Detailed sailboat specifications and datasheets since 2015
MetricSI (m)
Imperial & Metricboth
ImperialIMP (ft)

Elan 310 (Standard) vs Elan 310 (Deep draft)

Main featuresElan 310 StandardElan 310 Deep draft
Model
Elan 310
Elan 310
Version
Standard
Deep draft
Hull type
Monohull
Monohull
Category
Cruiser-racer sailboat
Cruiser-racer sailboat
Sailboat builder
Elan Yachts
Elan Yachts
Sailboat designer
Country
Slovenia
Slovenia
Construction
Hull and deck: GRP (glass reinforced polyester)
Hull and deck: GRP (glass reinforced polyester)
First built hull
2009
2009
Last built hull
Discontinued
Discontinued
Appendages
Keel : T-shaped keel (with bulb)
Keel : T-shaped keel (with bulb)
Helm
Single tiller
Single tiller
Rudder
Twin spade rudders
Twin spade rudders
Unsinkable
No
No
Trailerable
No
No
EC design category
 iThe CE design category indicates the ability to cope with certain weather conditions (the sailboat is designed for these conditions)

A: Wind < force 9, Waves < 10m
B: Wind < force 8, Waves < 8m
C: Wind < force 6, Waves < 4m
D: Wind < force 4, Waves < 0,5m
A
A
 
Main dimensionsElan 310 StandardElan 310 Deep draft
Overall length
31’ 4”9.55 m
31’ 4”9.55 m
Hull length
30’ 4”9.25 m
30’ 4”9.25 m
Waterline length
28’ 7”8.71 m
28’ 7”8.71 m
Beam (width)
10’ 7”3.22 m
10’ 7”3.22 m
Draft
6’ 2”1.9 m
7’ 1”2.15 m
Light displacement (MLC)
8576 lb3890 kg
6063 lb2750 kg
Ballast weight
2293 lb1040 kg
1984 lb900 kg
 
Rig and sailsElan 310 StandardElan 310 Deep draft
Upwind sail area
577 ft²53.62 m²
577 ft²53.62 m²
Downwind sail area
1132 ft²105.15 m²
1132 ft²105.15 m²
Mainsail area
325 ft²30.15 m²
325 ft²30.15 m²
Genoa area
253 ft²23.47 m²
253 ft²23.47 m²
Asymmetric spinnaker area
807 ft²75 m²
807 ft²75 m²
Gennaker area
807 ft²75 m²
807 ft²75 m²
I
 iFore triangle height (from mast foot to fore stay top attachment)
40’ 2”12.25 m
40’ 2”12.25 m
J
 iFore triangle base (from mast foot to bottom of forestay)
11’ 8”3.58 m
11’ 8”3.58 m
P
 iMainsail hoist measurement (from tack to head)
39’ 6”12.05 m
39’ 6”12.05 m
E
 iMainsail foot measurement (from tack to clew)
13’ 6”4.13 m
13’ 6”4.13 m
Rigging type
Sloop Marconi 9/10
Sloop Marconi 9/10
Mast configuration
Keel stepped mast
Keel stepped mast
Rotating spars
No
No
Number of levels of spreaders
2
2
Spreaders angle
Swept-back
Swept-back
Spars construction
Aluminum spars
Aluminum spars
 
PerformancesElan 310 StandardElan 310 Deep draft
Upwind sail area to displacement
 iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.

The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size.

Upwind: under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 25 it indicates a fast sailboat.
233 ft²/T21.68 m²/T
294 ft²/T27.32 m²/T
Downwind sail area to displacement
 iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.

The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size.
458 ft²/T42.51 m²/T
577 ft²/T53.57 m²/T
Displacement-length ratio (DLR)
 iThe Displacement Length Ratio (DLR) is a figure that points out the boat's weight compared to its waterline length. The DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet).
The DLR can be used to compare the relative mass of different sailboats no matter what their length:

a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat.
167
118
Ballast ratio
 iThe Ballast ratio is an indicator of stability; it is obtained by dividing the boat's displacement by the mass of the ballast. Since the stability depends also of the hull shapes and the position of the center of gravity, only the boats with similar ballast arrangements and hull shapes should be compared.

The higher the ballast ratio is, the greater is the stability.
27 %
33 %
Righting moment @ 30°
 iThe righting moment is a moment (torque) that tends to restore a boat to its previous position after heeling. Its value corresponds to the torque needed to heel the boat for this angle.
Higher the righting moment is for an angle, greater is the stability.
12296 lb.ft1700 kg.m
12296 lb.ft1700 kg.m
Maximum righting moment
 iThe righting moment is a moment (torque) that tends to restore a boat to its previous position after heeling. Its value corresponds to the torque needed to heel the boat for this angle.
Higher the righting moment is for an angle, greater is the stability.
17359 lb.ft2400 kg.m @ 75.00 °
17359 lb.ft2400 kg.m @ 75.00 °
Critical hull speed
 iAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed".
The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34.
7.16 knots
7.16 knots
 
Auxiliary engineElan 310 StandardElan 310 Deep draft
Engine(s)
1 inboard engine
1 inboard engine
Engine(s) power
18 HP
18 HP
Fuel type
Diesel
Diesel
Fuel tank capacity
11.9 gal45 liters
11.9 gal45 liters
 
Accommodations and layoutElan 310 StandardElan 310 Deep draft
Cockpit
Open aft cockpit
Open aft cockpit
Cabin(s)
2
2
Berth(s) (min./max.)
4 / 6
4 / 6
Head(s)
1
1
Freshwater tank capacity
37 gal140 liters
37 gal140 liters
Maximum headroom
6’1.82 m
6’1.82 m
 
Boat-Specs.com uses cookies to improve user experience. By using our website you consent to all cookies in accordance with our Cookie Policy.

Read more