Main features | First 30E Deep draft | First 30E S / Deep draft | First 30E Shoal draft |
Model | First 30E | First 30E | First 30E |
Version | Deep draft | S / Deep draft | Shoal draft |
Hull type | Monohull | Monohull | Monohull |
Category | Cruiser-racer sailboat | Cruiser-racer sailboat | Cruiser-racer sailboat |
Sailboat builder | Bénéteau | Bénéteau | Bénéteau |
Sailboat designer | |||
Sailboat range | |||
Sailboat collection | |||
Country | France | France | France |
Construction | GRP (glass reinforced polyester): - Hull: Single skin fiberglass polyester - Deck: Sandwich balsa fiberglass polyester | GRP (glass reinforced polyester): - Hull: Single skin fiberglass polyester - Deck: Sandwich balsa fiberglass polyester | GRP (glass reinforced polyester): - Hull: Single skin fiberglass polyester - Deck: Sandwich balsa fiberglass polyester |
Number of hulls built | 443 | 443 | 443 |
First built hull | 1981 | 1981 | 1981 |
Last built hull | 1984 | 1984 | 1984 |
Appendages | Keel : fin without bulb | Keel : fin without bulb | Keel : fin without bulb |
Helm | Single tiller | Single tiller | Single tiller |
Rudder | Single spade rudder | Single spade rudder | Single spade rudder |
Unsinkable | No | No | No |
Trailerable | No | No | No |
Former French navigation category | 2 | 2 | 2 |
Main dimensions | First 30E Deep draft | First 30E S / Deep draft | First 30E Shoal draft |
Overall length | 31’ 10”9.7 m | 31’ 10”9.7 m | 31’ 10”9.7 m |
Hull length | 30’ 4”9.25 m | 30’ 4”9.25 m | 30’ 4”9.25 m |
Waterline length | 25’ 4”7.71 m | 25’ 4”7.71 m | 25’ 4”7.71 m |
Beam (width) | 10’ 7”3.23 m | 10’ 7”3.23 m | 10’ 7”3.23 m |
Waterline beam (width) | 8’ 6”2.58 m | 8’ 6”2.58 m | 8’ 6”2.58 m |
Draft | 5’ 10”1.77 m | 5’ 10”1.77 m | 4’ 4”1.3 m |
Mast height from DWL | 41’ 6”12.65 m | 41’ 6”12.65 m | 41’ 6”12.65 m |
Fore freeboard | 3’ 6”1.08 m | 3’ 6”1.08 m | 3’ 6”1.08 m |
Mid-ship freeboard | 3’0.9 m | 3’0.9 m | 3’0.9 m |
Light displacement (MLC) | 7496 lb3400 kg | 6834 lb3100 kg | 7496 lb3400 kg |
Maximum displacement (MLDC) | 8929 lb4050 kg | 8929 lb4050 kg | 8929 lb4050 kg |
Ballast weight | 2866 lb1300 kg | 2976 lb1350 kg | 2866 lb1300 kg |
Ballast type | Cast iron | Cast iron | Cast iron |
French customs tonnage | 7.92 Tx | 7.92 Tx | 7.92 Tx |
Rig and sails | First 30E Deep draft | First 30E S / Deep draft | First 30E Shoal draft |
Upwind sail area | 518 ft²48.12 m² | 544 ft²50.5 m² | 518 ft²48.12 m² |
Downwind sail area | 916 ft²85.09 m² | 906 ft²84.2 m² | 916 ft²85.09 m² |
Mainsail area | 195 ft²18.09 m² | 250 ft²23.2 m² | 195 ft²18.09 m² |
Genoa area | 323 ft²30.03 m² | 294 ft²27.3 m² | 323 ft²30.03 m² |
Solent area | 273 ft²25.4 m² | 256 ft²23.8 m² | 273 ft²25.4 m² |
Jib area | 211 ft²19.6 m² | 211 ft²19.6 m² | 211 ft²19.6 m² |
Symmetric spinnaker area | 721 ft²67 m² | 657 ft²61 m² | 721 ft²67 m² |
I iFore triangle height (from mast foot to fore stay top attachment) | 37’ 8”11.5 m | 37’ 8”11.5 m | 37’ 8”11.5 m |
J iFore triangle base (from mast foot to bottom of forestay) | 11’ 4”3.45 m | 11’ 4”3.45 m | 11’ 4”3.45 m |
P iMainsail hoist measurement (from tack to head) | 32’ 6”9.9 m | 32’ 6”9.9 m | 32’ 6”9.9 m |
E iMainsail foot measurement (from tack to clew) | 11’3.35 m | 11’3.35 m | 11’3.35 m |
Rigging type | Sloop Marconi masthead | Sloop Marconi 7/8 | Sloop Marconi masthead |
Mast configuration | Deck stepped mast | Keel stepped mast | Deck stepped mast |
Rotating spars | No | No | No |
Number of levels of spreaders | 1 | 2 | 1 |
Spreaders angle | 0 ° | 0 ° | 0 ° |
Running backstays | 2 set(s) | ||
Spars construction | Aluminum spars | Aluminum spars | Aluminum spars |
Standing rigging | 1x19 strand wire continuous | 1x19 strand wire continuous | 1x19 strand wire continuous |
Performances | First 30E Deep draft | First 30E S / Deep draft | First 30E Shoal draft |
HN (French rating) iHN or "Handicap Nationale" is an empirical rating system used in France allowing various monohulls, of different sizes and designs, to race each other fairly. It is particularly suitable for cruiser and cruiser-racer. Therefore, by comparing these values, we can have an indication of the relative speed of 2 boats. | 16.0 | 16.0 | 16.0 |
Upwind sail area to displacement iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size. Upwind: under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 25 it indicates a fast sailboat. | 229 ft²/T21.28 m²/T | 256 ft²/T23.75 m²/T | 229 ft²/T21.28 m²/T |
Downwind sail area to displacement iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size. | 405 ft²/T37.63 m²/T | 426 ft²/T39.6 m²/T | 405 ft²/T37.63 m²/T |
Displacement-length ratio (DLR) iThe Displacement Length Ratio (DLR) is a figure that points out the boat's weight compared to its waterline length. The DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet).The DLR can be used to compare the relative mass of different sailboats no matter what their length: a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat. | 210 | 192 | 210 |
Ballast ratio iThe Ballast ratio is an indicator of stability; it is obtained by dividing the boat's displacement by the mass of the ballast. Since the stability depends also of the hull shapes and the position of the center of gravity, only the boats with similar ballast arrangements and hull shapes should be compared.The higher the ballast ratio is, the greater is the stability. | 38 % | 44 % | 38 % |
Wetted area | 202 ft²18.8 m² | 202 ft²18.8 m² | 202 ft²18.8 m² |
Righting moment @ 1° iThe righting moment is a moment (torque) that tends to restore a boat to its previous position after heeling. Its value corresponds to the torque needed to heel the boat for this angle.Higher the righting moment is for an angle, greater is the stability. | 439 lb.ft61 kg.m | 439 lb.ft61 kg.m | 439 lb.ft61 kg.m |
Maximum transverse section | 12 ft²1.07 m² | 12 ft²1.07 m² | 12 ft²1.07 m² |
Critical hull speed iAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed".The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34. | 6.74 knots | 6.74 knots | 6.74 knots |
Auxiliary engine | First 30E Deep draft | First 30E S / Deep draft | First 30E Shoal draft |
Engine(s) | 1 inboard engine | 1 inboard engine | 1 inboard engine |
Engine(s) power (min./max.) | 6 HP / 15 HP | 6 HP / 8 HP | 6 HP / 15 HP |
Fuel type | Diesel | Diesel | Diesel |
Fuel tank capacity | 7.9 gal30 liters | 2.6 gal10 liters | 7.9 gal30 liters |
Accommodations and layout | First 30E Deep draft | First 30E S / Deep draft | First 30E Shoal draft |
Cockpit | Closed aft cockpit | Closed aft cockpit | Closed aft cockpit |
Cabin(s) | 2 | 2 | 2 |
Berth(s) (min./max.) | 6 / 7 | 5 | 6 / 7 |
Head(s) | 1 | 1 | 1 |
Freshwater tank capacity | 26.4 gal100 liters | 26.4 gal100 liters | 26.4 gal100 liters |
Maximum headroom | 5’ 10”1.76 m | 5’ 10”1.76 m | 5’ 10”1.76 m |
Head headroom | 5’ 7”1.71 m | 5’ 7”1.71 m | 5’ 7”1.71 m |
Saloon | First 30E Deep draft | First 30E S / Deep draft | First 30E Shoal draft |
Maximum headroom | 5’ 10”1.76 m | 5’ 10”1.76 m | 5’ 10”1.76 m |
Saloon table length | 3’ 6”1.08 m | 3’ 6”1.08 m | 3’ 6”1.08 m |
Saloon table width | 2’ 10”0.85 m | 2’ 10”0.85 m | 2’ 10”0.85 m |
Berth length | 6’ 5”1.95 m | 6’ 5”1.95 m | 6’ 5”1.95 m |
Berth width (head/feet) | 2’0.6 m / 1’ 7”0.48 m | 2’0.6 m / 1’ 7”0.48 m | 2’0.6 m / 1’ 7”0.48 m |
Fore cabin | First 30E Deep draft | First 30E S / Deep draft | First 30E Shoal draft |
Maximum headroom | 5’ 1”1.54 m | 5’ 1”1.54 m | 5’ 1”1.54 m |
Berth length | 6’1.84 m | 6’1.84 m | 6’1.84 m |
Berth width (head/feet) | 5’ 2”1.6 m / 0’ 10”0.25 m | 5’ 2”1.6 m / 0’ 10”0.25 m | 5’ 2”1.6 m / 0’ 10”0.25 m |
Aft cabin | First 30E Deep draft | First 30E S / Deep draft | First 30E Shoal draft |
Maximum headroom | 5’ 6”1.68 m | 5’ 6”1.68 m | 5’ 6”1.68 m |
Berth length | 6’ 8”2.03 m | 6’ 8”2.03 m | 6’ 8”2.03 m |
Berth width (head/feet) | 3’ 5”1.05 m / 1’ 10”0.55 m | 3’ 5”1.05 m / 1’ 10”0.55 m | 3’ 5”1.05 m / 1’ 10”0.55 m |