Detailed sailboat specifications and datasheets since 2015
MetricSI (m)
Imperial & Metricboth
ImperialIMP (ft)

Kelt 9m (Fin keel) vs Kelt 9m (Keel and centerboard)

Main featuresKelt 9m Fin keelKelt 9m Keel and centerboard
Model
Kelt 9m
Kelt 9m
Version
Fin keel
Keel and centerboard
Hull type
Monohull
Monohull
Category
Cruising sailboat
Cruising sailboat
Sailboat builder
Kelt
Kelt
Sailboat designer
Country
France
France
Construction
GRP (glass reinforced polyester):
- Hull: Single skin fiberglass polyester
- Deck: Sandwich fiberglass polyester
GRP (glass reinforced polyester):
- Hull: Single skin fiberglass polyester
- Deck: Sandwich fiberglass polyester
Number of hulls built
About 100
About 100
First built hull
1981
1981
Last built hull
1985
1985
Appendages
Keel : fin without bulb
Centerboard : pivoting centerboard in the keel
Helm
Single tiller
Single tiller
Rudder
Single spade rudder
Single spade rudder
Unsinkable
No
No
Trailerable
No
No
Former French navigation category
2
2
 
Main dimensionsKelt 9m Fin keelKelt 9m Keel and centerboard
Overall length
29’ 8”9.05 m
29’ 8”9.05 m
Hull length
29’ 6”9 m
29’ 6”9 m
Waterline length
24’ 4”7.4 m
24’ 4”7.4 m
Beam (width)
10’3.05 m
10’3.05 m
Waterline beam (width)
7’ 8”2.36 m
7’ 8”2.36 m
Draft
5’ 11”1.8 m
6’ 2”1.9 m
Draft when appendages up
3’ 2”0.97 m
Mast height from DWL
41’ 8”12.7 m
41’ 8”12.7 m
Fore freeboard
3’ 7”1.11 m
3’ 7”1.11 m
Mid-ship freeboard
3’ 4”1.02 m
3’ 4”1.02 m
Light displacement (MLC)
5688 lb2580 kg
5688 lb2580 kg
Maximum displacement (MLDC)
7198 lb3265 kg
7198 lb3265 kg
Ballast weight
2778 lb1260 kg
2778 lb1260 kg
Ballast type
Cast iron
Cast iron exterior ballast with steel centerboard
 
Rig and sailsKelt 9m Fin keelKelt 9m Keel and centerboard
Upwind sail area
535 ft²49.67 m²
535 ft²49.67 m²
Downwind sail area
930 ft²86.42 m²
930 ft²86.42 m²
Mainsail area
198 ft²18.42 m²
198 ft²18.42 m²
Genoa area
336 ft²31.25 m²
336 ft²31.25 m²
Symmetric spinnaker area
732 ft²68 m²
732 ft²68 m²
I
 iFore triangle height (from mast foot to fore stay top attachment)
40’ 5”12.3 m
40’ 5”12.3 m
J
 iFore triangle base (from mast foot to bottom of forestay)
11’ 6”3.5 m
11’ 6”3.5 m
P
 iMainsail hoist measurement (from tack to head)
34’ 11”10.65 m
34’ 11”10.65 m
E
 iMainsail foot measurement (from tack to clew)
10’ 10”3.3 m
10’ 10”3.3 m
Rigging type
Sloop Marconi masthead
Sloop Marconi masthead
Mast configuration
Deck stepped mast
Deck stepped mast
Rotating spars
No
No
Number of levels of spreaders
1
1
Spreaders angle
0 °
0 °
Spars construction
Aluminum spars
Aluminum spars
Standing rigging
1x19 strand wire continuous
1x19 strand wire continuous
 
PerformancesKelt 9m Fin keelKelt 9m Keel and centerboard
HN (French rating)
 iHN or "Handicap Nationale" is an empirical rating system used in France allowing various monohulls, of different sizes and designs, to race each other fairly. It is particularly suitable for cruiser and cruiser-racer. Therefore, by comparing these values, we can have an indication of the relative speed of 2 boats.
14.0
16.0
Upwind sail area to displacement
 iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.

The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size.

Upwind: under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 25 it indicates a fast sailboat.
284 ft²/T26.4 m²/T
284 ft²/T26.4 m²/T
Downwind sail area to displacement
 iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.

The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size.
494 ft²/T45.94 m²/T
494 ft²/T45.94 m²/T
Displacement-length ratio (DLR)
 iThe Displacement Length Ratio (DLR) is a figure that points out the boat's weight compared to its waterline length. The DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet).
The DLR can be used to compare the relative mass of different sailboats no matter what their length:

a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat.
180
180
Ballast ratio
 iThe Ballast ratio is an indicator of stability; it is obtained by dividing the boat's displacement by the mass of the ballast. Since the stability depends also of the hull shapes and the position of the center of gravity, only the boats with similar ballast arrangements and hull shapes should be compared.

The higher the ballast ratio is, the greater is the stability.
49 %
49 %
Wetted area
197 ft²18.26 m²
191 ft²17.71 m²
Righting moment @ 1°
 iThe righting moment is a moment (torque) that tends to restore a boat to its previous position after heeling. Its value corresponds to the torque needed to heel the boat for this angle.
Higher the righting moment is for an angle, greater is the stability.
359 lb.ft50 kg.m
359 lb.ft50 kg.m
Maximum transverse section
8 ft²0.77 m²
8 ft²0.77 m²
Critical hull speed
 iAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed".
The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34.
6.60 knots
6.60 knots
 
Auxiliary engineKelt 9m Fin keelKelt 9m Keel and centerboard
Engine(s)
1 inboard engine
1 inboard engine
Engine(s) power
18 HP
18 HP
Fuel type
Diesel
Diesel
Fuel tank capacity
6.6 gal25 liters
6.6 gal25 liters
 
Accommodations and layoutKelt 9m Fin keelKelt 9m Keel and centerboard
Cockpit
Closed aft cockpit
Closed aft cockpit
Cabin(s)
2
2
Berth(s)
6
6
Head(s)
1
1
Freshwater tank capacity
31.7 gal120 liters
31.7 gal120 liters
Fridge/ice-box capacity
17.2 gal65 liters
17.2 gal65 liters
Maximum headroom
6’ 4”1.92 m
6’ 4”1.92 m
Galley headroom
6’ 1”1.85 m
6’ 1”1.85 m
Head headroom
5’ 10”1.77 m
5’ 10”1.77 m
 
SaloonKelt 9m Fin keelKelt 9m Keel and centerboard
Maximum headroom
6’ 1”1.85 m
6’ 1”1.85 m
Saloon table length
4’1.23 m
4’1.23 m
Saloon table width
2’ 2”0.67 m
2’ 2”0.67 m
Berth length
6’ 4”1.91 m
6’ 4”1.91 m
Berth width
2’0.6 m
2’0.6 m
 
Fore cabinKelt 9m Fin keelKelt 9m Keel and centerboard
Maximum headroom
5’ 2”1.58 m
5’ 2”1.58 m
Berth length
6’ 2”1.9 m
6’ 2”1.9 m
Berth width
4’ 2”1.28 m
4’ 2”1.28 m
 
Aft cabinKelt 9m Fin keelKelt 9m Keel and centerboard
Maximum headroom
5’ 10”1.78 m
5’ 10”1.78 m
Berth length
6’ 4”1.93 m
6’ 4”1.93 m
Berth width
4’ 2”1.27 m
4’ 2”1.27 m
 
Boat-Specs.com uses cookies to improve user experience. By using our website you consent to all cookies in accordance with our Cookie Policy.

Read more