Detailed sailboat specifications and datasheets since 2015
MetricSI (m)
Imperial & Metricboth
ImperialIMP (ft)

Océanis 35.1 (Deep draft) vs Océanis 35.1 (Keel and centerboard) vs Océanis 35.1 (Shoal draft)

Main featuresOcéanis 35.1 Deep draftOcéanis 35.1 Keel and centerboardOcéanis 35.1 Shoal draft
Model
Océanis 35.1
Océanis 35.1
Océanis 35.1
Version
Deep draft
Keel and centerboard
Shoal draft
Hull type
Monohull
Monohull
Monohull
Category
Cruising sailboat
Cruising sailboat
Cruising sailboat
Sailboat builder
Bénéteau
Bénéteau
Bénéteau
Sailboat designer
Sailboat range
Country
France
France
France
Construction
GRP (glass reinforced polyester):
- Hull: Single skin fiberglass polyester
- Deck: Sandwich fiberglass polyester
GRP (glass reinforced polyester):
- Hull: Single skin fiberglass polyester
- Deck: Sandwich fiberglass polyester
GRP (glass reinforced polyester):
- Hull: Single skin fiberglass polyester
- Deck: Sandwich fiberglass polyester
First built hull
2016
2016
2016
Last built hull
Still in production
Still in production
Still in production
Appendages
Keel : fin with bulb
Centerboard : pivoting centerboard in the keel
Keel : fin with bulb
Helm
Twin helm wheels
Twin helm wheels
Twin helm wheels
Rudder
Twin spade rudders
Twin spade rudders
Twin spade rudders
Unsinkable
No
No
No
Trailerable
No
No
No
EC design category
 iThe CE design category indicates the ability to cope with certain weather conditions (the sailboat is designed for these conditions)

A: Wind < force 9, Waves < 10m
B: Wind < force 8, Waves < 8m
C: Wind < force 6, Waves < 4m
D: Wind < force 4, Waves < 0,5m
A
A
A
Standard public price ex. VAT (indicative only)
120000 2020
120000 2020
120000 2020
 
Main dimensionsOcéanis 35.1 Deep draftOcéanis 35.1 Keel and centerboardOcéanis 35.1 Shoal draft
Overall length
34’ 4”10.45 m
34’ 4”10.45 m
34’ 4”10.45 m
Hull length
32’ 8”9.97 m
32’ 8”9.97 m
32’ 8”9.97 m
Waterline length
31’ 10”9.7 m
31’ 10”9.7 m
31’ 10”9.7 m
Beam (width)
12’ 2”3.72 m
12’ 2”3.72 m
12’ 2”3.72 m
Draft
6’ 1”1.85 m
7’ 6”2.3 m
4’ 10”1.45 m
Draft when appendages up
3’ 10”1.15 m
Light displacement (MLC)
12198 lb5533 kg
13503 lb6125 kg
12785 lb5799 kg
Ballast weight
3437 lb1559 kg
4742 lb2151 kg
4023 lb1825 kg
Ballast type
Cast iron
Cast iron exterior ballast with steel centerboard
Cast iron
 
Rig and sailsOcéanis 35.1 Deep draftOcéanis 35.1 Keel and centerboardOcéanis 35.1 Shoal draft
Upwind sail area
584 ft²54.22 m²
584 ft²54.22 m²
584 ft²54.22 m²
Downwind sail area
1194 ft²110.95 m²
1194 ft²110.95 m²
1194 ft²110.95 m²
Mainsail area
296 ft²27.5 m²
296 ft²27.5 m²
296 ft²27.5 m²
Genoa area
288 ft²26.72 m²
288 ft²26.72 m²
288 ft²26.72 m²
Jib area
274 ft²25.5 m²
274 ft²25.5 m²
274 ft²25.5 m²
Asymmetric spinnaker area
898 ft²83.45 m²
898 ft²83.45 m²
898 ft²83.45 m²
Code 0 area
548 ft²50.9 m²
548 ft²50.9 m²
548 ft²50.9 m²
I
 iFore triangle height (from mast foot to fore stay top attachment)
40’ 10”12.45 m
40’ 10”12.45 m
40’ 10”12.45 m
J
 iFore triangle base (from mast foot to bottom of forestay)
14’ 1”4.29 m
14’ 1”4.29 m
14’ 1”4.29 m
P
 iMainsail hoist measurement (from tack to head)
40’12.2 m
40’12.2 m
40’12.2 m
E
 iMainsail foot measurement (from tack to clew)
12’ 10”3.9 m
12’ 10”3.9 m
12’ 10”3.9 m
Rigging type
Sloop Marconi 9/10
Sloop Marconi 9/10
Sloop Marconi 9/10
Mast configuration
Deck stepped mast
Deck stepped mast
Deck stepped mast
Rotating spars
No
No
No
Number of levels of spreaders
2
2
2
Spreaders angle
Swept-back
Swept-back
Swept-back
Spars construction
Aluminum spars
Aluminum spars
Aluminum spars
Standing rigging
1x19 strand wire
1x19 strand wire
1x19 strand wire
 
PerformancesOcéanis 35.1 Deep draftOcéanis 35.1 Keel and centerboardOcéanis 35.1 Shoal draft
Upwind sail area to displacement
 iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.

The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size.

Upwind: under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 25 it indicates a fast sailboat.
187 ft²/T17.33 m²/T
174 ft²/T16.2 m²/T
181 ft²/T16.8 m²/T
Downwind sail area to displacement
 iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.

The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size.
382 ft²/T35.47 m²/T
357 ft²/T33.14 m²/T
370 ft²/T34.37 m²/T
Displacement-length ratio (DLR)
 iThe Displacement Length Ratio (DLR) is a figure that points out the boat's weight compared to its waterline length. The DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet).
The DLR can be used to compare the relative mass of different sailboats no matter what their length:

a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat.
172
190
180
Ballast ratio
 iThe Ballast ratio is an indicator of stability; it is obtained by dividing the boat's displacement by the mass of the ballast. Since the stability depends also of the hull shapes and the position of the center of gravity, only the boats with similar ballast arrangements and hull shapes should be compared.

The higher the ballast ratio is, the greater is the stability.
28 %
35 %
31 %
Critical hull speed
 iAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed".
The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34.
7.56 knots
7.56 knots
7.56 knots
 
Auxiliary engineOcéanis 35.1 Deep draftOcéanis 35.1 Keel and centerboardOcéanis 35.1 Shoal draft
Engine(s)
1 inboard engine
1 inboard engine
1 inboard engine
Engine(s) power
30 HP
30 HP
30 HP
Fuel type
Diesel
Diesel
Diesel
Fuel tank capacity
34.3 gal130 liters
34.3 gal130 liters
34.3 gal130 liters
 
Accommodations and layoutOcéanis 35.1 Deep draftOcéanis 35.1 Keel and centerboardOcéanis 35.1 Shoal draft
Cockpit
Open aft cockpit
Open aft cockpit
Open aft cockpit
Cabin(s) (min./max.)
2 / 3
2 / 3
2 / 3
Berth(s) (min./max.)
4 / 8
4 / 8
4 / 8
Head(s)
1
1
1
Freshwater tank capacity
34.3 gal130 liters
34.3 gal130 liters
34.3 gal130 liters
Holding tank capacity
21.1 gal80 liters
21.1 gal80 liters
21.1 gal80 liters
Fridge/ice-box capacity
34.3 gal130 liters
34.3 gal130 liters
34.3 gal130 liters
Boiler capacity
6.6 gal25 liters
6.6 gal25 liters
6.6 gal25 liters
Galley headroom
6’ 2”1.9 m
6’ 2”1.9 m
6’ 2”1.9 m
Head headroom
6’ 2”1.9 m
6’ 2”1.9 m
6’ 2”1.9 m
 
SaloonOcéanis 35.1 Deep draftOcéanis 35.1 Keel and centerboardOcéanis 35.1 Shoal draft
Maximum headroom
6’ 2”1.9 m
6’ 2”1.9 m
6’ 2”1.9 m
 
Fore cabinOcéanis 35.1 Deep draftOcéanis 35.1 Keel and centerboardOcéanis 35.1 Shoal draft
Maximum headroom
5’ 11”1.8 m
5’ 11”1.8 m
5’ 11”1.8 m
Berth length
5’ 8”1.75 m
5’ 8”1.75 m
5’ 8”1.75 m
Berth width (head/feet)
6’ 7”2 m / 1’ 6”0.45 m
6’ 7”2 m / 1’ 6”0.45 m
6’ 7”2 m / 1’ 6”0.45 m
 
Aft cabinOcéanis 35.1 Deep draftOcéanis 35.1 Keel and centerboardOcéanis 35.1 Shoal draft
Maximum headroom
5’ 8”1.75 m
5’ 8”1.75 m
5’ 8”1.75 m
Berth length
6’ 7”2 m
6’ 7”2 m
6’ 7”2 m
Berth width
4’ 10”1.45 m
4’ 10”1.45 m
4’ 10”1.45 m
 
Boat-Specs.com uses cookies to improve user experience. By using our website you consent to all cookies in accordance with our Cookie Policy.

Read more