Detailed sailboat specifications and datasheets since 2015
MetricSI (m)
Imperial & Metricboth
ImperialIMP (ft)

Catalina 25 (Fin keel) vs Catalina 25 (Wing keel) vs Catalina 25 (Swing keel) vs Catalina 25 (Tall rig)

Main featuresCatalina 25 Fin keelCatalina 25 Wing keelCatalina 25 Swing keelCatalina 25 Tall rig
Model
Catalina 25
Catalina 25
Catalina 25
Catalina 25
Version
Fin keel
Wing keel
Swing keel
Tall rig
Hull type
Monohull
Monohull
Monohull
Monohull
Category
Cruising sailboat
Cruising sailboat
Cruising sailboat
Cruising sailboat
Sailboat builder
Catalina Yachts
Catalina Yachts
Catalina Yachts
Catalina Yachts
Sailboat designer
Country
United States
United States
United States
United States
Construction
Hull and deck: GRP (glass reinforced polyester)
Hull and deck: GRP (glass reinforced polyester)
Hull and deck: GRP (glass reinforced polyester)
Hull and deck: GRP (glass reinforced polyester)
Number of hulls built
5866
5866
5866
5866
First built hull
1978
1978
1978
1978
Last built hull
1994
1994
1994
1994
Appendages
Keel : fin without bulb
Keel : wing keel
Lifting keel : swing keel
Keel : fin without bulb
Helm
Single tiller
Single tiller
Single tiller
Single tiller
Rudder
Single transom hung rudder
Single transom hung rudder
Single transom hung rudder
Single transom hung rudder
Unsinkable
No
No
No
No
Trailerable
No
No
No
No
 
Main dimensionsCatalina 25 Fin keelCatalina 25 Wing keelCatalina 25 Swing keelCatalina 25 Tall rig
Hull length
25’7.62 m
25’7.62 m
25’7.62 m
25’7.62 m
Waterline length
22’ 2”6.76 m
22’ 2”6.76 m
22’ 2”6.76 m
22’ 2”6.76 m
Beam (width)
8’2.44 m
8’2.44 m
8’2.44 m
8’2.44 m
Draft
2’ 10”0.86 m
5’1.52 m
Draft when appendages up
2’ 8”0.81 m
Light displacement (MLC)
4550 lb2064 kg
4398 lb1995 kg
4149 lb1882 kg
4550 lb2064 kg
Ballast weight
1896 lb860 kg
1753 lb795 kg
1499 lb680 kg
1896 lb860 kg
 
Rig and sailsCatalina 25 Fin keelCatalina 25 Wing keelCatalina 25 Swing keelCatalina 25 Tall rig
Upwind sail area
270 ft²25.08 m²
270 ft²25.08 m²
270 ft²25.08 m²
295 ft²27.4 m²
I
 iFore triangle height (from mast foot to fore stay top attachment)
29’8.84 m
29’8.84 m
29’8.84 m
31’9.44 m
J
 iFore triangle base (from mast foot to bottom of forestay)
10’ 6”3.2 m
10’ 6”3.2 m
10’ 6”3.2 m
10’ 6”3.2 m
P
 iMainsail hoist measurement (from tack to head)
24’ 8”7.52 m
24’ 8”7.52 m
24’ 8”7.52 m
27’ 8”8.43 m
E
 iMainsail foot measurement (from tack to clew)
9’ 8”2.95 m
9’ 8”2.95 m
9’ 8”2.95 m
9’ 8”2.95 m
Rigging type
Sloop Marconi masthead
Sloop Marconi masthead
Sloop Marconi masthead
Sloop Marconi masthead
Mast configuration
Deck stepped mast
Deck stepped mast
Deck stepped mast
Deck stepped mast
Rotating spars
No
No
No
No
Number of levels of spreaders
1
1
1
1
Spreaders angle
0 °
0 °
0 °
0 °
Spars construction
Aluminum spars
Aluminum spars
Aluminum spars
Aluminum spars
Standing rigging
1x19 strand wire continuous
1x19 strand wire continuous
1x19 strand wire continuous
1x19 strand wire continuous
 
PerformancesCatalina 25 Fin keelCatalina 25 Wing keelCatalina 25 Swing keelCatalina 25 Tall rig
Upwind sail area to displacement
 iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.

The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size.

Upwind: under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 25 it indicates a fast sailboat.
167 ft²/T15.47 m²/T
170 ft²/T15.83 m²/T
177 ft²/T16.45 m²/T
182 ft²/T16.9 m²/T
Displacement-length ratio (DLR)
 iThe Displacement Length Ratio (DLR) is a figure that points out the boat's weight compared to its waterline length. The DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet).
The DLR can be used to compare the relative mass of different sailboats no matter what their length:

a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat.
189
183
173
189
Ballast ratio
 iThe Ballast ratio is an indicator of stability; it is obtained by dividing the boat's displacement by the mass of the ballast. Since the stability depends also of the hull shapes and the position of the center of gravity, only the boats with similar ballast arrangements and hull shapes should be compared.

The higher the ballast ratio is, the greater is the stability.
42 %
40 %
36 %
42 %
Critical hull speed
 iAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed".
The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34.
6.31 knots
6.31 knots
6.31 knots
6.31 knots
 
Auxiliary engineCatalina 25 Fin keelCatalina 25 Wing keelCatalina 25 Swing keelCatalina 25 Tall rig
Engine(s)
1 outboard engine
1 outboard engine
1 outboard engine
1 outboard engine
 
Accommodations and layoutCatalina 25 Fin keelCatalina 25 Wing keelCatalina 25 Swing keelCatalina 25 Tall rig
Cockpit
Closed aft cockpit
Closed aft cockpit
Closed aft cockpit
Closed aft cockpit
Cabin(s)
1
1
1
1
Berth(s) (min./max.)
3 / 4
3 / 4
3 / 4
3 / 4
Head(s)
1
1
1
1
 
Boat-Specs.com uses cookies to improve user experience. By using our website you consent to all cookies in accordance with our Cookie Policy.

Read more