 Shoal draft
Upwind sail area
764 ft²71 m²
764 ft²71 m²
Downwind sail area
1302 ft²121 m²
1302 ft²121 m²
Mainsail area
291 ft²27 m²
291 ft²27 m²
Genoa area
474 ft²44 m²
474 ft²44 m²
Solent area
323 ft²30 m²
323 ft²30 m²
Jib area
258 ft²24 m²
258 ft²24 m²
Stormjib area
67 ft²6.25 m²
67 ft²6.25 m²
Symmetric spinnaker area
1012 ft²94 m²
1012 ft²94 m²
I
 iFore triangle height (from mast foot to fore stay top attachment)
45’ 6”13.87 m
45’ 6”13.87 m
J
 iFore triangle base (from mast foot to bottom of forestay)
13’ 1”4 m
13’ 1”4 m
P
 iMainsail hoist measurement (from tack to head)
40’ 5”12.3 m
40’ 5”12.3 m
E
 iMainsail foot measurement (from tack to clew)
12’ 10”3.9 m
12’ 10”3.9 m
Rigging type
Sloop Marconi masthead
Sloop Marconi masthead
Mast configuration
Deck stepped mast
Deck stepped mast
Rotating spars
No
No
Number of levels of spreaders
2
2
Spreaders angle
0 °
0 °
Spars construction
Aluminum spars
Aluminum spars
Standing rigging
1x19 strand wire
1x19 strand wire
 
PerformancesFeeling 1090 Deep draftFeeling 1090 Shoal draft
Upwind sail area to displacement
 iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.

The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size.

Upwind: under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 25 it indicates a fast sailboat.
265 ft²/T24.61 m²/T
265 ft²/T24.61 m²/T
Downwind sail area to displacement
 iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.

The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size.
451 ft²/T41.94 m²/T
451 ft²/T41.94 m²/T
Displacement-length ratio (DLR)
 iThe Displacement Length Ratio (DLR) is a figure that points out the boat's weight compared to its waterline length. The DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet).
The DLR can be used to compare the relative mass of different sailboats no matter what their length:

a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat.
204
204
Ballast ratio
 iThe Ballast ratio is an indicator of stability; it is obtained by dividing the boat's displacement by the mass of the ballast. Since the stability depends also of the hull shapes and the position of the center of gravity, only the boats with similar ballast arrangements and hull shapes should be compared.

The higher the ballast ratio is, the greater is the stability.
41 %
41 %
Wetted area
290 ft²26.9 m²
290 ft²26.9 m²
Righting moment @ 1°
 iThe righting moment is a moment (torque) that tends to restore a boat to its previous position after heeling. Its value corresponds to the torque needed to heel the boat for this angle.
Higher the righting moment is for an angle, greater is the stability.
959 lb.ft133 kg.m
959 lb.ft133 kg.m
Maximum transverse section
15 ft²1.41 m²
15 ft²1.41 m²
Critical hull speed
 iAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed".
The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34.
7.20 knots
7.20 knots
 
Auxiliary engineFeeling 1090 Deep draftFeeling 1090 Shoal draft
Engine(s)
1 inboard engine
1 inboard engine
Engine(s) power
28 HP
28 HP
Fuel type
Diesel
Diesel
Fuel tank capacity
31.7 gal120 liters
31.7 gal120 liters
 
Accommodations and layoutFeeling 1090 Deep draftFeeling 1090 Shoal draft
Cockpit
Closed aft cockpit
Closed aft cockpit
Cabin(s) (min./max.)
1 / 3
1 / 3
Berth(s) (min./max.)
6 / 8
6 / 8
Head(s)
1
1
Freshwater tank capacity
63.4 gal240 liters
63.4 gal240 liters
Fridge/ice-box capacity
31.7 gal120 liters
31.7 gal120 liters
Maximum headroom
6’ 1”1.85 m
6’ 1”1.85 m
 
Fore cabinFeeling 1090 Deep draftFeeling 1090 Shoal draft
Berth length
6’ 5”1.95 m
6’ 5”1.95 m
Berth width
4’ 5”1.35 m
4’ 5”1.35 m
 
Aft cabinFeeling 1090 Deep draftFeeling 1090 Shoal draft
Berth length
6’ 7”2 m
6’ 7”2 m
Berth width
5’ 2”1.6 m
5’ 2”1.6 m
 
Boat-Specs.com uses cookies to improve user experience. By using our website you consent to all cookies in accordance with our Cookie Policy.

Read more