The Oyster 745 is as well listed, on Boat-Specs.com, in version Keel and centerboard.
|Oyster 745's Main Features|
|Type of hull||Monohull|
|Category||Offshore deck saloon cruising sailboat|
|Construction||GRP (glass reinforced polyester)|
|First built hull||2014|
|Last built hull||Still in production|
L-shaped keel (with bulb)
|Rudder||2 spade rudders|
|Standard public price ex. VAT (indicative only)||About
4 440 000 €(2016)
|Oyster 745's Main dimensions|
|Length overall||74’ 7”|
|Hull length||71’ 8”|
|Waterline length||65’ 10”|
|Beam (width)||19’ 5”|
|Mast height from DWL||110’ 7”|
|Light displacement||115963 lbs|
|Oyster 745's Rig and sails|
|Upwind sail area||3001 sq.ft|
|Rigging type||Sloop Marconi 9/10|
|Mast position||Keel stepped mast|
|Spars||Mast and boom in Aluminum|
|Number of levels of spreaders||3|
|Oyster 745's Performances|
|Upwind sail area to displacementiThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.
The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size. Upwind : under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 23 it indicates a fast sailboat.
|Displacement-Length ratio (DLR)iThe Displacement Length ratio is a figure that points out the boat's weight compared to its waterline length. DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet).
The DLR can be used to compare the relative mass of different sailboats no matter what their length: a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat.
|Hull speediAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed".
The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34.
|Oyster 745's Auxiliary engine|
|Engine type||Inboard engine|
|Fuel tank capacity||528.3 gal|
|Oyster 745's Accommodation|
|Cabin(s) (min/max)||3 / 5|
|Berth(s) (min/max)||6 / 10|
|Fresh water tank capacity||396.3 gal|