Detailed sailboat specifications and datasheets since 2015
MetricSI (m)
Imperial & Metricboth
ImperialIMP (ft)

Romanée Deep draft

Sailboat specifications

The Romanée is a 33’6” (10.2m) cruising sailboat designed by Philippe Harlé (France). She was built between 1973 and 1984 by Pouvreau (France). The Deep draft version displays a deeper fin allowing a lower center of gravity and extra performance especially upwind.

The Romanée is as well listed, on Boat-Specs.com, in Shoal draft version (see all the versions compared).

Romanée's main features

Model
Romanée
Version
Deep draft
Hull type
Monohull
Category
Offshore cruising sailboat
Sailboat builder
Sailboat designer
Country
France
Construction
Hull and deck: aluminum
Number of hulls built
About 300
First built hull
1973
Last built hull
1984
Appendages
Keel : fin without bulb
Helm
Single tiller
Rudder
Single rudder on skeg
Unsinkable
No
Trailerable
No
Former French navigation category
1
Standard public price ex. VAT (indicative only)
N/A

Romanée's main dimensions

Hull length
33’ 6”10.2 m
Waterline length
26’ 2”8 m
Beam (width)
11’ 6”3.52 m
Draft
6’ 1”1.85 m
Light displacement (MLC)
10141 lb4600 kg
Ballast weight
3638 lb1650 kg
French customs tonnage
9.90 Tx

Romanée's rig and sails

Upwind sail area
677 ft²62.9 m²
Downwind sail area
1178 ft²109.4 m²
Mainsail area
220 ft²20.4 m²
Genoa area
457 ft²42.5 m²
Symmetric spinnaker area
958 ft²89 m²
Rigging type
Sloop Marconi masthead
Mast configuration
Deck stepped mast
Rotating spars
No
Number of levels of spreaders
1
Spreaders angle
0 °
Spars construction
Aluminum spars
Standing rigging
1x19 strand wire continuous

Romanée's performances

Upwind sail area to displacement
 iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.

The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size.

Upwind: under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 25 it indicates a fast sailboat.
245 ft²/T22.74 m²/T
Downwind sail area to displacement
 iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.

The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size.
426 ft²/T39.55 m²/T
Displacement-length ratio (DLR)
 iThe Displacement Length Ratio (DLR) is a figure that points out the boat's weight compared to its waterline length. The DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet).
The DLR can be used to compare the relative mass of different sailboats no matter what their length:

a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat.
254
Ballast ratio
 iThe Ballast ratio is an indicator of stability; it is obtained by dividing the boat's displacement by the mass of the ballast. Since the stability depends also of the hull shapes and the position of the center of gravity, only the boats with similar ballast arrangements and hull shapes should be compared.

The higher the ballast ratio is, the greater is the stability.
36 %
Critical hull speed
 iAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed".
The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34.
6.87 knots

Romanée's auxiliary engine

Engine(s)
1 inboard engine
Engine(s) power
27 HP
Fuel type
Diesel
Fuel tank capacity
31.7 gal120 liters

Romanée's accommodations and layout

Cockpit
Closed aft cockpit
Cabin(s) (min./max.)
2 / 3
Berth(s) (min./max.)
8 / 9
Head(s)
1
Freshwater tank capacity
52.8 gal200 liters
Maximum headroom
6’1.84 m
Have you spotted incorrect data?  You can report it in the forum or contact the webmaster

Similar sailboats that may interest you:


Sailboats
First built hull
Hull length
Dufour 36 Classic Deep draft (Dufour)
1999
35’ 4”10.75 m
Symphonie Deep draft (Jeanneau)
1978
31’ 2”9.5 m
Albin Ballad (Albin Marine)
1971
30’9.14 m
Gib'Sea 372 Deep draft (Gibert Marine)
1987
35’ 10”10.9 m
Attalia 32 Deep draft (Jeanneau)
1983
30’ 2”9.2 m
Brin de folie Deep draft (Jeanneau)
1975
29’ 6”9 m
Gib'Sea 96 Deep draft (Gibert Marine)
1983
31’ 10”9.7 m
Melody Standard (Jeanneau)
1976
33’ 7”10.25 m
Romanée Shoal draft (Pouvreau)
1973
33’ 6”10.2 m
Dufour 4800 Deep draft (Dufour)
1981
34’ 11”10.65 m
Jouët 920 Deep draft (Yachting France)
1979
30’ 5”9.27 m
Sun Odyssey 36 Deep draft (Jeanneau)
1989
35’ 5”10.8 m
Feeling 1090 Deep draft (Kirié)
1986
35’ 6”10.81 m
Fruit de mer Fin keel (Form'Océan)
1981
35’ 7”10.85 m
Dufour 3800 Deep draft (Dufour)
1980
30’ 6”9.3 m
Boat-Specs.com uses cookies to improve user experience. By using our website you consent to all cookies in accordance with our Cookie Policy.

Read more